As a retired mechanical engineer, I've learned a helluva lot about all kinds of bearings. The first thing I learned was that there's much to learn about them! Until I watched some KZread videos on their manufacture *after* retiring, I often wondered how they were made. This video is the best I've seen! Note that this video features a bicycle hub for example. I've invented & prototyped three different hub-based Continuously Variable Transmissions for bikes, each of which uses bearings in novel ways to achieve the continuously variable feature. We so often take for granted the importance of bearings until we imagine our technological world without them.

@Hypohair

3 жыл бұрын

Engineering is something they never offered at school as a career, annoying as I think it would have appealed to me. I had no idea it existed, working class gals don't get told lol

@AliAli-wi6rc

3 жыл бұрын

Hi

@gopalarao99

3 жыл бұрын

This type of awareness is needed in pre engineering studies to create the zeal in young minds.👌🙏

@carlodave9

Жыл бұрын

Being able to create those little balls altered civilization more than we can fathom. But it all leads back to the invention and evolution of the lathe; which has been transformed by what it created, which transformed what it could create, and so on… It is interesting to see how important lathe technology is in this video. It’s all over the place-not just in what gets manufactured, but also in the creation of what does the manufacturing. Fantastic video!

@Mike_Hughes

Жыл бұрын

@@carlodave9 Good point!

I never thought I would spend 14 minutes watching how steel balls were made, but I'm glad I did. This is an amazing insight into the manufacturing process. The videography is superb. When I saw the subtitle " flashing",. I expected to see a guy in a dirty mac appear. Hats off to to the guys who invented the machines to do, these precise tasks. It is worth noting, however, that it still takes a human to but the balls in a box.. Well done on this very informative video.

@natumikankoba

3 жыл бұрын

E ddr

@camphi1

3 жыл бұрын

Well, you just give the employer a tip to replace a worker with more machines😀.

@BaronSamedi1959

3 жыл бұрын

That man must realize he is only there because a machine would be more expensive than him.

The mechanical engineer coming out with this idea of manufacturing is indeed a true talent.

@benjaminmcfarlane3807

3 жыл бұрын

takes one to know one

@DanHaiduc

3 жыл бұрын

I suspect it was incremental. I suspect initially they were not even burred.

I learned how to rebuild the rear ball bearings on my bike and wondered how they were made. Now I know; thanks for a great video!

Fascinating! I was replacing the bearings in my bicycle wheels when I wondered how they actually made something so precise, strong, consistent and in massive quantities. Now I know. Thanks!

@ellenwang975

4 жыл бұрын

Manufacturer of sputtering target, Email:emily@tianbometal.com / emily18392703515@gmail.com Website:www.bjtianbometal.com / www.tianbometal.com Phone: +86 18392703515(Whatsapp/Skype/WeChat) ,welcome for your inquiry.Thank you.

@randallplaisted9740

3 жыл бұрын

During WWII, one of the main targets were ball bearing factories. Don't live near one!

@Qunyc1985

Жыл бұрын

damn that was the first time you looked at the human world ....and said...."Hey I should fucking pay attention to things I use" Thanks for sharing dumbass

Incredible technology for such a simple thing that we take for granted.

@HobbyOrganist

3 жыл бұрын

Imagine the guy who invented and designed the machines to do this!

@stefeniedavidmusic

3 жыл бұрын

@@HobbyOrganist ...and the cost of development.

@HobbyOrganist

3 жыл бұрын

@@stefeniedavidmusic Well I think most of this technology and the machines to do it were from the 19th century, they had ball bearings in the 1800s so someone figured out how to do it back then, the process and machines being improved since then

@annotten7413

3 жыл бұрын

Victorian Sculptures actually the first ball bearings where made of stone and used in the Roman Empire and we have been making them better ever since. The emperor Nero had a room that spun around on bearings made of stone

@nunyabusiness8538

3 жыл бұрын

you should see the machines that made the fabrics in your clothes. those will blow your mind

One of the most interesting and informative 'How it's Done' videos I have seen - and there are some good ones!

