ANGLE GRINDER WITH FREE ROLLOCK!! goo.gl/6BolsE SUPER BUY ON SANDING DISKS FOR ROLLOCK goo.gl/SIzdRv

@cameronmcpeak5183

7 жыл бұрын

Wranglerstar can you regulate how stuff is shipped? Some stuff in your store cant be shipped to Canada Eh?

@ziploc53

7 жыл бұрын

eclyons.com/index.php?main_page=product_info&cPath=14&products_id=333 Found this

@michaeldunn9765

7 жыл бұрын

Wranglerstar I watched your video about click bait and i know you're telling the truth and i know its not fare what KZread is doing. I also read all the flack you got from critics along with the support from from likeminded people such as myself. and I thought about it again later, and I wonder have you ever paying for ad space on KZread. I'm not sure if that makes any sense to you or if that's even something within your budget or if you would even be interested in doing so.

@MichaelSmith-nw9qg

7 жыл бұрын

Wranglerstar get the gray that will polish it to a mirror finish after the blue

@ivankatrump4042

7 жыл бұрын

Qualified for the Boston Marathon!?!? Way to go Mrs. W!!! Get well soon W family

I prefer atom-splitting sharp personally.

@noskcaj1665

4 жыл бұрын

ah yes a nuclear reaction with an axe

@nickwetzel5496

3 жыл бұрын

Phhhh Atom splitting. No no. Electron splitting

@quincyharris3068

3 жыл бұрын

@@nickwetzel5496 I read that as "election splitting" XD

@TheRealTatakan

3 жыл бұрын

@@quincyharris3068 you could do that with a normal axe lol

@theamazingfreak

3 жыл бұрын

@@quincyharris3068 I am pretty sure Donald Trump would voice an opinion on that lmao.

The Bob Ross of axe sharpening

@clivefriedrich2557

5 жыл бұрын

Thumbs up for a Bob Ross mention

@alwayslive7460

5 жыл бұрын

OR MR ROGERS... BUT YOU ARE LOVED

@Fooleish

2 жыл бұрын

The axe whisperer

Thank you so much! I am a pastor in Australia and have been following you for quite some time. Once my wife herd you talking as a man of faith, she started watching. She watch this video and guess what! I have a compressor in the garage- blessings to you both.

when you abused the axe my dad walked past and said "wrangler you monster"

hey Cody have you ever tried dishwashing liquid as a cutting media on your stone. you love your stones so here's a little secret taught to me by a kangaroo shooter. Oils on a stone will clog the stone with tiny metal filings deeply imbedded into the stone. Because dishwash is both slippery smooth like oil, BUT water soluable. When you wash your stone off in water the dishwash bubbles out of the stone, bringing out the metal filings with it. it leaves the stone super clean and brand new looking. Every person I have shown this to so far has agreed and converted to dishwash liquid. It even leaves your skin feeling great. great for using in the kitchen, with all your cooking knifes. With a good clean stone, The blade will sing as you stroke it over the stone. I would love to see you do a video on this and give your thoughts.....

@ahoo5753

5 жыл бұрын

Ram2 I

@Jack_Lange

4 жыл бұрын

Fuckn roo shooters

@zacharysauson6418

4 жыл бұрын

Interesting

@groverbundy899

3 жыл бұрын

Thanks

@Handles-R-Lame

3 жыл бұрын

@@Jack_Lange those roos can be quite vicious

Your newer videos look amazing, the lighting is incredible. you can tell that the shop is a great new space you made for yourself.

@MrCamradude

7 жыл бұрын

warkon F h

I hope y'all get better. Nobody likes being sick. I'll be glad to see you get back out in the woods. Those videos are my favorite.

This was perfect! I'm lazy and I want sharp axes... Thanks for adding the ScotchBrite Roloc heads into the store. Those are a life saver. Will keep y'all in our prayers.

is not dull is simply serrated

I used the stone last night and the machete/axe sharpener. Going back and forth to sharpen both axes. I prefer your way of Hand Sharpening. I have never sharpened any axe ever. So your tips mean a lot for me. I will get a Bastard file soon. But i need the rawhide leather and also a bench clamp. You inspired me to buy my Axes. It is a tool that we all need. Thanks for making your videos Champ. 👍👌✌

Bin watching your videos for a lot of years and get lots of great ideas from WRANGLERSTAR keep up the good work

Nice video, thanks so much for sharing your methods and ideas. Thumbs UP of course!

