This rig is simply dominating. Just everything looks compact in the case. But, this is just load of pure awesomeness. Good job!

@rBennich

2 жыл бұрын

Very fitting to use Nazi color theme. :)

I did not expect anything less from best overclockers in the world but still great job. Overkill is always a great way :) Thank you for this video

Για άλλη μια φορά εξαιρετική δουλειά!!

@OverclockedGamingSystemsOGS

5 жыл бұрын

ευχαριστούμε :D

At 2:14 👏 slow 👏clap 👏 lol, difficulty level of doing that smoothly on this mobo is the golf equivalent of birdying a hole with a long putt and a curvy green 👍🏼

Hi ! As much as I use ASUS boards this one has beaten me up, this is actually my second review. I'm posting this message to hopefully get the attention of someone at ASUS that will address the problem with these boards. I am fortunate enough to have purchased more than one for system builds. I purchased the first board over a month ago and I could never get the board to post, Q-code 00 is as far as I got. I turned off and on numerous times before it finally started, then I let the board sit overnight and then tried to start it, same problem. Newegg did RMA for new board, same problem. I figured I would contact ASUS, after trouble shooting with tech I did RMA with ASUS, however, while I was waiting for the board to be repaired I decided to purchase one from another store thinking that Newegg may have gotten a bad batch, the board worked!, that was odd to say the least. I looked at the serial numbers and the board from another store that was actually an earlier model, serial starting with K3, the board I sent in for repairs starts with K4. Finally ASUS let me know they would be sending a new board, when I received the replacement I looked at the serial number I figured it was the newest release, serial started with K5. I immediately set the board up and had the same problem as my K4 board. I am presently trying to get a video to ASUS so that I could show them what I did to make the board POST but they say they cannot open the file. Months ago I saw a video of a guy having the same problem booting the board after it sits for 2 hours or more, I searched "cold boot problems" and saw a video of a guy with an ASUS board that would not boot after it sat for a period of time. So I turned on my board Q-code stayed at 00, I turned on the blow dryer, blew heat over Q-code area and the board started right away. It seems that something is wrong at ASUS manufacture and tech support cannot really help they ask you to repeat all the steps that you have already done, I would just ask how long have you been building PCs to establish credibility. I usually don't post reviews but this has really been a disappointment and I am still trying to figure it out with a new board from ASUS, how can you honor a warranty if you cannot replace a bad product with a good one. So if any of you want to see your board start just blow a little heat on it for about 10 seconds you will be suprised. You Board S/N : K1 or K2 or K3 ?? Thanks ,Best Regards,Alex

Next time, please use more thermal paste on the cpu. I was only half filled up with the thermal paste. But very good looking build

@mr.z1992

5 жыл бұрын

TGDxDrakoon yeah, at least 11% more and 53% more emphasis on perpendicular lines but don’t for at least an eight more on the bottom left quadrant. Honestly, shameful, shameful I say. This whole build is ruined for me now🙄🤫 😜

Awesome timelapse! How would Xeon Platinum 8180 compare to the Xenon 3175 you used in video?

@OverclockedGamingSystemsOGS

5 жыл бұрын

thanks! If I am not mistaken the 3175 is a 8180 that can be overclocked but hasn't the ability of the 8180 to be run on multisocket platforms (like you cannot have 2 of these running simultaneously). Overall 1v1 the 3175 is faster due to the higher clocks.

Sick build! I sure hope thats not the famous 2820 card 😁

@OverclockedGamingSystemsOGS

5 жыл бұрын

Thanks! nah, kept the 2820 one for some more oc ^^

@dustinthomas2998

5 жыл бұрын

just out of curiosity what Thermal paste do you use for OC?

@dustinthomas2998

5 жыл бұрын

@Stavros Savvopoulos I thought maybe you were using kryonaut LH edition. I have had some pretty good scores using KPx but it cracks easy past -145 I have been curious how the kryonaut liquid helium does on these cards

@OverclockedGamingSystemsOGS

5 жыл бұрын

@@dustinthomas2998 Yeah - thats what I meant. Kryonaut LH is kinda an unofficial term. Seems to be better than "normal" Kryonaut while having the good thermal conductivity that Kryonaut delivers.

@dustinthomas2998

5 жыл бұрын

@@OverclockedGamingSystemsOGS Nice PR score I was getting a little to comfortable there in the top 5😁 Nice score!!

Greeting from usa and a fellow born kavala boy. Cool build but show us what it can do!

Asus and other companies don't know that you exist

We all know that no body sponsored your video

Ok listen

colors peru