I am just as impressed with the soundtrack for this video as I am with watching the process of the steel. . . . .upbeat, new age futuristic digital tones. Thanks for this video.

@narojo3628

Жыл бұрын

kinda proggy! I'm a musician and I love it. Kind of inspirational

@vernonleon4873

Жыл бұрын

This soundtrack is fire

@vluursy

Жыл бұрын

WHAT IS THIS TYPE OF MUSIC CALLED/ WHAT IS THIS SOUNDTRACK J NEED IT IN MY LIFE

I really appreciate the perfectionism of the whole process. Thank You!

@chaytonruijsenaars3971

6 жыл бұрын

i hope so, its one of the most important things to get right, the whole world depends on ball bearings for damn near anything with moving parts

@guicho271828

4 жыл бұрын

you know those cheap fidget spinners? they don't spin for long because of cheap bearings.

Thank you folks for making this video! It's something I've always wanted to know, especially the "centerless grinding/lapping" they do to make them so perfect and mirror-like.

@izaiahjericho4530

2 жыл бұрын

Sorry to be off topic but does anybody know of a method to get back into an instagram account..? I somehow forgot the login password. I would appreciate any assistance you can give me!

@izaiahjericho4530

2 жыл бұрын

@Skyler Axl Thanks for your reply. I found the site on google and I'm trying it out now. Looks like it's gonna take quite some time so I will reply here later with my results.

@izaiahjericho4530

2 жыл бұрын

@Skyler Axl It worked and I now got access to my account again. I am so happy! Thanks so much you saved my account!

@skyleraxl6704

2 жыл бұрын

@Izaiah Jericho You are welcome :)

”Hard, strong, steel balls are required.” Ain’t that true about life.

@cinegraphics

3 жыл бұрын

This is why I clicked on the headline. When I saw the thumb and the title, I said to myself: "There's gonna be some funny comments there"

@herwighuener3256

3 жыл бұрын

@@cinegraphics There are things in life which cannot be resisted. And after all, what ist the internet good for?

@cinegraphics

3 жыл бұрын

@@herwighuener3256 well, there are many uses of internet. For example, serious admirers of cinematography may visit certain video sites. I can't post a link because YT bans all the links to pron sites. Even the well established ones.

@drpoundsign

3 жыл бұрын

"WE got the hardest balls of them All!" I would have NO fear of Chuck Norris if I had a pair of those.

@paul_warner

2 жыл бұрын

Don't I know it brother

I think factory tours are fascinating. The footage and graphics here are very informative. Thank you!

Great video !!! No talking , to the point, great pics. Hope you people are making more educational vids; you got it together.

@insanecaine

5 жыл бұрын

Yeah, this was definitely made by the Japanese. I like these kinds better too.

@dineshb3032

4 жыл бұрын

super

This is a very good video. The full speed and then slo-mo to stills is very easy to follow. I always wondered how they made those critters!

6:54 "Hard, strong steel balls are required", here's a life lesson.

@Tibor0803

3 жыл бұрын

Technology > that someone who kick you in the balls

@judythompson479

3 жыл бұрын

Testicle buster

@mikowave7115

3 жыл бұрын

Tusk

@alexwang982

3 жыл бұрын

@@mikowave7115 Act 4

@ericfermin8347

3 жыл бұрын

Unless you are Leftists. Then the opposite is required.

We take these for granted way too much. They're everywhere making so many things possible.

You'll notice in the video here that after lapping, the balls are air-dropped on to one another. I was told that Timken does NOT air drop their balls after lapping because the impact between the very hard surfaces damages them, causing microscopic dents. Consequently, Timken drops them into an oil bath so the impact with other balls is kept to a minimum.

This is a great video. It's explains the process perfectly and it's very well made.

@philgibson8519

4 жыл бұрын

I have often wondered how this is done ,nothing to what i thought how it may be done. Brilliant stuff ,hope you have more brilliant stuff in store.

