The Game Changer Removes Broken Windshields Like a Champ 1
Жүктеу.....
Пікірлер: 21
@someguy94713 жыл бұрын
I bet it’s nice for quarter glasses especially without having any cups taking up room on the glass because some of those quarters are too small for that. Very nice job once again Dan! Keep the videos coming like seeing the tool in action👍
@brianneeley6366 Жыл бұрын
This would should make cutting out the windshield of a wrangler or bronco easier, since there isnt any trim around them.
@impexautoglassNC3 жыл бұрын
Dan with that big stick thought he was the Rock in walking tall...
@DKnewsandreacts4 ай бұрын
good oll dot 177 there
@user-cc5jp4qw3o10 ай бұрын
Hi name of the tool please
@rolladeckwindshieldsetting7747
10 ай бұрын
It's called the "Game Changer" available @rolladeck.net
@larryd44073 жыл бұрын
Nice job
@jglassman11223 жыл бұрын
Does this use a thicker wire than a traditional cut out system?
@rolladeckwindshieldsetting7747
3 жыл бұрын
This tool will pull any fiberline or wire. Even braided wire.
@edersafelite2 жыл бұрын
What line do you use? Mine seems to break pretty easy. TIA
@rolladeckwindshieldsetting7747
2 жыл бұрын
In this video we are using Equalizer Squire steel wire. The reason is when fiberline comes in contact with a sharp edge, it will easily snap. When removing glass that is just cracked, we use Swift. Fiberline.
@wishyouwerehere62263 жыл бұрын
How long would it have taken you to cut it out without doing the demonstration? Just trying to get an idea if it adds a lot of time to the job.
@rolladeckwindshieldsetting7747
3 жыл бұрын
I haven't timed it so I don't have an accurate number for you. At the speed it pulls it shouldn't take more than 3 to 5 minutes maybe less. keep in mind that you don't have to reposition a suction cup so the tool moves around quite efficiently.
@Heafust2 жыл бұрын
Would it really be impractical to just leave the extension on? Use it in that longer mode all the time?
@rolladeckwindshieldsetting7747
2 жыл бұрын
It would be up to the user. You can if there's enough clearance.
@thebrokenlightbulb58919 ай бұрын
So the blade cuts the bead as well as the steel line?
@rolladeckwindshieldsetting7747
9 ай бұрын
No. It serves as an anchor for the tool. Much like a cleat that bites into the bead to stabilize the tool
@DG-xx5sc3 жыл бұрын
🤣🤣🤣🤣🧐 Got a gro pro mounted dawwmm!! 👌
@scottdandrews13883 жыл бұрын
Sorry, cold knife and extractor still the best way for us. That's just another more complicated wire cutter.
@rolladeckwindshieldsetting7747
3 жыл бұрын
Don't be sorry, do you. After 35 years in the trenches I have chronic tendonitis and shoulder issues that motivated me to come up with another alternative to pulling cold knives. If you are good with what you have, carry on. There are plenty of professionals out there that are embracing this new technology. Good luck and stay healthy.
@306showtime
2 жыл бұрын
Under 5 minutes with cold knife and extractor, this is just silly.
Пікірлер: 21
I bet it’s nice for quarter glasses especially without having any cups taking up room on the glass because some of those quarters are too small for that. Very nice job once again Dan! Keep the videos coming like seeing the tool in action👍
This would should make cutting out the windshield of a wrangler or bronco easier, since there isnt any trim around them.
Dan with that big stick thought he was the Rock in walking tall...
good oll dot 177 there
Hi name of the tool please
@rolladeckwindshieldsetting7747
10 ай бұрын
It's called the "Game Changer" available @rolladeck.net
Nice job
Does this use a thicker wire than a traditional cut out system?
@rolladeckwindshieldsetting7747
3 жыл бұрын
This tool will pull any fiberline or wire. Even braided wire.
What line do you use? Mine seems to break pretty easy. TIA
@rolladeckwindshieldsetting7747
2 жыл бұрын
In this video we are using Equalizer Squire steel wire. The reason is when fiberline comes in contact with a sharp edge, it will easily snap. When removing glass that is just cracked, we use Swift. Fiberline.
How long would it have taken you to cut it out without doing the demonstration? Just trying to get an idea if it adds a lot of time to the job.
@rolladeckwindshieldsetting7747
3 жыл бұрын
I haven't timed it so I don't have an accurate number for you. At the speed it pulls it shouldn't take more than 3 to 5 minutes maybe less. keep in mind that you don't have to reposition a suction cup so the tool moves around quite efficiently.
Would it really be impractical to just leave the extension on? Use it in that longer mode all the time?
@rolladeckwindshieldsetting7747
2 жыл бұрын
It would be up to the user. You can if there's enough clearance.
So the blade cuts the bead as well as the steel line?
@rolladeckwindshieldsetting7747
9 ай бұрын
No. It serves as an anchor for the tool. Much like a cleat that bites into the bead to stabilize the tool
🤣🤣🤣🤣🧐 Got a gro pro mounted dawwmm!! 👌
Sorry, cold knife and extractor still the best way for us. That's just another more complicated wire cutter.
@rolladeckwindshieldsetting7747
3 жыл бұрын
Don't be sorry, do you. After 35 years in the trenches I have chronic tendonitis and shoulder issues that motivated me to come up with another alternative to pulling cold knives. If you are good with what you have, carry on. There are plenty of professionals out there that are embracing this new technology. Good luck and stay healthy.
@306showtime
2 жыл бұрын
Under 5 minutes with cold knife and extractor, this is just silly.