В комплекте должен идти титановый молоток от Milwaukee за 440$ 😂😂😂 я
@dustylumberco
8 ай бұрын
@@user-hd6wi812 it’s $369 USD for the tools and $599 with a charger and 2 batteries
@traviswillard48418 ай бұрын
Cordless tool that has now been tethered by a vacuum hose.😂
@NaturalBBler
7 ай бұрын
I never understand that, the same with cordless saw, but have a hose to the vaccum 😅
@veganpotterthevegan
6 ай бұрын
@@NaturalBBlernobody is making him use that. Its just available as an option. Their cordless tools also have significantly more power than their corded tools so it's not all about going cordless to not have a cord. *I have a Festool corded track saw knowing full well that the cordless tool is better. But I don't have a lot of Festool tools and I know I'd have unused batteries sitting around getting damaged from sitting so I went corded for my Festool things.
@Resistculturaldecline
6 ай бұрын
My makita recip is cordless AND hoseless.
@the_undead
6 ай бұрын
@@NaturalBBlerthere are portable shop vacuums that you can buy, I imagine those are the intended tool for dust collection, but if you're in a decto would working shop that has dust collection ports everywhere then no matter where you are you can just hook this thing up to dust collection (I have also seen dust collection ports that have the hose wound on a spool so you can get quite far without the hose taking up too much space)
@EikottXD
6 ай бұрын
@@veganpotterthevegandid you just say cordless is stronger than corded?
@jirizary738 ай бұрын
Just what I need. A twelve hundred dollar Sawzall.
@Gfysimpletons
8 ай бұрын
Ah ah ahhh, that’s a reciprocating saw. Not a sawzall!
@OliverDiGeronimo009
7 ай бұрын
My Bosch does the same thing for only a hundred-and-twenty bucks!
@nooneyouknowhere6148
7 ай бұрын
@@GfysimpletonsMilwaukee invented the tool and theirs is called a sawzall. Therefore in the construction industry all those type saws are referred to as sawzalls.
@joshlewis575
6 ай бұрын
@@Gfysimpletonsit's definitely a sawzall
@zack9912000
6 ай бұрын
Yea, it is an expensive pos that your kids' toys are built better than this thing.
@GaryThatsgary9 ай бұрын
Wow that seems to cut things in a very similar way to my 60 quid one.
@aberba
8 ай бұрын
😂
@NotABot88
8 ай бұрын
Theres no vibration
@joshlewis575
6 ай бұрын
@NotABot88 not a chance, less vibration then standard brands maybe. None, no way
@NotABot88
6 ай бұрын
@@joshlewis575 Do you own one?
@FireBarrels
6 ай бұрын
@@NotABot88 He turned on the orbital so i doubt there's no vibration.
@Lyonscarpentry9 ай бұрын
Honestly, the vacuum attachment is a waste of time on a recip lol
@ogCANICA
9 ай бұрын
Glad I'm not the only who thought that 😂
@rickyperkins232
9 ай бұрын
Honest to speak and that's how they sell the stool to guys like dusty
@TheDeadbirdy
9 ай бұрын
That vacuum attachment is a time saver when it comes to clean up and breathing.
@landonpratte846
9 ай бұрын
@@rickyperkins232you think Dusty’s buying these?
@Lyonscarpentry
9 ай бұрын
@@TheDeadbirdyhow though? Did you watch the video? It picked up barely anything, vacuum on things like track saw yes ok works good but recip no
@ChevyDex3158 ай бұрын
Tune in next week when they add a vac attachment to a framing hammer 😂😂😂
@agent7agent759
8 ай бұрын
Best would be a vacuum centipede, vacuum sucks out the vacuum and so on , Dusty will buy it immediately
@NotABot88
8 ай бұрын
Facts
@dennislinden36579 ай бұрын
Even the CEO of feztool cant afford the tools.
@milkod2001
7 ай бұрын
I.d buy Feztool at 10% if it was exact copy made in China lol.
@TheSeriesofTubes
6 ай бұрын
I’m not a professional woodworker and it’s all I buy. You sound broke and cranky
@zack9912000
6 ай бұрын
No, he uses tools that last and are not full of plastic parts.
@dennislinden3657
6 ай бұрын
@@TheSeriesofTubes 1 outta 2 ain't bad.
@andymagic2924
3 ай бұрын
@@zack9912000No modern tools last really and they are all made of plastic, what sets one brand apart from another is performance
@colinmccarthy99808 ай бұрын
He doesn't spend a dime on these tools. He's sponsored. Love his videos of joining everything
@jerth8 ай бұрын
Expensive as hell and still totally outclassed by an M18 fuel sawzall
@jerth
8 ай бұрын
@HumansAreCarnivoresNotCows I guarantee your hands are too soft to use either for more than 20 minutes so what are you even doing in these comments muppet?
@simpson4237
8 ай бұрын
Lol even my old $50 cordless ryobi can do that, all it needs is a good blade.