It's amazing how people came together to design and manufacture these machines to make the final product. I thank you and my bicycle thanks you.

A channel like this could've saved both me and my dad a lot of headache. Lol, I was a curious child, with so many questions...so many questions and I won't even get into my 'taking things apart' phase. Again, so many questions. Thanks for posting.

Very well done, some quirkiness, charming. Now I can make my own ball bearings.

I guess the people who downvoted were thinking "the making of steel balls" was going to tell them something other than about the making of steel balls.

@s.sestric9929

3 жыл бұрын

Some people are born with them, some people have to make them.

@chubbysumo2230

3 жыл бұрын

I mean, I thought it might be the making of Duke Nukem, but that would probably be on ph, not here.

@jojolafrite90

3 жыл бұрын

Makes sense.

@moh19931000

3 жыл бұрын

It's not that, the video is still easily understandable in 2x speed, the graphics and video quality is low, the music is dumb and it explains the dumb, obvious machines but not the complicated ones like "the ultrasonic waves used for cleaning debris" or it ignores the machine that cuts the rods inthe beginning but instead explains how rods ars lubricated🤦 It's still a great video that does what it's promised in the title but it could do it way better it seems like a 12 year old made the video.

@NotArles

3 жыл бұрын

I watch this to know how am i gonna making steel ball like gyro has in jojo part 7 steel ball run

Excellent and comprehensible. The slow-motion and graphics are a great help. Nicely done!

Back in the eighties and nineties, I worked as a machine setter/operator, for an engineering company called Sileby Engineering. We used similar cold-forming machines made by a company called Malmedie. We made valve spring retainers and sump plugs for the automotive industry. This is a trip down memory lane to see these machines working.

Finally, an English version!

Fascinating and something I’ve wanted to know for an age. Amazing how such a small and innocuous thing, that most of us never see, makes the world go round and why it was such an important factory target to put out of action during WWII. Without them nothing would work!!!!

@raymondo162

5 жыл бұрын

Amazing how such a small and innocuous thing, that most of us never see, makes the world go round …………………. what? the Earth turns on bearings? well i'll be danged - two things ah dun lurned today

@Cirocoleman

5 жыл бұрын

@@raymondo162 Yes, now you know!! The world is a giant bearing in the stellar mechanism of the Universe!!!!!

@shananagans5

5 жыл бұрын

No doubt. You can't fight a World War without balls of steel. Any machine shop was a big target in WWII but bearings are specialized. One shop can't just take over where another left off. Any machine shop can make an axle shaft etc with standard machine tools but highly specialized factories can't just shift their work to another shop. That made bearing factories and other highly specialized manufacturing plants particularly important targets.

@pineapplepenumbra

4 жыл бұрын

@@apollomoonlandings I take your point, and appreciate that there are other reasons to distrust a country, but those alive in Switzerland today cannot be blamed for the policies during WWII.

@agtronic

4 жыл бұрын

Funny you mention this, every single time I've come across a ball bearing in my 20 years as a mechanic, I've wondered how the balls were made. I usually have a good sense of how things are made, but I couldn't ever really imagine this.

These marvels of precision and mass production make our world possible. Thank you for showing me how they are made 👍👍👍

This is actually extremely complicated engineering. Engineers never get the credit they deserve

That music wasn't added, it's actually playing in the factory.

@sa12111

5 жыл бұрын

LMAO. As a teen, I worked at a restaurant which repetitively played the most horrendously awful muzak, with the speaker directly above my work area. Having lost my sanity over it, I proceeded to stab the speaker to death through the grill with a long wire

@pineapplepenumbra

4 жыл бұрын

@@sa12111 That reminds me of an episode of Superstore, where a character called Garrett was driven mad by the same song over and over.

@paulwyleciol3459

4 жыл бұрын

@@sa12111 finaly killed the speaker? ;-) well done!

@haraldpettersen3649

4 жыл бұрын

@@sa12111 - Good job, I've been subjected to "music torture" in the workplace myself.

