*** PLEASE READ FIRST * From most reviews below THE DOOR HINGE at the top is the most difficult to figure out. USE black bolts, and the INSIDE SCREW is for adjusting the door ONLY. Do not tighten. Tighten the outside bolts. The inside bolt is designed to bent the bracket in and out so you can adjust the angle of the door when closed. I hope this helps. BTW this video is much better than the factory one. Thanks for doing this video. I wish I had watched yours first

@goobernoodles

2 жыл бұрын

Just got mine yesterday and it's about 70% assembled. Very, very, very useful information. Thank you!

@marilynnstubbs4834

3 ай бұрын

I’m just dealing with this now. Great tip about NOT tightening the inside screw!!! Thank you!!!

@bbrown3996

3 ай бұрын

@@marilynnstubbs4834 glad that helped.

Nice recovery on second door pin. You almost had two left side doors. Great video Thank you

Mine arrives in a week, thanks for the very clear assembly instructions, I had concerns, I no longer have concerns, job well done.

Tip putting in the door pins, make sure the lower grommet is set into the hole before trying to put in the top pin.

Wow, just got mine yesterday and getting ready to tackle it. Your vid shows up when searching along with the manufactures! But unlike Napoleon, you narrate (nice bonus). I have to admit I thought it would be more put together out of the box. Will have to use my old scale model building experience to get this one together. Might be fun! Thanks for the vid.

@thebackyardtradesman7017

2 жыл бұрын

Glad it was helpful! 👍🏻

Thank you for this video, it was very helpful in comparison to Napoleons official assebly video that lacks narration and close ups. It sorted out the screw issue on step 9 as my instruction sheet did not mention the use of the stainless screws. I think it all came together easily and can't see how people complain about the instructions. As a Swede you basically live your life by an IKEA manual anyways. Cheers!

@thebackyardtradesman7017

2 жыл бұрын

Glad it was helpful! Thank you for watching!

Thank you so much for the video, very descriptive and really helpful !

thanks for posting. Looks relatively easy. You explain very well.

Very detailed video. Better than Napoleon’s video - they ought to hire you. Thanks for your efforts!

Mine turns up in two hours :-) Thanks for this video - will help me build it this evening! Cheers as well!

@thebackyardtradesman7017

3 жыл бұрын

Glad I could be helpful!

Beautiful grill I love Napoleon

My new Phantom Natural Gas BBQ is waiting to be unboxed and assembled - this video will be very helpful, in addition to the install booklet. I found this video very helpful! Love the sounds of the kids in the background!

@thebackyardtradesman7017

3 жыл бұрын

Thank you! I’m glad you found it helpful! Thanks for stopping by!

@csebastian71

2 жыл бұрын

Agree. Now I know where those long stainless bolts go. I used the black ones. 😂 Thanks

@cerp3842

2 жыл бұрын

@@csebastian71 Assembly Booklet could be greatly improved - maybe a video would be far more useful and make the assembly a joy - are you listening Napoleon?

COOL !!! Nice grill. I'm in the process of buying a grill, I see that Napoleon gives more than weber, qualitatively, also looks great. At the beginning I wanted to buy a Weber but I think I will choose and buy napoleon. I live in Poland, I have a family in Canada. Have fun grilling BBQ. Regards

Put my grill together this afternoon. Mine went together a bit easier than yours. I ended up with a bunch of extra screws. The right shelf did not seat easy. Hope it gets better over time. Wish the grill had a propane gauge like my old Weber, but I love this grill.

good info on the weight. 200 lbs is a lot in one box. I pick ours up tomorrow and can't weight to get it out of truck. Ibuprofen before pickup!

Just Nevermind the sear station the party that I needed to see

Thank you for this video! I was a bit confused when it came to putting the doors on. Tried calling their customer solutions and they are closed on the weekends.

@thebackyardtradesman7017

2 жыл бұрын

It does take a bit of playing with to get the doors on straight, but it does fit! It would work better with another pair of hands! Good luck! I hope you can figure it out!

does anyone know what the pre-drilled theaded holes on each side of the grill are for? They are below two stainless screws an in a dimple. They seem to be for nothing.

Great video!! Much better than the official one. I haven't actually used it yet because my Napoleon is on it's way. But, I have a question that is concerning to me that maybe you can answer. I have propane run to my pool cabana underground from a large tank. Can I assemble this with the propane inlet hose sticking out the back so I connect to my propane outlet in my cabana instead of inside to a portable tank? Thank you for any insight you may provide.

@thebackyardtradesman7017

Жыл бұрын

Great question, even though I don’t have an official answer I’m gonna say that it shouldn’t be a problem because you can always use a flexible rubber line from the barbecue to the propane line. Hope this helps! 😊

How’s the black color compared to stainless steal

Literally the one thing I clicked on this video for is what you skipped for some reason - the right hand side shelf. TAL

The screws for the sear station side table were too big for the holes, did you run into this same problem?

@drzoidberg1

3 жыл бұрын

The silver screws fit. It's tight at first because the holes are not threaded.

@thebackyardtradesman7017

3 жыл бұрын

There were extra screws, and the instructions were not very clear on which ones to use for the seat station, but they did fit. As mentioned in another comment, the screws may be a tight fit, but do fit!

@ryanfx1

2 жыл бұрын

Tight is an understatement my power drill even binds and they're sticking out.

@ujjwalsaxena16

2 жыл бұрын

@@ryanfx1 Hey Ryan - I’m in the same boat. Did you find a solution for the screws on the side grill?

@ryanfx1

2 жыл бұрын

@@ujjwalsaxena16 yes - get a powered drill and really force it. I know it feels wrong, but what you're doing is creating the threading for the screw to go in. It's the right place for the screws. Bad design - sorry, Napoleon.

so mine, we cannot find any screws in the box..

No wonder why I couldn't get the doors on. The instructions for step 12 show the same two screws to use as in step 11 (not the stainless screws that you installed). Good thing you posted this video. By the way, were you able to find a grill cover? They're all sold out. Happy grilling!

@thebackyardtradesman7017

3 жыл бұрын

Thanks for watching! I’m glad the video was helpful! Yes I finally managed to find a cover, but it took a lot of searching!

@con4man

3 жыл бұрын

I got the doors on with the other screws but they aren't perfectly level and require some lifting in order to get them fully closed. Were you able to get yours to open and close perfectly?

@DumbMoran

3 жыл бұрын

@@con4man I actually called Napoleon's customer service and they actually told me those 5 stainless screws are for another model and to stick with exactly the screws the doors call for. With that in mind, yes, the door's close and open fine on a perfectly level surface, but if you start to move grill about, one of the doors becomes off-level and won't close by itself when it's near the magnet.

@drzoidberg1

3 жыл бұрын

I found that the outside and inside screws for the doors work together. Move both in the same direction to move the top or bottom part of the door. Door misalignment is really noticeable on uneven ground or pavers.

@con4man

3 жыл бұрын

I played around with it on first assembly, but I'll give it another shot one of these days

How do you like this grill?

@thebackyardtradesman7017

2 жыл бұрын

I absolutely love it!

I watched the video to see how the side burner went on.

Where are the side installation

Every video skips the door adjustment. This to me is the only part that's finicky.