@jerth
8 ай бұрын
@@simpson4237 Oh for sure, it definitely can, but if you've ever had to use a variety of these tools professionally you'll quickly come to realize how awful and underpowered most sawzalls actually are, this ridiculous festool one included. The Fuel is one of the only actually pleasant ones to use and outclasses this nonsense handily.
@simpson4237
8 ай бұрын
@@jerth ive used them all and if I was going to spend a premium on a tool I'd go Milwaukee, I just like being the idiot on the job site with my cheap ass neon green Milwaukee. No one steals them, and in the end rigid, Milwaukee, and ryobi all made in the same ITT factory lol
@davidelizondo3970
8 ай бұрын
@@simpson4237i dont blame u i love milwaukee so does my boss but him being the gc he started using rigid after soo many of his tools walked of jobsites jus keeps his milwaukees at the warehouse now
@enjoylife4949 ай бұрын
Something’s Festool shouldn’t do. This is one of them!
@TheLastPharm
8 ай бұрын
I kinda think you're right on this one.
@reelanmchugh8124
8 ай бұрын
Yeh, they should stick to the fine woodworking tools more
@robertrench5061
8 ай бұрын
Put the blade in first then the battery.
@AMG63
8 ай бұрын
@@robertrench5061why ?
@zack9912000
6 ай бұрын
They should not be using plastic gears in their tools, and what should be metal parts are cheap ABS plastic
@joelmason68188 ай бұрын
I suppose there isn't a tool that festool won't over charge you for! Lol
@Gfysimpletons
8 ай бұрын
😊 I’ll stick with my 3 hard wired SAWZALLs and the DeWalt cordless I got at a garage sale for $25…..
@HolgerBo-bh3tn8 ай бұрын
Never connect the battery before the blade ...
@libertarianman69
6 ай бұрын
Why?
@HolgerBo-bh3tn
6 ай бұрын
@@libertarianman69 because without battery the machine cant accidently run and cut your fingers …
@troydonclarke7863
6 ай бұрын
@@HolgerBo-bh3tn if only there was a saftey
@jasonsponsler218 ай бұрын
I’ve never seen a 300.00 saw blade before. Thanks for showing me what not to buy
@DanBombadil8 ай бұрын
You are going to have start calling yourself the "Dustless Lumber Company" soon! Lol
@dustylumberco
8 ай бұрын
🤣 My name is actually Dustin but I've always gone by Dusty
@complexeddrummer8 ай бұрын
I'm really trying to wrap my head around why Festool thought they'd sell even a single sawzall. Anyone that needs a sawzall is going to Home Depot and buying a DeWalt for 80 bucks. I don't doubt that this is a very well put together saw, but a sawzall is a demolition tool and is expected to get the living crap beat out of it by subcontractors. I don't think any demo or construction contractor has even heard of Festool, let alone willing to pay for Festool when their 20 year old DeWalt is still working
@agentchodybanks9120
5 ай бұрын
some people may already be on the festool battery platform
@andymagic2924
3 ай бұрын
I wouldn't have a DeWalt given 😂
@87wolverine8 ай бұрын
I can’t imagine a framer using this 😂
@Just-Steve8 ай бұрын
$370 before tax and shipping for a reciprocating saw. Unbelievable.
@thehashslingingslasher88
8 ай бұрын
Not nearly as much as I was expecting but still steep
@sumguyonabike8776
7 ай бұрын
That's the bare model with no batterys isn't it. In UK for 2 x 5amp with it is 670quid
@Just-Steve
7 ай бұрын
@@sumguyonabike8776 🤣
@jimeverden22449 ай бұрын
The look on your face when you get a new tool. Like a kid in a candy shop 👍
@dustylumberco
8 ай бұрын
😁
@MrTk69698 ай бұрын
This dude spent $875 for the Sawzall and then 2700 for the vacuum cleaner and all the dust still went on the floor
@busted-sf2809
8 ай бұрын
wtf the dust not.
@phil2782
7 ай бұрын
Didn't spend shit. Sent by festool for free. Hell, he probably got paid by them as well.
@busted-sf2809
7 ай бұрын
@@phil2782 no they dont pay
@zack9912000
6 ай бұрын
@phil2782 They all are no real woodwork uses this crap they dont last. These tools are garbage.
@andymagic2924
3 ай бұрын
Is festool seriously that expensive over there?
@dagrynch8 ай бұрын
Festool pricing: think of a reasonable price a tool should cost and multiply by 3
@tylerdurden78696 ай бұрын
This looks like something you’d buy your husband off wish when he says he “ really needs some tools this year “
@GermanDaGreat8 ай бұрын
Idk why but Festool looks cheaply made, the box it comes in looks more expensive then the Chinese tool 😊
@carbb5760
7 ай бұрын
I think this is the only tool they have that is not made in Germany
@GermanDaGreat
7 ай бұрын
@@carbb5760 yeah not a fan of how it looks, the box looks amazing, but I personally think Germany has been slacking in their products, the item doesn’t reflect the price and that my opinion, drills are not worth $500-$600 when they are less powerful then Kobalt and Ryobi drills.