@levirobinson8401

4 жыл бұрын

It reminds me of old school Nintendo music lol. Especially ice levels

I was involved in making tooling for ball bearings years ago. One of thousands of jobs our little header die shop did. The dies with the half spheres have carbide inserts that are pressed under high pressure in the die block. As these inserts wear they can be recut and ground to be used over again. The working surfaces are lapped and ground to a mirror like finish. The grinder used 2 different grits of wheels to get to the finish required on just the face of the die. I used 12" diamond wheels on the surface grinder. It was quite an involved process to make the tooling and the more precise the tooling the less work was needed for the secondary processes (grinding and lapping). It would be fun to see the processes used to make the tooling ....just another job at our shop but most have no idea what it takes to do it.

@xltoth

4 жыл бұрын

Very interesting. I always thought t h e were nickle then chrome plated for the shiny finish and surface hardness.

@HighGear7445

4 жыл бұрын

@@xltoth I'm referring to the working surfaces of the Dies.

@dannichols6261

Жыл бұрын

@@HighGear7445 So, how to make the tool that's used to make a tool that's used to make another tool that's used...

@HighGear7445

Жыл бұрын

@@dannichols6261 All figured out by man using materials in nature and then building upon the knowledge to make more efficient tools Then eventually using the more efficient tools to help him build machines that help him be more efficient.and so on.

That was great, thankyou. I've always wondered how they are made so perfectly. Excellent video.

Love the Soundtrack. ....Great Production....mixing and mastering....Kudos.

Love this machinery it is amazing considering the number of material balls in many materials the world utilizes each day. We just love to watch and learn all of these great maker techniques. Thank you for sharing this. Lance & Patrick.

I WANTED TO KNOW THIS PROCESS SINCE MANY, MANY YEARS AGO. FABULOUS. MANY, MANY THANKS.

@cholesterol6703

4 жыл бұрын

YOU'RE WELCOME. NOW STOP YELLING.

Fascinating and entertaining. Additionally, never have I seen a video with so many unintentional double entendres! 😂

Thank you for the very educational video. I'm glad KZread put it in my recommended list. Beautiful use of technology to make an essential component of our modern society.

Amazing how much work goes into making a simple ball. Which itself is just a small component of even larger, more complicated machines. Human ingenuity is incredible.

@heinz490

6 жыл бұрын

im a mec and didnt know that a bearing was this compli to make

@msjohncox

5 жыл бұрын

Not only that, but they can crank out thousands of them every minute with a high degree of consistency!

@Tax2Me

5 жыл бұрын

Martin Johncox think about the down time of the tooling. If the lapsing, deburring or any other tool fails yo achieve its scope due to wear, imagine the cost that translates to the 8mm ball

this series is so facinating. I am learning so much about the world and how products i use are actually made. Gives me a better understanding and respect for them Would of loved it if they showed us things like this in elementary school. A different product each day. So by 6th we had a basic understanding of how hundreds of thousands of products are produced. To help us better understand are world and store bought items. Bet a lot of kids would find a facination for something they are interested in far earlier on and as such be able to learn more on it at an earlier age and give them a leg up on their future knowing what they love before they go into the work force.

This is something I wondered about many, many times and now I know. Finally, a very good teaching video on youtube.

It's midnight on a Saturday night and I just watched a 14 minute video on the making of ball bearings. Yup.

@heimlichmud4291

3 жыл бұрын

It's 4 am and I just watched it... Yup.

@peterallman8474

3 жыл бұрын

Congratulations on getting to the end. You must have stamina, I chickened out halfway through.

@rb032682

3 жыл бұрын

@wicked - lol. 5:49 AM in Los Angeles. Which means I may finally have to go to bed. 😵🥴😷 Good thing ball bearings, although interesting, don't get me too riled up. They're a little like counting sheep to fall asleep. lol

@foolonahill9096

3 жыл бұрын

Finally your life makes sense.

@peterhychan5293

3 жыл бұрын

Peter Allman P.

