The Leather Element: Confidence with Letter Stamps

Тәжірибелік нұсқаулар және стиль

Letter stamps can be a bit intimidating since it can be difficult keeping them in a straight line. In today's video, Chuck shows a few tips and tricks he uses to keep letters in line on your project. If you've got any tips you use, make sure to share them with everyone in the comments!
3/4" Letter stamps: www.weaverleathersupply.com/p...
1/4" Letter Stamps: www.weaverleathersupply.com/p...
1/8" Letter Stamps: www.weaverleathersupply.com/p...
#TLE #TheLeatherElement

Пікірлер: 84

  • @jessicapaige146
    @jessicapaige1468 ай бұрын

    Your enthusiasm is contagious! I'm just starting with leather stamping, this was super helpful. Thank you!

  • @thedavidfield1
    @thedavidfield13 жыл бұрын

    Great pointers Chuck! Thanks!

  • @thecomposer3279
    @thecomposer32793 жыл бұрын

    Thank you Chuck! Your videos are the only ones I watch for tips, tricks and how to, as I am new to leather crafting.

  • @jasonchapman9116
    @jasonchapman91162 жыл бұрын

    Fantastic. Looking back over your old postings and I'll always find just the advice I'm looking for. Another really useful video, thanks Chuck.👍

  • @tedhobgood
    @tedhobgood3 жыл бұрын

    That was really helpful, thanks! And I had never heard of or thought of that filigree trick at the end. That has possibilities...

  • @CorsoWorkshop
    @CorsoWorkshop3 жыл бұрын

    It is UNCANNY! I just received my letter-stamping set TODAY! :D just what I need! Thanks Chuck and Weaver :)

  • @TheSuccessfulEmerald
    @TheSuccessfulEmerald Жыл бұрын

    Another excellent video. You just sold some stamps, Chuck!

  • @simplyorange8553
    @simplyorange85533 жыл бұрын

    Chuck is the GOAT

  • @stanmcconnell9474
    @stanmcconnell94743 жыл бұрын

    Chuck, Love your videos ! Please keep them coming. Suggestion - Try beveling around the letters and then using a background tool. Totally changes the look.

  • @dannybeggs2358
    @dannybeggs23583 жыл бұрын

    Thank You, I needed this. Been having trouble getting consistency. I have been using paper tape as my straight edge/guide across the leather. Fixing a steel ruler or something similar to what you have used to butt up to will help a lot.

  • @ScottRedstone
    @ScottRedstone3 жыл бұрын

    Another great example of a teaching video. I have a laser for doing lettering but you may have given me the itch to try letter stamps. Just used your dye, balm and tragacanth sealer. My first piece came out really nicely.

  • @notwrkn2mch
    @notwrkn2mch3 жыл бұрын

    Being fairly new to Leathercraft this one really helped me out

  • @JimRodgers
    @JimRodgers3 жыл бұрын

    Great tips and suggestions! I've struggled with leather stamps (the letters and numbers especially) and you've given me some excellent options. First thing I need to do is ditch the inferior tools I have been trying to use and grab some Weaver stamps. ;)

  • @jamesmedrano5807
    @jamesmedrano58073 жыл бұрын

    Great video and very informative. Great CHUCK, now I'm going to be checking all my letter stamps and filing them down this weekend. Oh Well.......

  • @donlapham1265
    @donlapham12653 жыл бұрын

    Thanks for this! I tried doing letter stamps and had one crooked. Will definitely try the bar stock!

  • @dperisty1
    @dperisty13 жыл бұрын

    Wow I wish I seen this and how great the Weaver stamp set is BEFORE I bought 2 sets from T---Y.

  • @ThePersistentAutistic
    @ThePersistentAutistic3 жыл бұрын

    Your videos are so helpful! I have been making leather journals for a while but am now experimenting with new techniques and ideas. After struggling with snaps and finally mastering them after watching your clear, to the point video, I had to subscribe. Glad I did. Thanks for sharing your knowledge!

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    3 жыл бұрын

    Thank you, Samantha!

  • @juliangonzales2916
    @juliangonzales29163 жыл бұрын

    Exelente explicación saludos👍👍👍

  • @ArcticArsenal
    @ArcticArsenal3 жыл бұрын

    Thanks, Chuck! I bought a cheap set like that, trying to save money. Just before Christmas, I had to pitch a belt I was making into the bin because the letters were all wonky. It was a waste of time and money. I could try to sand the edges, but that would be a waste of time too. I'll be ordering some good letter stamps soon.

  • @christoherbarnes9276
    @christoherbarnes92763 жыл бұрын

    My wife has a scan and cut and we have found it to be incredibly helpful. We can stamp the lettering on a piece of paper, scan them in cut them out and lay it on the belt as that is all we have used them for so far and get a perfect line everytime . It's been very useful as we are only about six months into leather working.