@carbb5760
7 ай бұрын
@@GermanDaGreat meh, don’t care much for systainers. Every drill on the market today is powerful enough to do every task required including the festool drills. It’s more about refinement and ergonomics
@GermanDaGreat
7 ай бұрын
@@carbb5760 yeah but I don’t see it being worth $300 more than what’s on the market that’s like charging Lamborghini price for a Volkswagen
@carbb5760
7 ай бұрын
@@GermanDaGreat it’s basically 1.5-2 times more expensive. Like Lexus vs Toyota
@Ural-bz3lh8 ай бұрын
Как быстро он срежет катализатор🗿
@SpeedoDinero22 күн бұрын
Man I've been in carpentry for around 20 yrs, used every damn saw zaw there is. Except this. This is absolutely incredible.
@mianarshed8 ай бұрын
I need this tool too 😊
@dustylumberco
8 ай бұрын
🙌
@bread-gz3rl6 ай бұрын
Ill keep my free dewalt older than me i found in the middle of a 2 lane highway at 2am
@CoppersOnTheRun15 күн бұрын
Can't wait for the Festool screwdriver vacuum attachment!
@lilhyena75348 ай бұрын
this guy owns the FED 😂
@ThefortniteKid2578 ай бұрын
Festool stuff is great but it looks very “Harbor Freighty”
@zack9912000
6 ай бұрын
They are shit quality and make harbor freight look premium quality. At least Harbor Freight uses metal componets, fecaltool uses plastic parts throughout
@6.2Tone20 күн бұрын
The sponsors are amazing for this dude 😂
@Joe___R6 ай бұрын
That dust extraction only caught 10% of the dust.
@asurakodachi6 ай бұрын
Lol the festool flex is strong
@rossfelton195520 күн бұрын
I am sure it's a nice tool. But I have never been disappointed by Milwaukee sawzalls, especially my super sawzal. 27 years as a carpenter. I used a whole lot of different tools.
@PatLizJohnson6 ай бұрын
Wow! It can cut a just as well as my Ridgid Recip that I got for $35 in the clearance section
@violetspider_4 ай бұрын
One thing i like about any not DeWalt tool , especially Milwaukee, Makita and festool is the vibration on all tools are reduced so much compared to DeWalt. On DeWalt after 10 min you need a doctor to open you up and mix your red blood cells with the white again. And it's not just the recip saw. The circular saw is like a petrol chainsaw, the jigsaw is like someone pushing your elbow while trying to use it and the multi tool can be used to vibrate fresh concrete or/and if you don't like your neighbours vibrate their house into dust. The planer should be called a jet plane or at least a honda cbx 1000. I think Hamas was using DeWalt to cover their tunnels being made.
@ns_racing8 ай бұрын
You can get the Dewalt Flexvolt for $249 with a 9ah Flexvolt battery and I would dare say it would smoke that recip. To each his own though no hate
@preston88597 ай бұрын
2 years later 60k for that truck seems crazy.
@slapjohnson63878 ай бұрын
I’d have that sour smirk too if they sent me festtool tools too🙄
@zack9912000
6 ай бұрын
Dont forget the check for lying how great it is
@JgHaverty8 ай бұрын
Festool is a whole eco system at this point lol. Will say that dust collection is on point!
@dustylumberco
8 ай бұрын
👍
@Gfysimpletons
8 ай бұрын
And an electric vacuum! 😂😂 Silliness!
@luciusirving59262 ай бұрын
For large wood with nails, I'd use a panel hacksaw saw.
@kraniumfilms46098 ай бұрын
Damn my Milwaukee does the same thing
@nathanmohr10276 ай бұрын
“One BILLION dollars!” Muwahaha
@mtraven237 ай бұрын
at this point, he is a Fes-Tool
@leopfaltzgraff29819 ай бұрын
Realistically he had to stop and replace the battery 3x
@florpdorp71908 ай бұрын
Is best plastic money can buy
@yamyamirfan16028 ай бұрын
Finally a tool that i can trade in gor my house! Damn!
@danashay8 ай бұрын
Wow. Nobody does it like Festool. If Batman worked with wood, the Bat cave has a Festool room. Overcomplicated? A little. Well thought out? Damned right. These tools deserve to be displayed, just like you do it. Where else are we gonna get this?! Bravo!
@zack9912000
6 ай бұрын
You clearly dont have a clue about these overpriced turds. Some of the worst quality parts are for a tool. Feel free to watch AVEs channel, where he breaks down how terrible these are.
@leomarq7 ай бұрын
Mannn you got MONEY!
@BruthaKoop9 ай бұрын
Can never have too much dust extraction when you do everything indoors!!! The lung protection is worth it 100%
@dustylumberco
8 ай бұрын
👍
@mybossisdrunk
8 ай бұрын
So cringe
@ben684424 ай бұрын
No. Sawzalls are meant to get beaten up a bit. Maybe for the wood shop but not on site.