Very satisfying video: the suspense and then the save! This is like the good old days. Glad to pray for your family. Wishing you peace and blessings.♡

14 minutes of sharpening! love it!

You guys are getting the kind of snows that we got when I was a kid growing up in Northern California. I kinda miss those days. Interesting video, Cody. It takes talent and experience to make it look so easy. Thanks. Praying for you and yours every day.

Wranglerstar please make more videos like your older ones where you test tools together or cheapest Amazon products. The gadget and tool testing videos are some of the most viewed content and the ones you have made are awesome

Roloc is a popular patented abrasive disc attachment system by 3M that uses a safety torque spiral to mount and dismount the abrasive disc to the backer pad or holder. Roloc just refers to the mechanical type of connection between the backing pad and the disc. There are over a dozen other attachment styles listed on 3M's website. (posted due to some of the comments)

Lets do this with out power tools...

Great video! Cody, you are a very good teacher. Thanks for taking the time to show us how you keep your axes so sharp.

Many thanks to The Rumpled One who Made your channel known to me many years ago. You have so many great tips that you share.

loved your King Solomon quote! SUBSCRIBED!!!!! AMEN BROTHER!!!

Congrats, you just associate axe sharpening with the dentist for me.

Full of good information! Thanks for sharing the fruits of your years of experimentation to find the best practical way to sharpen heavy cutting tools!

Nice Vid ! Thanks for the correct title .Many of us use the title to find the correct video for what we are working on .

Nice to see a title that doesn't hurt my intelligence!

@danmanfarm

7 жыл бұрын

Yep. I'm not a fish, and I dont feel good when someone is fishing.

@danmanfarm

7 жыл бұрын

More neurons you have, more sensitive you get with manipulation technics.

@chrisjones6002

7 жыл бұрын

I didn't like his clickbait titles until I watched his video about them. I still don't like them but I can understand why he's doing it. Take a look at it.

@Customsouthernarms

7 жыл бұрын

don't be so delicate.

@jsarocks

6 жыл бұрын

Intellect *

O' God, the agony in seeing the first bit of this video! lol

@defaultstate4536

7 жыл бұрын

right, so painful

@consaka1

7 жыл бұрын

I had a hard time watching that too. The only thing worse is watching kids destroy cars and engines for the fun of it.

@kf4dcy501

7 жыл бұрын

Ken Andrews I don't see it like you do. because if you do damage your edge. if you don't know how to sharpen an edge. then I feel for you. because I know how to make an edge. not just for shaving edge sharp, but to cut any material. fiber glass needs a cerated edge made from a cinder block or concrete suface. you can cut and polish cured concrete to make your own stones.

@kf4dcy501

7 жыл бұрын

Ken Andrews I don't see it like you do. because if you do damage your edge. if you don't know how to sharpen an edge. then I feel for you. because I know how to make an edge. not just for shaving edge sharp, but to cut any material. fiber glass needs a cerated edge made from a cinder block or concrete suface. you can cut and polish cured concrete to make your own stones.

@consaka1

7 жыл бұрын

kf4dcy, I think you missed the point. Some of us just have a hard time watching something being abused even if it is for a good cause.

Your new shop lighting is the bomb I can tell the organization has helped the fluidity of your videos good job

Thanks so much for the demonstration! I appreciate your videos, wisdom and experience. Blessings.

Love the content, keep it coming!

Where are you ordering your trees from? Do you have any videos about planting apple trees? That's something we plan on doing this spring. Great Video!

@brotherbeek1728

7 жыл бұрын

You might check your state Conservation Department. I live in Missouri and they sell many species for very good prices. They are seedlings, but I am able to get quite a lot for a super cheap price.