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    3 жыл бұрын

    Thanks for sharing!

  • @lilifalconzer354
    @lilifalconzer3543 жыл бұрын

    Thanks! A lot!

  • @jimathey6153
    @jimathey61533 жыл бұрын

    Hi Chuck, OLD LEATHER SMITH here, I use a 3 corner ruler, remember those? When I got started a looooong time ago I made some buckshot weights that is what I use 2 hold the ruler from moving, just an idea, I also like the BIGGER and HEAVIER stamp driver 4 me it works great, well enough said, GOD'S BLESSINGS ✝️⚾🙃

  • @danielspencer582
    @danielspencer5823 жыл бұрын

    I checked my animal stamps a friend got me for Christmas and saw how much play there was between the two parts.😬 But now I know what to look for with any sets I get in the future.

  • @joeymitchell8537
    @joeymitchell85373 жыл бұрын

    Chuck thanks for all do I would like to see how to set up a pattern for a pocket organizer

  • @michaelpcooksey5096
    @michaelpcooksey50963 жыл бұрын

    Nice points to be aware of. Thank you. Any idea how to stabilize leather? Flat edge no problem with another piece of bar stock, curved... open for suggestions.

  • @harnesshouse
    @harnesshouse3 жыл бұрын

    Even that tiny arrow (or letter) to indicate the orientation of the stamp can be missed. I take a Sharpie and mark that side of the stamps so that I can immediately see the correct orientation without having to use a magnifying glass.

  • @dannyhackworth8575
    @dannyhackworth85753 жыл бұрын

    Hey Chuck how about a Leather Element about fixing or repairing mistakes. Suck a cut scare on the project, not cutting the leather square, etc.

  • @armag60
    @armag603 жыл бұрын

    thanks for the tutorial, but if you have to use a double, for example CC how do you keep a constant distance?

  • @OrinLePirate
    @OrinLePirate3 жыл бұрын

    Hey Chuck I was wondering how to avoid haveing creaky and/or squeaky leather, and what are some things I can do to fix this problem once it has occurred?

  • @rockinnp
    @rockinnp Жыл бұрын

    Are there tips on managing spacing for curved stamping? Such as a trophy saddle where they want stamping on the fenders?

  • @ArcticFlies56
    @ArcticFlies562 жыл бұрын

    Chuck what size mallet are you using? It looks huge!

  • @lauraweiss7875
    @lauraweiss78753 жыл бұрын

    I use a hand press for my stamps. Any tips for lining up letters with one of those?

  • @valsheehan2011
    @valsheehan2011 Жыл бұрын

    Loved your video!! Could you please inform me if this letter stamp set would work on faux leather? I want to stamp on the right side of the fabric(coloured side). Your stamp set seems perfect! Loved the use of ruler and tape.

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    Жыл бұрын

    You can certainly try it. But usually faux leather cannot be stamped or at least will not hold a stamp very well.

  • @michaelpcooksey5096
    @michaelpcooksey50963 жыл бұрын

    CHUCK might be nice to center the U then go to both sides. Also, Nubs on stamps may be harder to see for us with grey hair but a small touch with permanent black marker will fix it quick.

  • @mikemcilroy3800
    @mikemcilroy38003 жыл бұрын

    I know right where you are coming from!! The tandy tools are cheap junk and way over prices for what you get. I had to go through all of my stamps and sand the edges clean, it took me hours to get them where they would line up the way they are supposed to.

  • @Woodys_Workshop
    @Woodys_Workshop2 жыл бұрын

    I find myself using letters and numbers mostly on an arc. I would suggest a Leather Element on how to do this correctly. I never get it to look right no how much practice leather I use up trying.

  • @Astrogazzr
    @Astrogazzr3 жыл бұрын

    How do you space the stamps if I want the letters to be closer together that just putting each letter stamp next to each other?

  • @ozzy7457
    @ozzy74573 жыл бұрын

    Hey Chuck Just wondering if you could help me with a problem. I recently purchased a whole side of calf veg tan. I have purchased it before and found it good for what I use it for. Unfortunately this piece is very spongy, I'm having trouble even beveling the edges, burnishing is quite difficult and I'm not getting a good enough finnish. Tooling I think is a complete write off, Any suggestions would be much appreciated

  • @artstrutzenberg7197
    @artstrutzenberg71973 жыл бұрын

    the letter stamps, you also mentioned there is an arrow that can be used to maintain the proper orientation. Would it not also make sense to also drop a dot of nail polish at the bottom (or top) of each stamp? (Stronger visual cue)

  • @jonathanneil9660

    @jonathanneil9660

    3 жыл бұрын

    A trick: you can watch series at flixzone. I've been using them for watching loads of movies these days.