@bunnysparklzbunnytime51179 ай бұрын
Chainsaw would have been quicker
@LifestyleNotOfTheRichAndFamous8 ай бұрын
"No dusty lumber co" time to rename your channel. Takes all the fun of wood working, the organization skills of dexter. 😂, such a beautiful shop. Keep breaking hearts.
@dexterjsullen7 ай бұрын
Did it even catch any dust
@andsowot6 ай бұрын
Sped up over the course of an afternoon if festool's other weak motors are anything to to by?
@brandibright208217 күн бұрын
I've got to get me a channel I do cabinetry but might not be as good as him yet awesome tool we use all festool sanders and they are great most of our routers are kreg awesome videos man. Clay from mobile Alabama
@willbirch25379 ай бұрын
I can appreciate the grin on his face at every unboxing
@dustylumberco
9 ай бұрын
😁😁
@miningexcavator8 ай бұрын
This channel is shallow quality now, with no craft, just showing off expensive tools
@LVC85costa8 ай бұрын
I miss when you made stuff. Cheers
@heathkill48216 ай бұрын
The blades are nice
@gordr80248 ай бұрын
Ya don’t get the Festool kick, that dust extraction part cost you $800 the rest of the saw cast $300
@ionbuga7488Ай бұрын
Can you show your stand where the Gestik tools are? How much does it all cost?
@boona19527 ай бұрын
The Legend with Legendary tools.
@zack9912000
6 ай бұрын
these tools are as legendary as bidens speaking abilities
@bartfoster13118 ай бұрын
This is basically a copy of the Flex saw changed to 18v and made in China. Evidently the Europeans don't really use recip saws much. Personally the 36v Metabo HPT orbital recip is my favorite and it is an absolute beast!
@chipsammich20786 ай бұрын
My Milwaukee does same thing.. 1/4 of the cost
@ERone437 ай бұрын
Harbor freight til the plastic gears fall off!
@zack9912000
6 ай бұрын
Harbor freight at least uses bearings and metal gears, unlike this crap that uses bushings and plastic injected gears.
@proofna9 ай бұрын
Festool tools too expensive😔😔
@lewisj4838
9 ай бұрын
He probably got them for free.
@mitchbfc86
9 ай бұрын
@@lewisj4838yes...
@GaryThatsgary
9 ай бұрын
Fashion tools
@dustylumberco
8 ай бұрын
This one is $369 for the tool and if you get it with a charger and 2 batteries it’s $599. Not as expensive as people usually assume
@connorpitcher2846
8 ай бұрын
@@dustylumbercobrother 369 usd for a reciprocating saw is madness. is it 1 1/8 stroke? The m18 super sawzall is no more than $250 tool only
@Mrinventor938 ай бұрын
Herramientas muy utiles para el mundo de la carpintería😊
@harry33388 ай бұрын
Thats the first time i saw dust collection on a reciprocating saw
@mindaugasalkevicius27226 ай бұрын
FESTOOL IS👍💥😀
@zack9912000
6 ай бұрын
They are crap, do some basic research
@alexandreperrinmortier91706 ай бұрын
Commence à me saouler toutes ces vidéos festool.
@aldrincarbon43886 ай бұрын
Wow nice
@dr.mabuse7798 ай бұрын
I just read here that it's too expensive, I don't need it, I love using my Milwaukee. I'm just saying, quality has its price. Sure, I can get from A to B in a Peugeot 207. I can comfortably drive from A to B in a Maybach.
@59tv88 ай бұрын
best tools and best skills master..❤
@mr.dankman8 ай бұрын
I have a sneaking suspicion that this guy is sponsored by someone
@Michigan18 ай бұрын
Festool - $2000 Dewalt - $150 Outcome = Cut
@paulhopkins19055 ай бұрын
Just like their drill driver, 3 times more expensive than Makita, likely less power than Ryobi. I'm sure the Fescult will rave about it's ergonomics and how amazing the systainer case is
@jackhernandez98288 ай бұрын
So what's the vacuum for?
@Raizo83Ozunu8 ай бұрын
As always, very well explained 😂
@gabe21288 ай бұрын
The bourgeoiest recip saw I've ever seen
@TheDeadbirdy9 ай бұрын
Looks smooth like Flex model And definitely more smooth than my Makita brushless saw
@dustylumberco
8 ай бұрын
👏
@user-fy6zh6pu8x6 ай бұрын
It looks very much like the djr 187 Makita, but it probably stands like an airplane.
@teannatrump26226 ай бұрын
What’s the hose for?
@mitchellcox19124 ай бұрын
I thought you was going to do some shooting. The way you unpacked it.
@BarneyTheDinosaur8D6 ай бұрын
you can tell the post was in hot water prior to video
@gerardedgar59618 ай бұрын
Yes, that's fine so of course, but that's just an old piece of old dried out pine. try a nice piece of oak that size. It'll cut it. It won't be as fast if it cut it. No we'll probably no problem.😅
@harveywallbanger37268 ай бұрын
Yes,but can you pivot the handle for a more comfortable grip while cutting? My larger Ridgid can 👍 Both are reciprocating/oscillating saws and I use them more then my Milwaukee's, DeWalt's or Bosh
@donalfitzpatrick77377 ай бұрын
What brand is it ?