Thanks, the high quality video and animation. Really helped it make sense to me. Look forward to seeing more of your videos.

1:49 "Steel balls are made from wire rod called 'steel'" :D You have to love Japanese to English translation bloopers.

@GO-ts1nu

3 жыл бұрын

Meatballs are made from foodstuff called 'meat'

@generalralph6291

3 жыл бұрын

I’m sure they have all different words for steel, but it all gets translated to “steel” in American.

@stanleysiele8056

3 жыл бұрын

@@GO-ts1nu What about blue balls?

@GO-ts1nu

3 жыл бұрын

@@stanleysiele8056 I don't know what the balls are made from but they are made with weired rod

@stanleysiele8056

3 жыл бұрын

​@@GO-ts1nu LMAO what??? nvm... I'll assume you mean what I think you mean.

They are SOOOOOOOO cute! It's nice to see how they are made!

Rod, lubricant, balls, heading, flashing, grinding, lapping.. The subtitles are inuendo treasure lmao

@M3rVsT4H

3 жыл бұрын

Just checking my notes here.. Lube the rod, give it a squeeze.. Flash your raw balls. Get them good and hot and grind them till smooth. Lapp balls for a bright shine. Then wash for presentation, because nobody wants dirty, oily balls.

@chadowens8565

3 жыл бұрын

Always wash your balls before inspection

@pablowentscobar

3 жыл бұрын

*Strong hard balls are required*

@cinegraphics

3 жыл бұрын

Seems that demand for hard steel balls is higher than ever...

Thanks for posting. I always have been curious about how they were made.

@anyangforgingpresscompany

3 жыл бұрын

Hey, my friend, hope I'm not bothering you, just want to share you another way to make big size of steel ball, hope you will like it, would you like to check it? kzread.info/dash/bejne/fXipvJWrY5nTc7Q.html

Thank you! Learned something new.

interesting..and amazing what goes into the production of these. The chemistry of heating and cooling in oil to make the molecules more uniform and rigid was interesting

@2c718281828459045235

Жыл бұрын

Although whole material is impressive, the explanation of heat treatment is misleading . Here is better explanation kzread.info/dash/bejne/aJ6FlttpfK6Xm7w.html

So satisfying to watch the balls of steel go from slices of cable to shiny little perfect spheres. Thanks jstsciencechannel, nice video

"They are called 'raw balls'" Ah yes, bringing back memories of my late teens...

@Starwithnonname

3 жыл бұрын

we call them "blue balls" in Australia.

@Rodewerksahed

3 жыл бұрын

@@Starwithnonname Reminds me of my vasectomy many years ago...

@paulbrimble8204

3 жыл бұрын

Flashing them is the answer apparently

@Catubrannos

3 жыл бұрын

@@paulbrimble8204 They even have a machine for that. Imagine the guy who designed it: what are you working on now dear? I'm designing a machine that lets you flash balls. Doesn't the zipper already exist for that?

@rb032682

3 жыл бұрын

@Dok Nomis - LOL!

AWESOME DEMONSTRATION OF MANUFACTURING ; BRAVO ! 💥🔥😬🌈

Arigato, Gyro..

@barito_o1662

2 жыл бұрын

Teach me spin plewse

@ernstengels9509

Жыл бұрын

@@barito_o1662😊

Something so small, is so important. It's very precise! Makes our world go round! Fascinating!!

The marble machine X is looking great Martin, keep up the good work.

Fantastic! Learned something new today. Never thought about how the balls are made before much. thanks

I literally haven't watched the video and just came here straight for the comments when I saw the Tittle of the video. Gold. Carry on everyone.

The most informative steel ball manufacturing video I've seen yet.

Brilliant music.

This is a very interesting video for me as the factory in Japan used to be my customer and we sold the NATIONAL MACHINERY Ball Headers plus the monitoring equipment there. I have spent quite some time there about 30 years ago.

So interesting, thank you. I hope to see more translated videos in the future for more people to enjoy. While I would love to learn Japanese, I don't have the time.