  • @caidenkenneth6857

    @caidenkenneth6857

    3 жыл бұрын

    @Jonathan Neil Definitely, I have been watching on flixzone for since november myself :)

  • @margodawson4671
    @margodawson46713 жыл бұрын

    I need to make a holster for my round knife. I keep it so sharp it wants to cut through the leather pad I keep it in. Can you help, Darrell

  • @thequietshodan
    @thequietshodan3 жыл бұрын

    Hi I just watched you water based vs pro dye. I mostly use water based dye (eco-flo) never used pro or oil based. I noticed that my water based dye makes my leather stiff. But oil and pro dye(don't know the differencebetween the two) from what I noticed the leather is still pretty soft and floppy. Why is that? If you or someone can let me know why it does that. Why the consistency in the leather changes, thank you. Its just for my own knowledge and I'm thinking of switching over to try oil based.

  • @dotmoriarty4354
    @dotmoriarty43543 жыл бұрын

    I'm new to leather...is VEGTAN the only leather you can wetmold? Thanks Dottie! From Tennessee....

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    3 жыл бұрын

    Hi Dottie! Yes, veg tan is going to be the only leather that can be wet molded. Hope you're enjoying leathercrafting!

  • @jimathey6153
    @jimathey61533 жыл бұрын

    OLD LEATHER SMITH here, I forget something, on all my stamp sets I marked the proper side with a ORANGE marker so this OLD MAN could C it, NO MISTAKES ANYMORE, GOD'S BLESSINGS ✝️⚾🙃

  • @jarrettsroka4469
    @jarrettsroka44693 жыл бұрын

    I live in Canada and our store is tandy leather. What is your opinion on them

  • @lukesteverything627
    @lukesteverything6273 жыл бұрын

    Thanks Chuck but the problem I have is that I think the letters are too far apart. When something like a 'W' comes after (for example) an 'A' the gap looks even bigger. I think the term here is 'Kerning'. I've never found a successful way of getting the spacing right even though I've filed away the edges as much as possible. Any ideas anyone?

  • @lukesteverything627

    @lukesteverything627

    3 жыл бұрын

    @@maddawgnoll Yep, there's money to be made coming up with a system where each stamp has 3 (for example) registration points so that the user can easily choose the spacing.

  • @lukesteverything627

    @lukesteverything627

    3 жыл бұрын

    @Unmutual I guess if the backing could be transparent it would be easy. I tried the ruler thing but trust me it's almost impossible.

  • @lukesteverything627

    @lukesteverything627

    3 жыл бұрын

    I'm words without action. Maybe Weaver will do it and send me a free set or 2. Another idea I mentioned to somebody else is to put small registration marks on the stamp so you would know how to shorten the distance top and bottom. That said, maybe I'll get some leather tags made up and rivet them on.

  • @grimtt

    @grimtt

    3 жыл бұрын

    @@maddawgnoll someone else mentioned 3D printing... maybe combine that with transparent backing?

  • @lcatt236
    @lcatt236 Жыл бұрын

    What do you line the bar stock with?

  • @stimpymcwhisky8129
    @stimpymcwhisky8129 Жыл бұрын

    The filigree cutbelt video. Where is that?

  • @k_sey.9370
    @k_sey.93703 жыл бұрын

    How would you stamp around the letter stamp? Say we were adding a basket weave or background stamp around the letters?

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    3 жыл бұрын

    You can either fade the stamps or create an oval or round shape around the letters and use a camouflage tool. See if this video helps! kzread.info/dash/bejne/eHtnxtyRfa6TpKg.html

  • @outfitr9703
    @outfitr97033 жыл бұрын

    The "K" looks quite a bit lower than the rest of the letters even though it was placed on the straight edge. That tells me that the Weaver letter set may not be that much better. If the actual letters are not perfectly oriented within the stamp block then the straight edge doesn't do much good. I've learned to lightly tap the stamp and check its orientation to see if it needs to be moved a little before smacking it and that doesn't always work perfectly either. I was hoping that the weaver set was indeed a precision stamp set..if so I would gladly purchase . Could you do a little more work with the straightedge to verify the letter placement?

  • @Quatrawinner

    @Quatrawinner

    3 жыл бұрын

    From what i can see, he started going off the rail at the second C. So I'm willing to bet that the bar stock wasn't as straight as chuck thinks it is. I work in a hardware store and i can tell you this, Bar stock is great for adding rigidity to a project; but absolutely crap at being completely straight. If i was going to do something like this, i'd be using a ruler with mm markings from the edge of my piece to get an exact straight line set up and verify after each punch. Sure it's more time consuming, but time in means quality work.