@slodziaksos6 ай бұрын
Stare drewno iglaste. Idzie jak wściekła. 👌
@Zealous_Tutorials3 ай бұрын
Can you resaw lumbar with this?
@AffordBindEquipment8 ай бұрын
Battery works out of the box?
@NICKLETT18 ай бұрын
This guy has to have about $500,000 worth of tools
@zack9912000
6 ай бұрын
He was told that is what they are worth 😂 I give him $2.50 for the crap to recycle
@brooklynsoundproofing8 ай бұрын
I couldn't imagine bringing a $1000 vacuum into a demo project just to hook up one sawzall while everything else is causing more dust doesn't seem logical.
@lauramagagnoli77506 ай бұрын
People dont understand festool is for fine wood working yea its over priced but fine wood workers like the brand just like every other brand
@zack9912000
6 ай бұрын
Its over priced fashion statement that fails when actually used. Watch AVEs tear down its disgusting what they consider high-end. Plastic gears and bushing instead of bearings. Cheap componets that childs toy is built better
@lauramagagnoli7750
6 ай бұрын
@@zack9912000 yea but its people’s preference its what gets their work done same reason i use Milwaukee its preference
@mikehunt27658 ай бұрын
Here's a good one... If I say "sawzall".... Thoughts?
@adolfshitler
8 ай бұрын
That's the way to do it 👍
@maxverdi40076 ай бұрын
I was sold at the case
@eurithmicsrocks6 ай бұрын
Not everything needs it's own hard case
@danielharphamgist8029Ай бұрын
Much safer than the massive skill saw. Lols. So many festool haters commenting. Jelly much?
Пікірлер: 614
One million dollars for a demolition tool
@georgeb.wolffsohn30
9 ай бұрын
That's what I was thinking, too.
@user-hd6wi812
9 ай бұрын
stop it will ya. its $2379. tool only😂😂😂😂
@suciolife
9 ай бұрын
the mercedes benz of tools
@leopold5685
8 ай бұрын
В комплекте должен идти титановый молоток от Milwaukee за 440$ 😂😂😂 я
@dustylumberco
8 ай бұрын
@@user-hd6wi812 it’s $369 USD for the tools and $599 with a charger and 2 batteries
Cordless tool that has now been tethered by a vacuum hose.😂
@NaturalBBler
7 ай бұрын
I never understand that, the same with cordless saw, but have a hose to the vaccum 😅
@veganpotterthevegan
6 ай бұрын
@@NaturalBBlernobody is making him use that. Its just available as an option. Their cordless tools also have significantly more power than their corded tools so it's not all about going cordless to not have a cord. *I have a Festool corded track saw knowing full well that the cordless tool is better. But I don't have a lot of Festool tools and I know I'd have unused batteries sitting around getting damaged from sitting so I went corded for my Festool things.
@Resistculturaldecline
6 ай бұрын
My makita recip is cordless AND hoseless.
@the_undead
6 ай бұрын
@@NaturalBBlerthere are portable shop vacuums that you can buy, I imagine those are the intended tool for dust collection, but if you're in a decto would working shop that has dust collection ports everywhere then no matter where you are you can just hook this thing up to dust collection (I have also seen dust collection ports that have the hose wound on a spool so you can get quite far without the hose taking up too much space)
@EikottXD
6 ай бұрын
@@veganpotterthevegandid you just say cordless is stronger than corded?
Just what I need. A twelve hundred dollar Sawzall.
@Gfysimpletons
8 ай бұрын
Ah ah ahhh, that’s a reciprocating saw. Not a sawzall!
@OliverDiGeronimo009
7 ай бұрын
My Bosch does the same thing for only a hundred-and-twenty bucks!
@nooneyouknowhere6148
7 ай бұрын
@@GfysimpletonsMilwaukee invented the tool and theirs is called a sawzall. Therefore in the construction industry all those type saws are referred to as sawzalls.
@joshlewis575
6 ай бұрын
@@Gfysimpletonsit's definitely a sawzall
@zack9912000
6 ай бұрын
Yea, it is an expensive pos that your kids' toys are built better than this thing.
Wow that seems to cut things in a very similar way to my 60 quid one.
@aberba
8 ай бұрын
😂
@NotABot88
8 ай бұрын
Theres no vibration
@joshlewis575
6 ай бұрын
@NotABot88 not a chance, less vibration then standard brands maybe. None, no way
@NotABot88
6 ай бұрын
@@joshlewis575 Do you own one?
@FireBarrels
6 ай бұрын
@@NotABot88 He turned on the orbital so i doubt there's no vibration.
Honestly, the vacuum attachment is a waste of time on a recip lol
@ogCANICA
9 ай бұрын
Glad I'm not the only who thought that 😂
@rickyperkins232
9 ай бұрын
Honest to speak and that's how they sell the stool to guys like dusty
@TheDeadbirdy
9 ай бұрын
That vacuum attachment is a time saver when it comes to clean up and breathing.