@RIBill

7 жыл бұрын

Ethan Hill Lawyer Nursery was the wholesale nursery with the best variety for the best prices. All they ever required was a minimum order size (in $). They did require that you buy bundles. If you're looking for specific cultivars of some kind of fruit tree, you would want to seek those out specifically.

@RIBill

7 жыл бұрын

Ethan Hill Lawyer Nursery was the wholesale nursery with the best variety for the best prices. All they ever required was a minimum order size (in $). They did require that you buy bundles. If you're looking for specific cultivars of some kind of fruit tree, you would want to seek those out specifically.

Hi, just ordered my grinder tool stone and grinder wheels from your store. Can't wait to give them a try on my ax. I really like watching your videos especially when you take an old tool and clean it up or an old item and restore it. Also just about anything you've done on your homestead I've watched almost all your videos and really enjoy them. I wish your family the best, and Mrs. W the best in the Boston Marathon too and God's blessing to your family.

My father was a country blacksmith, and he taught me to always sharpen using that circular motion. He used to make hunting knives out of worn-out files. I'm glad to see that art of sharpening has not been lost. Good video.

*searches for cheapest way to sharpen an axe* $70 dollars in parts and accessories and a $200 pneumatic compressor later...ITS PRACTICALLY FREEEEEEEE

@narutoisthebestevaaa

5 жыл бұрын

it says "laziest way" not cheapest buddy...

@andreahighsides7756

4 жыл бұрын

The cheapest way to sharpen is with a file. Ideally put the axe in a vice or just hold it with the head in your hand, edge up, and the handle on the ground. Then Move the axe and file against each other at your desired edge angle. It will take a long time and create lots of metal dust so eye protection is good.

"I have found a way that anybody* can sharpen the worst abused axe in a matter of minutes" *anybody who owns a pneumatic air tool compressor and buys my 60 dollar air tool.

@FT4Freedom

2 жыл бұрын

Yes. It's called the free market. Americans are consumers. It's called liberty. The alternative is slavery. His business supports your freedom.

@caseyb1346

2 жыл бұрын

@@FT4Freedom I think you could fit a few more buzzwords in there if you tried.

I love ur channel, always learn something and not just about tools, but ur life outlook. Very great!!!!

Just what I was asking for in the last video, thanks Wranglerstar!

I get these stones from MSC industrial supply. I have a drawer full of them.

Can you please do an video on hultafors axes

Nice! I have used the roloc for years, a mechanic friend introduced them to me. I use the primarily for cleaning gasket surfaces on all sorts of machinery. Thanks and Be Well Wranglerstars

Thanks Wranglerstar! Watched the video next to the wood stove with a cup of tea. Great end to the evening!

Killing the sister of the axe that almost killed my sister That is a proper clickbait title (I've seen your video about the subject and i completely agree with you, you live off of you tube so you have to follow KZread moves )

@jordanmunoz1813

7 жыл бұрын

haha good one man

@KamonPlays

7 жыл бұрын

Would have been even better if he'd used the same axe (odd, Chrome wants me to spell it as "ax") and called it "Vengeance On The Axe That Almost Killed My Sister."

@dwightehowell8179

6 жыл бұрын

Mericans spell things funny. I know cause I ire one. We talk funny two.

Would you do a video on sharpening machetes? I have to hardest time getting it right. I use a bastard file and it does ok but it dulls quickly. Am I doing it wrong or is it the blade itself?

@consaka1

7 жыл бұрын

My personal experience is that it is hard to find a good machete and by good I mean has good steel. A good machete, in my opinion, should have a slightly tapered blade and it should be tempered to be hard on the outside but a bit softer on the inside so it remains tough but not brittle. Should have a springiness to it.

@KamonPlays

7 жыл бұрын

Try keeping the bevel to an axe grind (some people call it a convex grind, but it refers to the same shape.) After you've gotten your bevel right, you're looking for an angle of 30 degrees on machetes and general purpose axes.

@67yankee1

7 жыл бұрын

G23, Try using a mill cut type flat file, taping the file every few strokes to clear the file. Never back stroke the file, as it will damage the file's teeth. Wear leather gloves when filing, leave several inches just above the handle dull and use a lanyard to secure the machete to your wrist. The machete is one of the most hazardous cutting tools to use, not only to the operator but to persons near you. Take Care!