  • @MattWeber

    @MattWeber

    3 жыл бұрын

    The bar shifted, the problem with using a straight edge is that if you dont hit the stamp dead nuts straight down, and instead slightly toward the straight edge, you can shift it back ~1-2mm without even noticing because it happens so fast during the strike.

  • @jimathey6153

    @jimathey6153

    3 жыл бұрын

    @@maddawgnoll OLD LEATHER SMITH here, very well thought out answer, nice 2 C, Question, unpack UR stuff yet? GOD'S BLESSINGS ✝️⚾🙃

  • @jimathey6153

    @jimathey6153

    3 жыл бұрын

    @@maddawgnoll OLD LEATHER SMITH here, it is my signature stitch, what I like about it is I even lace with it, if you think it looks good with thread try with lace, I make hand bags 4 charity auctions then the stitch really shows off, GOD'S BLESSINGS ✝️⚾🙃

  • @outfitr9703

    @outfitr9703

    3 жыл бұрын

    @@MattWeber I don't know, I watched video over and over and I don't see the straight edge moving at all.

  • @Augcliffe
    @Augcliffe2 жыл бұрын

    mark the top or bottom with nail polish so you know orientation :)

  • @donniehodges9857
    @donniehodges98573 жыл бұрын

    how about doing letters on a belt? thanks.

  • @dannyl.wellington4073
    @dannyl.wellington40733 жыл бұрын

    Can you soften leather before you do your project?

  • @skyehorvath9063
    @skyehorvath90633 жыл бұрын

    Hi I am new at leather and I want to make braclets i want to use veg tan leather is their I certain once leather I should get thanks

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    3 жыл бұрын

    Hi Skye! It depends a little bit on the type of bracelets you're going to be making. You can go anywhere from 3/4 oz. for smaller bracelets like wraps or mystery braids and the 4/5 oz. to 5/6 oz. for cuffs. If you're going t be tooling and stamping we would go with natural veg tan. We've got single shoulders and 12" x 24" panels if you would prefer to start with a smaller piece of leather at first. Panels: www.weaverleathersupply.com/catalog/item-detail/13100-35-12-18/hermann-oak-veg-tan-strap/pr_56565 Single Shoulders: www.weaverleathersupply.com/catalog/item-detail/11-1202ss-3-4/veg-tanned-single-shoulders/pr_62495

  • @edgarleon3673
    @edgarleon36732 жыл бұрын

    Bendiciones, buenas tardes por favor cuánto cuesta $ y en dónde las compro gracias por favor respondan ,( envíen respuesta )

  • @WeaverLeatherSupply

    @WeaverLeatherSupply

    2 жыл бұрын

    Hola. Gracias por tu comentario. Todos nuestros suministros están disponibles en weaverleathersupply.com.

  • @grimtt
    @grimtt3 жыл бұрын

    Because I’m so OCD regarding spacing, alignment, etc of my letter stamps, i just go whole hog and make them all crooked on purpose! No weights, rulers, or anything needed! 😂

  • @christoherbarnes9276

    @christoherbarnes9276

    3 жыл бұрын

    That a good idea

  • @robertdikes8285
    @robertdikes82853 жыл бұрын

    I agree with Art, but I nail polish the entire back of the letter stamp (where arrow is and up the tube of the socket) to help me better see the correct orientation of the stamp face. Screwing up just one project will easily pay for a bottle of UGLY nail polish and your time. I did, five sets one evening after ruining a project!

  • @joshuapoche5137
    @joshuapoche51373 жыл бұрын

    I did this the other day putting a name on a gun sling and there was something on the back of my ruler and ruined the whole project. Just my luck

  • @janetgambles7475
    @janetgambles74752 жыл бұрын

    You could refine your set up by using a metal ruler instead of the barstock to help with consistent spacings. Or add marks/ paper tape with inches/cm to the bar stock. Or put a grid on your underneath surface and move your bar/ ruler so it lines up nicely at both sides

  • @zachgullerman3183
    @zachgullerman31833 жыл бұрын

    You can also have custom plastic stamps 3D printed for special projects without breaking the bank whether you order them or get into 3D printing yourself!

  • @Anarchy-Is-Liberty
    @Anarchy-Is-Liberty2 жыл бұрын

    The K looks low to me.

  • @lukebeckwith4148
    @lukebeckwith41483 жыл бұрын

  • @502deth
    @502deth3 жыл бұрын

    whoa... weaver leather SUPPLY?!?!? what happened there?

  • @unboostedpueeblood
    @unboostedpueeblood2 жыл бұрын

    The cheap set would be fixed by a machinist with a mill. He'd also be able to solve that sloppy wobble.

Келесі