@landonpratte846
9 ай бұрын
@@rickyperkins232you think Dusty’s buying these?
@Lyonscarpentry
9 ай бұрын
@@TheDeadbirdyhow though? Did you watch the video? It picked up barely anything, vacuum on things like track saw yes ok works good but recip no
Tune in next week when they add a vac attachment to a framing hammer 😂😂😂
@agent7agent759
8 ай бұрын
Best would be a vacuum centipede, vacuum sucks out the vacuum and so on , Dusty will buy it immediately
@NotABot88
8 ай бұрын
Facts
Even the CEO of feztool cant afford the tools.
@milkod2001
7 ай бұрын
I.d buy Feztool at 10% if it was exact copy made in China lol.
@TheSeriesofTubes
6 ай бұрын
I’m not a professional woodworker and it’s all I buy. You sound broke and cranky
@zack9912000
6 ай бұрын
No, he uses tools that last and are not full of plastic parts.
@dennislinden3657
6 ай бұрын
@@TheSeriesofTubes 1 outta 2 ain't bad.
@andymagic2924
3 ай бұрын
@@zack9912000No modern tools last really and they are all made of plastic, what sets one brand apart from another is performance
He doesn't spend a dime on these tools. He's sponsored. Love his videos of joining everything
Expensive as hell and still totally outclassed by an M18 fuel sawzall
@jerth
8 ай бұрын
@HumansAreCarnivoresNotCows I guarantee your hands are too soft to use either for more than 20 minutes so what are you even doing in these comments muppet?
@simpson4237
8 ай бұрын
Lol even my old $50 cordless ryobi can do that, all it needs is a good blade.
@jerth
8 ай бұрын
@@simpson4237 Oh for sure, it definitely can, but if you've ever had to use a variety of these tools professionally you'll quickly come to realize how awful and underpowered most sawzalls actually are, this ridiculous festool one included. The Fuel is one of the only actually pleasant ones to use and outclasses this nonsense handily.
@simpson4237
8 ай бұрын
@@jerth ive used them all and if I was going to spend a premium on a tool I'd go Milwaukee, I just like being the idiot on the job site with my cheap ass neon green Milwaukee. No one steals them, and in the end rigid, Milwaukee, and ryobi all made in the same ITT factory lol
@davidelizondo3970
8 ай бұрын
@@simpson4237i dont blame u i love milwaukee so does my boss but him being the gc he started using rigid after soo many of his tools walked of jobsites jus keeps his milwaukees at the warehouse now
Something’s Festool shouldn’t do. This is one of them!
@TheLastPharm
8 ай бұрын
I kinda think you're right on this one.
@reelanmchugh8124
8 ай бұрын
Yeh, they should stick to the fine woodworking tools more
@robertrench5061
8 ай бұрын
Put the blade in first then the battery.
@AMG63
8 ай бұрын
@@robertrench5061why ?
@zack9912000
6 ай бұрын
They should not be using plastic gears in their tools, and what should be metal parts are cheap ABS plastic
I suppose there isn't a tool that festool won't over charge you for! Lol
@Gfysimpletons
8 ай бұрын
😊 I’ll stick with my 3 hard wired SAWZALLs and the DeWalt cordless I got at a garage sale for $25…..
Never connect the battery before the blade ...
@libertarianman69
6 ай бұрын
Why?
@HolgerBo-bh3tn
6 ай бұрын
@@libertarianman69 because without battery the machine cant accidently run and cut your fingers …
@troydonclarke7863
6 ай бұрын
@@HolgerBo-bh3tn if only there was a saftey
I’ve never seen a 300.00 saw blade before. Thanks for showing me what not to buy
You are going to have start calling yourself the "Dustless Lumber Company" soon! Lol
@dustylumberco
8 ай бұрын
🤣 My name is actually Dustin but I've always gone by Dusty
I'm really trying to wrap my head around why Festool thought they'd sell even a single sawzall. Anyone that needs a sawzall is going to Home Depot and buying a DeWalt for 80 bucks. I don't doubt that this is a very well put together saw, but a sawzall is a demolition tool and is expected to get the living crap beat out of it by subcontractors. I don't think any demo or construction contractor has even heard of Festool, let alone willing to pay for Festool when their 20 year old DeWalt is still working
@agentchodybanks9120
5 ай бұрын
some people may already be on the festool battery platform
@andymagic2924
3 ай бұрын
I wouldn't have a DeWalt given 😂
I can’t imagine a framer using this 😂
$370 before tax and shipping for a reciprocating saw. Unbelievable.
@thehashslingingslasher88
8 ай бұрын
Not nearly as much as I was expecting but still steep
@sumguyonabike8776
7 ай бұрын
That's the bare model with no batterys isn't it. In UK for 2 x 5amp with it is 670quid
@Just-Steve
7 ай бұрын
@@sumguyonabike8776 🤣
The look on your face when you get a new tool. Like a kid in a candy shop 👍
@dustylumberco
8 ай бұрын
😁
This dude spent $875 for the Sawzall and then 2700 for the vacuum cleaner and all the dust still went on the floor
@busted-sf2809
8 ай бұрын
wtf the dust not.