@67yankee1

7 жыл бұрын

Ken, True, it is also called "Hollow Ground".as are most all quality knives are made. Personally I shape my axes in this shape with a 7' metal grinder which minimizes sharpening time. My profession includes an axe as a tool I carry with chainsaws. I used to do the multiple stone sharpening syndrome but for all intents and purposes as with knives I prefer a hollow ground grind and a flat file for saving time. Using stones will leave cutting edges with inefficient profiles and convex shape after time. Not saying one is better than the other but I have other things to do instead of rubbing rocks on my tools for hours.

@KamonPlays

7 жыл бұрын

Mark Harris a hollow grind is not an axe grind. a hollow grind is rounded inwards. look at a Straight razor. on cell phone right now. we'll talk more, later.

I learn so much from your helpful videos. Please keep sharing them on youtube! Thanks.

Watching you sharpen an axe is really lovely. Very relaxing!

@Arshumness

7 жыл бұрын

No sir, I'm not a squirrel

Laziest way to sharpen: Work for a week in order to afford an air compressor and grinder

@consaka1

7 жыл бұрын

Yeah those air tools are notorious for sucking down the air. with a big tank even the smallest compressor can make this tool workable for short periods. I happen to have two of those tools and a 'good" 5+cfm compressor and it is still not good enough for my use. I am constantly having to wait for that thing. It's annoying to wait and that blasted compressor is an oilless Dewalt that I swear you can hear for miles. I have collected the motor and intend to build a real compressor that is relatively quiet.

@consaka1

7 жыл бұрын

Smallest I know is a 3.5 inch unit. But that won't take the rollock or the pads.

@mildyproductive9726

7 жыл бұрын

Even after you have purchased it, you have to dig out your air grinder and find/fit it with the right attachment. Unless you have it set up that way by default because you sharpen so many axes, lol. Compared to flipping the switch on your bench grinder or belt sander, this doesn't seem very lazy nor particularly fast. I suppose if you're really in a hurry to reshape your file-molesting hatchet, you could even pick up your angle grinder. :)

@windhelmguard5295

7 жыл бұрын

you know if you are going to go out of your way to purchase machiens for sharpening an axe you might as well just get a belt sander. i mean even my tiny work sharp knife sharpening tool works fastert han this all you need to do to get it ready to go is to put the green belt on and plug it into a wall. and i don't even have the wider blade atachment for it.

@dangergirldesigns5943

5 жыл бұрын

A rotary tool with a sanding drum will do just as good a job but you need to keep the drum moving or you will have a warbly face.

Roll lock is the abrasive pad that you are using. The pneumatic tool is an angle die grinder.

@poopingandroid

7 жыл бұрын

Are you sure? This is the 2nd video that he has called the TOOL a "Roll Lock" tool. I was simply explaining to people that a "Roll Lock" is not the whole tool.

@lonewarrior1999

7 жыл бұрын

PoopingAndroid yes he is aware look at his comment where he shares the link to the tools.

@consaka1

7 жыл бұрын

I wasn't confused and I doubt he is too. Pretty obvious what the tool is and it says it on the package.

@KamonPlays

7 жыл бұрын

+PoopingAndroid Even if Cody was aware of it, himself, the information helped clear it up for me. :) I was aware of the die grinder, but wasn't sure if he was calling it a "roll lock," or if the attachment was what he was referring to.

@lq2777

5 жыл бұрын

That India stone is Norton Abrasives IB64 India AO Combination Grit Benchstone With Coarse and Fine Grits, Aluminum Oxide Abrasive, Orange/Brown Colors, Round, 4" Diameter x 1" Thick www.amazon.com/dp/B00Y95P2JG/ref=cm_sw_r_cp_api_i_Ay9NCb85SNRKA

Saw the title and figured it was going to be an angle grinder. Same principle but I like this more I think for finer work of course. My angle grinder is my go to sharpener for my commercial lawn mowing equipment.

I'm glad you are revisiting the tree planting. I've picked up in some of the videos that you lost a large percentage but I didn't hear an actual percentage till this video, and I've been wondering how they were doing.

