The launching of a Timber jet

Автокөліктер мен көлік құралдары

Had to think outside the runway on this one. The first time was easy, not this time. To the left, to the right, in the weeds, and broke the gear again. Finally a hand launch out of the cab was the solution.

Пікірлер: 25

  • @TailHeavyProductions
    @TailHeavyProductions14 күн бұрын

    LOL. Awesome work. 10/10. Give vectored thrust (yaw only) a shot. It works great to overcome the lack of aerodynamic steering from not having prop wash over the rudder and lack of mechanical steering via the tailwheel due to not having the prop wash make the elevator effective either at slow air speeds with this type of conversion. Can't wait to see what else you come up with!

  • @flyasakite1781

    @flyasakite1781

    14 күн бұрын

    I was thinking of Y-ing off the rudder with another servo for a steerable rear wheel. A wheel right off the servo horn. lol

  • @fp-AvERY

    @fp-AvERY

    14 күн бұрын

    Do it​@@flyasakite1781

  • @NoahJohnson7452

    @NoahJohnson7452

    13 күн бұрын

    Looks like something you would do to a timber

  • @fp-AvERY
    @fp-AvERY14 күн бұрын

    Im living for the moster you created. Love the truck launch keep posting and ill keep watching

  • @flyasakite1781

    @flyasakite1781

    14 күн бұрын

    I'm surprised it survived. We had a blast getting it off the ground!

  • @NoahJohnson7452
    @NoahJohnson745213 күн бұрын

    I’m going to subscribe just for this video

  • @SafetyThirdRC
    @SafetyThirdRC14 күн бұрын

    10 out of 10 for sure.

  • @flyasakite1781

    @flyasakite1781

    14 күн бұрын

    We tried and tried. No way was I going home without getting it in the air

  • @JDDupuy
    @JDDupuy14 күн бұрын

    Mav shes pulling to the left...no the right no the left! You guys are off the charts! Lol

  • @flyasakite1781

    @flyasakite1781

    14 күн бұрын

    Happy flying!! Thanks for tuning in

  • @Moka4all
    @Moka4all12 күн бұрын

    Love it 😊

  • @flyasakite1781

    @flyasakite1781

    12 күн бұрын

    We really appreciate you checking it out, thank you. A few more mods and we'll get flying of the ground next time. Maybe

  • @Moka4all

    @Moka4all

    12 күн бұрын

    @@flyasakite1781 subscribed 🤘🏽

  • @flyasakite1781

    @flyasakite1781

    12 күн бұрын

    Yes🤘🤘

  • @mikefortune1263
    @mikefortune126314 күн бұрын

    LOL. 👍 10/10

  • @flyasakite1781

    @flyasakite1781

    14 күн бұрын

    Thank you!

  • @edgaeta2001
    @edgaeta200114 күн бұрын

    Have you tried one of the "up-start, bungee" glider launch systems?

  • @flyasakite1781

    @flyasakite1781

    13 күн бұрын

    I have not. What's it all about?

  • @edgaeta2001

    @edgaeta2001

    13 күн бұрын

    @flyasakite1781 It's like a real long rubber band. You would have to. Look it up online. It is roughly several feet of surgical tubing tied to several feet of thin nylon line nailed in the ground, Think sling-shot. If you do look It up online, it's called an upstart for radio control gliders. Or talk to some rc glider guys. I made one and used it on an edf that was a real POS. It did get it launched up in the sky.But the jet was a real crapper.

  • @flyasakite1781

    @flyasakite1781

    13 күн бұрын

    @@edgaeta2001 I haven't seen them but hearing you describe it gives me horrible or I mean great ideas.

  • @edgaeta2001

    @edgaeta2001

    13 күн бұрын

    @flyasakite1781 They work really well but you have to be very careful. If it snaps loose, it can ruin your day. I used them with my gliders in the past.. Watch some videos about rc glider launching.

  • @edgaeta2001

    @edgaeta2001

    13 күн бұрын

    There are several rc bungee launch videos on KZread, I just finished watching some.

  • @sethbyas2452
    @sethbyas2452Күн бұрын

    It's too heavy

  • @flyasakite1781

    @flyasakite1781

    Күн бұрын

    lol I like making flying boat anchors. But it is for sure a tank

Келесі