@phil2782
7 ай бұрын
Didn't spend shit. Sent by festool for free. Hell, he probably got paid by them as well.
@busted-sf2809
7 ай бұрын
@@phil2782 no they dont pay
@zack9912000
6 ай бұрын
@phil2782 They all are no real woodwork uses this crap they dont last. These tools are garbage.
@andymagic2924
3 ай бұрын
Is festool seriously that expensive over there?
Festool pricing: think of a reasonable price a tool should cost and multiply by 3
This looks like something you’d buy your husband off wish when he says he “ really needs some tools this year “
Idk why but Festool looks cheaply made, the box it comes in looks more expensive then the Chinese tool 😊
@carbb5760
7 ай бұрын
I think this is the only tool they have that is not made in Germany
@GermanDaGreat
7 ай бұрын
@@carbb5760 yeah not a fan of how it looks, the box looks amazing, but I personally think Germany has been slacking in their products, the item doesn’t reflect the price and that my opinion, drills are not worth $500-$600 when they are less powerful then Kobalt and Ryobi drills.
@carbb5760
7 ай бұрын
@@GermanDaGreat meh, don’t care much for systainers. Every drill on the market today is powerful enough to do every task required including the festool drills. It’s more about refinement and ergonomics
@GermanDaGreat
7 ай бұрын
@@carbb5760 yeah but I don’t see it being worth $300 more than what’s on the market that’s like charging Lamborghini price for a Volkswagen
@carbb5760
7 ай бұрын
@@GermanDaGreat it’s basically 1.5-2 times more expensive. Like Lexus vs Toyota
Как быстро он срежет катализатор🗿
Man I've been in carpentry for around 20 yrs, used every damn saw zaw there is. Except this. This is absolutely incredible.
I need this tool too 😊
@dustylumberco
8 ай бұрын
🙌
Ill keep my free dewalt older than me i found in the middle of a 2 lane highway at 2am
Can't wait for the Festool screwdriver vacuum attachment!
this guy owns the FED 😂
Festool stuff is great but it looks very “Harbor Freighty”
@zack9912000
6 ай бұрын
They are shit quality and make harbor freight look premium quality. At least Harbor Freight uses metal componets, fecaltool uses plastic parts throughout
The sponsors are amazing for this dude 😂
That dust extraction only caught 10% of the dust.
Lol the festool flex is strong
I am sure it's a nice tool. But I have never been disappointed by Milwaukee sawzalls, especially my super sawzal. 27 years as a carpenter. I used a whole lot of different tools.
Wow! It can cut a just as well as my Ridgid Recip that I got for $35 in the clearance section
One thing i like about any not DeWalt tool , especially Milwaukee, Makita and festool is the vibration on all tools are reduced so much compared to DeWalt. On DeWalt after 10 min you need a doctor to open you up and mix your red blood cells with the white again. And it's not just the recip saw. The circular saw is like a petrol chainsaw, the jigsaw is like someone pushing your elbow while trying to use it and the multi tool can be used to vibrate fresh concrete or/and if you don't like your neighbours vibrate their house into dust. The planer should be called a jet plane or at least a honda cbx 1000. I think Hamas was using DeWalt to cover their tunnels being made.
You can get the Dewalt Flexvolt for $249 with a 9ah Flexvolt battery and I would dare say it would smoke that recip. To each his own though no hate
2 years later 60k for that truck seems crazy.
I’d have that sour smirk too if they sent me festtool tools too🙄
@zack9912000
6 ай бұрын
Dont forget the check for lying how great it is
Festool is a whole eco system at this point lol. Will say that dust collection is on point!
@dustylumberco
8 ай бұрын
👍
@Gfysimpletons
8 ай бұрын
And an electric vacuum! 😂😂 Silliness!
For large wood with nails, I'd use a panel hacksaw saw.
Damn my Milwaukee does the same thing
“One BILLION dollars!” Muwahaha
at this point, he is a Fes-Tool
Realistically he had to stop and replace the battery 3x
Is best plastic money can buy
Finally a tool that i can trade in gor my house! Damn!
Wow. Nobody does it like Festool. If Batman worked with wood, the Bat cave has a Festool room. Overcomplicated? A little. Well thought out? Damned right. These tools deserve to be displayed, just like you do it. Where else are we gonna get this?! Bravo!
@zack9912000
6 ай бұрын
You clearly dont have a clue about these overpriced turds. Some of the worst quality parts are for a tool. Feel free to watch AVEs channel, where he breaks down how terrible these are.
Mannn you got MONEY!
Can never have too much dust extraction when you do everything indoors!!! The lung protection is worth it 100%
@dustylumberco
8 ай бұрын
👍
@mybossisdrunk
8 ай бұрын
So cringe
No. Sawzalls are meant to get beaten up a bit. Maybe for the wood shop but not on site.