That Stone is the Norton IB64 round combination stone, it is an aluminum oxide, that is the I in the IB64. They also have it in silicon carbide, JB64, and they have it with a finger groove in silicon carbide, JB74. The finger groove is great if you're holding the stone and sharpening something, like a mounted planer knife or shear blade. The silicon carbide is not great for sharpening something as relatively soft as an axe or pocket/kitchen knife so i'd stick to the aluminum oxide, but you should be able to get any of these for around $25 or less if you shop around so you can try it out. I use the IB64 all the time to 'stone' the table of my mills and machine vises to make sure there are no high spots and I just bought one of them a few weeks ago from my local norton dealer so they are most definitely still in production.

@PWlangford1

7 жыл бұрын

Widget Works Manufacturing Inc. Are they sold in Canada ?🇨🇦

@TheWidgetWorks

7 жыл бұрын

Thats were I am so yep!

@thebigdl1

7 жыл бұрын

Had a Norton rep come to my shop once. The best thing I learned was how to clean a stone. Take piece of brown cardboard put some oil or WD on it, then rub the dirty stone on the cardboard in circular motions a few seconds, then wipe clean......Norton stones are great!!

@loslosbaby

7 жыл бұрын

...not great for....?

@billhawkins2674

6 жыл бұрын

Awfuly expensive at $60.!!

When I buy the air tool, I'll buy it from your site

@theonetheonlyw5483

6 жыл бұрын

Norman buy Ingersoll Rand

i really enjoyed this video. thanks so much. I use to follow my dad around every where learning from him; he was a mechanical engineer and taught me most things I know. this demonstration reminded me of him. After going through a plethora of tools that he owned, I know exactly where his sharpening stones are and will need to pull them out and get sharpening the many hatchets and axes he had. God bless.

Love your channel, I just made my first handle for my great grandpa's axe. Your videos were extremely helpful thanks very much. I'm 16 by the way, just getting into axes because of your videos. Subscribed.

Storytime with Wranglerstar is always a good video

@gpgstudios9813

7 жыл бұрын

Joe Wilshire that's what I keep saying! I love when he tells the stories of his grandfather and just any of them really lol

@gordonburns8731

7 жыл бұрын

Then when he speaks of praying for his wife and family to cure their persistent respiratory infections? Get some antibiotics for goodness sake! Is the guy so fuck stupid that he prefers intangible prayer over tangible antibiotics?

@gpgstudios9813

7 жыл бұрын

Gordon, I know what you're trying to do, but it's not working lol we will all pray for you...oh you troll, you...g'day lost soul..remember it's never too late to repent and accept Jesus into your heart...if you have questions, your local church community can hopefully help you on your road to recovery...God bless and have a nice day

@joewilshire9095

7 жыл бұрын

Well said GPG Studios. People get so offended by christianity for some reason. I guess kindness to your fellow man doesn't have a place anymore?

@gpgstudios9813

7 жыл бұрын

Just have to trust in the lord, do what's right, and turn the other cheek if you can't help. If he chooses to not believe, that is between him and the lord, we can only do so much to show him, or anyone else, the way...cheers mate

I have used files and stones to sharpen my ax but never heard of leather. I assume this is to remove the slightest of burs?

@TheRoadhammer379

7 жыл бұрын

Edward Pratt , barbers have used leather for many years to get the sharpest edges on straight razors. Leather is a micro fine abrasive, it is the last step in hair splitting sharpness.

@prattsgreenhousefarm9473

7 жыл бұрын

thanks guys I should have known that. I am a little new to this channel.

@howesfull8

7 жыл бұрын

Don't be too hard on yourself. No one knows much till someone tells them.....

@prattsgreenhousefarm9473

7 жыл бұрын

howesfull8 my grandpa always said never underestimate anyone.That you can learn something from anybody you talk to. I have found this to be true all throughout my life.

@rebel1187

7 жыл бұрын

Edward Pratt you can get a small strop fairly cheap. I use one on almost everything I sharpen, but you really don't have to have one. tungsten works well so does ceramic. I've used everything from trip of a car window to bluejeans, but believe it or not cardboard works surprisingly well.