I hope there will be more English videos like this. Great job!

In this video I learned that you have to have hard, and shiny balls that are almost perfectly spherical to get through the pressures of life.

@HyborianAge

7 жыл бұрын

My balls are polished but not perfectly spherical.

@choonkiongsoh4842

7 жыл бұрын

Paul Frederick q

@msjohncox

5 жыл бұрын

And if they're large enough, all you need is two.

@jallabff93

5 жыл бұрын

@@cap10h Probably because you fuck a lot.

@derhalbvollehalbgelehrte4515

5 жыл бұрын

It works ! After watching that video my balls was of steel too. :D

great video.... love the 80's "corporate video" synth music.

@crashstitches79

6 жыл бұрын

Reminds me of the theme music of Pilotwings on SNES.

@benmcdonnell4167

5 жыл бұрын

Must be some knd of library music, but very good, would like to know who played and composed it

@jasuni554

5 жыл бұрын

Same. You can tell its Japanese.

@yannisgk

5 жыл бұрын

@@crashstitches79 or Pilotwings on 3DS i supppose?

@andyherbert2304

4 жыл бұрын

Bangers

The making of ball bearings. Something that everyone single one of us takes for granted. Who knew that there are so many fascinating steps involved into the making of something so basic, that our modern lives would be so much harder, if not down-right impossible without these little marvels.

This video was perfect, loved it!

I always wondered how - thank you for sharing!

Lovely Japanese neo-industrial smooth synth pop-jazz or whatever it is. Also the content is great!

Deus Abençoe os inventores dessas máquinas maravilhosas. O que seria do mundo se não tivesse inventado os rolamentos?

Excellent video. Thoroughly understood the various steps in Manufacturing the Steel Balls, Thanks for the efforts

Well that kept me riveted to watching to the end. Very interesting I must say.

@BedWords_

3 жыл бұрын

i think this one will keep you riveted too! kzread.info/dash/bejne/dKCtybiCppCuddI.html

@alexwang982

3 жыл бұрын

Haha riveted

Informative and full of innuendo! The scientist and the child in me have been well entertained :D

@rimckd825

4 жыл бұрын

metal can be so organic!

@Penguin_of_Death

3 жыл бұрын

@April Shadows what on earth are you doing with a scientist and a child in you?

This was fascinating. I'd love to see more of these in English.

I've often wondered how this was done. Thank you for posting.

A key element in the progression of precision in manufacturing has been the ball bearing.

@JimHeil

2 жыл бұрын

Indeed! Check out Simon Winchester’s book “The Perfectionists: How Precision Engineers Created the Modern World” for an amazing trip on this very topic.

@jarekferenc1149

Жыл бұрын

Precision? Oh, no! These machines produce the balls that are accurate (within tolerance limits), too small and too big. Only the good ones are sold, the rest is separated out and killed (this is the meaning for scrapping).

Great video of everyday things we most often take for granted to our detriment. Next time i look at my balls, i will do so with ever so much more appreciation!

@hellboy8677able

8 жыл бұрын

lol

@harveywind2930

7 жыл бұрын

Idiotic zings and zaps throughout the video are juvenile and distracting! Why is there such passion for adding this nonsense to videos, sports productions, and so many other presentations? It's an example of runaway sound pollution, and you're constantly thinking that one of your cursed 'devices' is alerting you to yet another event.. It even ruins radio shows. Enough already! Give the constant alerts and warnings a rest, can't we? How about some good old golden silence?

@MaoRuiqi

7 жыл бұрын

The sweet sounds of a genuine compliment suddenly breaks the silence; then, stillness evoked.

@user-uv1ee1ib7f

7 жыл бұрын

TANCHIN can supply special bearings of all types including those with integral shafts that help reduce the tolerance buildup of mating components. pls send EMAIL :sales@hktanchin.com for any inquiry

@kennethslade8468

6 жыл бұрын

harvey wind, could not agree more.

One rare video with a nice music . Everything is fine. Wonderful !

Best video on this process I've ever seen ....thanks

Very good production value!