Chainsaw would have been quicker
"No dusty lumber co" time to rename your channel. Takes all the fun of wood working, the organization skills of dexter. 😂, such a beautiful shop. Keep breaking hearts.
Did it even catch any dust
Sped up over the course of an afternoon if festool's other weak motors are anything to to by?
I've got to get me a channel I do cabinetry but might not be as good as him yet awesome tool we use all festool sanders and they are great most of our routers are kreg awesome videos man. Clay from mobile Alabama
I can appreciate the grin on his face at every unboxing
@dustylumberco
9 ай бұрын
😁😁
This channel is shallow quality now, with no craft, just showing off expensive tools
I miss when you made stuff. Cheers
The blades are nice
Ya don’t get the Festool kick, that dust extraction part cost you $800 the rest of the saw cast $300
Can you show your stand where the Gestik tools are? How much does it all cost?
The Legend with Legendary tools.
@zack9912000
6 ай бұрын
these tools are as legendary as bidens speaking abilities
This is basically a copy of the Flex saw changed to 18v and made in China. Evidently the Europeans don't really use recip saws much. Personally the 36v Metabo HPT orbital recip is my favorite and it is an absolute beast!
My Milwaukee does same thing.. 1/4 of the cost
Harbor freight til the plastic gears fall off!
@zack9912000
6 ай бұрын
Harbor freight at least uses bearings and metal gears, unlike this crap that uses bushings and plastic injected gears.
Festool tools too expensive😔😔
@lewisj4838
9 ай бұрын
He probably got them for free.
@mitchbfc86
9 ай бұрын
@@lewisj4838yes...
@GaryThatsgary
9 ай бұрын
Fashion tools
@dustylumberco
8 ай бұрын
This one is $369 for the tool and if you get it with a charger and 2 batteries it’s $599. Not as expensive as people usually assume
@connorpitcher2846
8 ай бұрын
@@dustylumbercobrother 369 usd for a reciprocating saw is madness. is it 1 1/8 stroke? The m18 super sawzall is no more than $250 tool only
Herramientas muy utiles para el mundo de la carpintería😊
Thats the first time i saw dust collection on a reciprocating saw
FESTOOL IS👍💥😀
@zack9912000
6 ай бұрын
They are crap, do some basic research
Commence à me saouler toutes ces vidéos festool.
Wow nice
I just read here that it's too expensive, I don't need it, I love using my Milwaukee. I'm just saying, quality has its price. Sure, I can get from A to B in a Peugeot 207. I can comfortably drive from A to B in a Maybach.
best tools and best skills master..❤
I have a sneaking suspicion that this guy is sponsored by someone
Festool - $2000 Dewalt - $150 Outcome = Cut
Just like their drill driver, 3 times more expensive than Makita, likely less power than Ryobi. I'm sure the Fescult will rave about it's ergonomics and how amazing the systainer case is
So what's the vacuum for?
As always, very well explained 😂
The bourgeoiest recip saw I've ever seen
Looks smooth like Flex model And definitely more smooth than my Makita brushless saw
@dustylumberco
8 ай бұрын
👏
It looks very much like the djr 187 Makita, but it probably stands like an airplane.
What’s the hose for?
I thought you was going to do some shooting. The way you unpacked it.
you can tell the post was in hot water prior to video
Yes, that's fine so of course, but that's just an old piece of old dried out pine. try a nice piece of oak that size. It'll cut it. It won't be as fast if it cut it. No we'll probably no problem.😅
Yes,but can you pivot the handle for a more comfortable grip while cutting? My larger Ridgid can 👍 Both are reciprocating/oscillating saws and I use them more then my Milwaukee's, DeWalt's or Bosh
What brand is it ?
Stare drewno iglaste. Idzie jak wściekła. 👌
Can you resaw lumbar with this?
Battery works out of the box?
This guy has to have about $500,000 worth of tools
@zack9912000
6 ай бұрын
He was told that is what they are worth 😂 I give him $2.50 for the crap to recycle
I couldn't imagine bringing a $1000 vacuum into a demo project just to hook up one sawzall while everything else is causing more dust doesn't seem logical.
People dont understand festool is for fine wood working yea its over priced but fine wood workers like the brand just like every other brand
@zack9912000
6 ай бұрын
Its over priced fashion statement that fails when actually used. Watch AVEs tear down its disgusting what they consider high-end. Plastic gears and bushing instead of bearings. Cheap componets that childs toy is built better
@lauramagagnoli7750
6 ай бұрын
@@zack9912000 yea but its people’s preference its what gets their work done same reason i use Milwaukee its preference
Here's a good one... If I say "sawzall".... Thoughts?
@adolfshitler
8 ай бұрын
That's the way to do it 👍
I was sold at the case
Not everything needs it's own hard case
Much safer than the massive skill saw. Lols. So many festool haters commenting. Jelly much?
Erbauer does exact same job 😊
i stayed with my milwaukee
bye bye I need to add a rafter hook to my sawzall