Another great video! Very, very informative and clearly explained. Thank you.

I really enjoyed the video and thank you for sharing your skills! I will be on my own homestead in the near future and I use you as a learning source

Just wondering why you didn't use the Russian sharpener over the stone? Is it because more people can afford sharpening stones?

@chrisjones6002

7 жыл бұрын

That's my guess. Using something like that in a video about lazy axe sharpening would seem a little wrong.

@NikoBased

7 жыл бұрын

I'm also wondering why he said "I've never found anything good enough to substitute a good stone" while in the Russian sharpener video also seems to claim the same about that tool. Perhaps this is more about the response he has been getting for turning the channel into an advertisement hub. He sells those sharpeners with that russian company.

@KamonPlays

7 жыл бұрын

*Mike* Yeah, that's what I got from it. A lot of people don't know how to sharpen freehand, I think it was a great opportunity to give a crash course on it. *Shady* By using the Russian sharpener, you're using good stones. They're just attached to a mechanical guide for ease and precision.

@jeffspaulding9834

7 жыл бұрын

The Russian sharpener is good for straight edges, but axes and hatches you use for splitting need a convex edge. You can see the way he rolls the blade forward and back while working the stone - that's how you get a convex bevel. A convex bevel won't cut as deep as a straight or concave edge, but it won't get stuck either.

@davidthorne6796

7 жыл бұрын

Awesome bit of enlightenment there...my friend! Thanks for explaining that for me...us! Every cool!

If it’s a fiskars hatchet the why does it say GERBER on it?😐

@Liam-ir6xm

4 жыл бұрын

Thats what i thought haha

@andrewkrieger1736

4 жыл бұрын

Fiskars owns Gerber . Their axes are literally the same

Very good Man, 💡💡💡🔪. It’s sad 😞 that this art is vanishing from the newer generation. I learned this from my grandpa. At the end of long day at work, we would spend some time together sharping the tools for the next day. Keep updating.

You mention the respiratory infection in the end and it surprised me because for the first time ever I got pneumonia and was down for 10 days, then I learned several of my co-workers and friends got the same thing. To hear your issues from so far away makes me nervous. Best thoughts for your health.

it sounds like the dentist

I have never seen sparks from scots bright pads before, I am now popping over to Wranglerstar web page to get one of those tools and a set of pads, I already have the compressor

I hope Mrs. W is well on the road to recovery and best wishes for Boston!

Why chop up the file to blunt the tommy hawk? Why not just try to chop the rail in two? The file could have been refurbished. Now it's stuffed.

@GMNGBKBLN

6 жыл бұрын

1. Tomahawk, and its a hatchet, not a tomahawk 2. He can't chop a rail in half, because its also steel. 3. Files can't be fixed without complex machinery that would cost more than what the file is worth.

@ShadrikEaston

6 жыл бұрын

so is the file. reallly high carbon content steel. everything else tho.. yeah. *shrugs* :) Its just a file. Personally, It'd go in the steel bin and all those bits would get used at some point :)

@therrienmichael08

6 жыл бұрын

velcroman11 The Rail ?

Belt sander

praying for healing and better health in your family

Hey Cody and everyone, your cherished axe stone is what is called a "bench stone." every machine shop here in and around Rochester Mn uses them to smooth nicks and gouges on mill tables, lathe ways etc. Anyway I did a search and it appears that they are still made by Norton. I agree they are a great multi purpose stone, and tough too: I can't count the number of times I saw a Machinist accidently knock one onto a concrete floor.

Cody, 1:06 that is definitely *not a Fiskars hatchet.* It is a Gerber. I also own one and love it.

@BradVlogz

7 жыл бұрын

Hatchet abuser! Call the cops!

@wranglerstar

7 жыл бұрын

Why does is it embossed on the handle Fiskars made in Finland then?

@BradVlogz

7 жыл бұрын

Yes! I got a reply! Love the vids btw. Because Fiskars is the parent company of Gerber. I just looked at mine that i bought about 13 years ago and it just says, *Gerber and Taiwan*

@tylertuttle9489

7 жыл бұрын

Wranglerstar www.nortonabrasives.com/sites/sga.na.com/files/document/Catalog-NortonIndustrial-7362-2015-Bookmarked.pdf#page=63 Look under specialty stones !