Daam, imagine being that quality control lady....? Staring at little steel balls all day long can probably drive you nutso!

@possumcode

3 жыл бұрын

probably she doesn't do that all the day

@richfuller

3 жыл бұрын

Probably has a knack for the the ones that haven't dropped all the way.

@hshs5756

3 жыл бұрын

@leonardimas1 I thought they were Japanese -- they still make great stuff. The woman doing the visual inspection and the guy doing the packing look Japanese, too. Chinese ball bearings aren't worth the steel they're made from.

@hshs5756

3 жыл бұрын

@leonardimas1 I've been to Japan and China (Hong Kong) and these workers look Japanese. The average Westerner may have difficulty telling the difference, but I can.

@jpdavie4338

3 жыл бұрын

@leonardimas1 I've never learned a second language, but I can tell the difference between itialian and french people as well as words, written and spoken, and I can do the same with Chinese and Japanese.

Thanks for a very interesting vid! There is much-more to this process than I realized.

Great video on a very common much used and needed object; thanks!

How interesting. I always wondered how this balls are made and how resistent they are: 35 tons! Incredible!

@ManojKumar-cg8bb

3 жыл бұрын

Ms. Mandle. 0091958709735432100. What.

Imagine opening that box at the end upside down or something with that unsealed folded bag... That would make a long day at the shop

@paddlesaddlelad1881

3 жыл бұрын

magnet

@LetoZeth

3 жыл бұрын

Imagine opening a box upside down.

@wernerhiemer406

3 жыл бұрын

@@paddlesaddlelad1881 Sorry they are made of stainless steel. At least the 2 mm balls I use to clean my insolated drinking bottle. I try my best to fill them into flask by a measuring bottle with spout but sometimes they happen to jump over and end on the kitchen floor. My best look is them not getting into sink. Yes there are funnels but most of them are used elsewere even at recovering them from vacuum dust besides other missfortunes of jumping small parts found later.

Omg wow this is how steel balls are made. Thank you so much for sharing this wonderful video🙏❤

Well done 👏, you did a great job in relaying the information with details with info graphic. 👏

I must be a huge nerd, but I dont care in the least. Enjoyed this video. Keep them coming!

"Thank you, Gyro..."

@thegreatesthigh1788

7 жыл бұрын

IS THAT A JOJO REFERENCE???!?!?!?

@Mr407etr

6 жыл бұрын

Johnny Joestar i

@justanenglishcommentpassin644

5 жыл бұрын

Finally found Steel Ball reference

@Wasting_Time00

4 жыл бұрын

@@justanenglishcommentpassin644 SBR= Steel Ball Reference

@judythompson479

3 жыл бұрын

spin

Very, very interesting. Thanks a lot for the video. Colin UK 🇬🇧

Marvelous! Magnífico! Muito interessante!

Machine person here i liked the vid good job!

I once played Quake while having an audio CD with classical music (Bach, to be specific) in the CD-ROM drive. I was amazed at how well it fit the game.

I guess I lead a sad life as I’ve always wondered how these are made. Thanks for taking the time and effort to show me.

Amazing. And we all took them for granted.

Great video!

I was expecting some japanese grandpa making every ball by hand

@DanHaiduc

3 жыл бұрын

Or a Swiss watchmaker, eh? :D

@alwaysopen7970

3 жыл бұрын

Pre WWII.

The Making of Steel Balls should really be its own episodic TV series. This was only enough steel ball making to whet my appetite.

Excellent proces ball production, thank you and congratulations 😀.

This is one of those VERY Satisfying "How Its' Made" videos. I love it!!! Permanently LIked and Subbed!

this was better than HOW IT'S MADE , there were good graphics added to this video to explain the processes going on

@sleazoid99

5 жыл бұрын

IMO the video took a lot longer than necessary. I also think narration is better than captions.

Wow, amazing, it's a precision work in accuracy...👍👍👍

Great video---educational and very entertaining as well. Thank you and happy rolling.