@phildcrow

7 жыл бұрын

For the lazy, the product number is JB74 and the part number is 61463687570. They come 5 to a package.

I cringed so hard. Just bought a gransfor bruks small forest axe from Highland Woodworking for $129

@603woodsmen5

5 жыл бұрын

No way

I've left you a few critical comments recently, well good job on this one. I'm not one of those "where are the axe videos?" guys, it's not all about the axes but this was just a good one... Thumbsup!

Great instruction on the stone technique. Thanks for that!

I got an ad after 20 seconds smh

omg its blue not green 😂😂😂😂😂

@williamcox3077

6 жыл бұрын

Whew glad I saw this comment. Thought I was crazy XD

You're like Mr. Rogers for grown-ups. Always teaching with a calm & measured voice. Well, almost always. :)

I love watching your axe videos. Makes me want to get a Husqvarna 13'' axe.

What a waste of a file. You couldn't figure out another way to dull that hatchet. You are jumping the shark these days.

@IraChandler

7 жыл бұрын

Didn't seem like the breaking of the file was anticipated. Plus, he said it was old...

@prdanpr8299

7 жыл бұрын

jssturgeon if that file broke it was weak and useless

@mustachcashstash1

6 жыл бұрын

Files are brittle, because they are so hard, thats why they break as "easily" (easy being relative) as they do.

@xLakai.

6 жыл бұрын

You must be pretty hard up to complain about someone accidentally breaking an old beat up rusty file lol i feel bad for you......

Hey Cody been watching some of your videos and really enjoyed the video of you making the 14" axe handle for Dave Canterbury! I had a question for you and you might know the answer i have an old estwing camp hatchet and was wondering if you had a solution for redoing the finish on the leather washers that is flaking off?

This is the most informative video on axe sharpening I've found. Thank you! do you have any tips on using the stone on an axe with a curved blade edge?

I've got some firewood not a lot but ned til to split it by hand. So now i seen your axe videos. And will now sharpen my axe and strip the varnish. ( got it from my granddad) hoping to get a lot better comfort 😊

Codi I Absolutely love your long Videos keep it up hope Mrs.W feels better soon love you and your Family.God Bless.

Hello Wranglerstar, I just recently found your channel and subscribed immediately. I've been watching all your axe videos and have a couple questions: Why do you use kerosene or diesel over another type of oil as a solvent when using your sharpening stone? Would you recommend using the stones you use or would a water stone, like some people use for their knives, work on their axes as well? Thanks in advance, Nick.

hitting the file sent shivers up my spine!!

Prayers to you and your Family!

another good video, and very informative as always. Hope you both feel better soon and food luck to Mrs W with her marathon

i bought the lanskey stone because of this video and it works wonders!

Great content, I love learning from you, I should say it more often. Thank you!

WOW, good story of the 2 sharpening stones!!!

I totally enjoy your videos and have learned alot. Thank you.

If you always grind going off of a piece of metal you will extend the life of grinding wheels tremendously. If you watch when you grind and it's spinning into the metal you will see the material from it coming off the wheels . Great video

Sound too! I can hear the difference when it was first flipped over Excellent video I love it !

thank you for helping me find ways to be handy!

this works great for me. i got these kinds of tools at work so i just brought my axe to work and sharpened it there. i just have a small hatchet on 0,9kg for spliting wood so this works fine for me!

Another quality video from a quality individual. Thanks Cody.

Thank you for this video. I know what I'm going to do with my axe and hatchet tomorrow. Mike

i dont know what i would do with all that snow you guys get there wow im in aww by all that snow your always in my prayers every morning "ill see ya on the next one" oh i need to get a compressor lmao stay warm and thank you God Bless!!!!!!!!

I appreciate all the useful information! Just followed'

Great video Cody! I want to come plant trees!

Great video as always when your in the workshop

It was kinda soothing when he was talking about waves when he was sharpening the hatchet lol 😂