Definitely looking forward to seeing how the system changes in future years! Thanks again for showing off my concept!

@eduardoangelico717

Ай бұрын

Hey dude, I would like to know, where do you make your designs for concepts? Dran Saber ended up being very cool, like your other concepts

I’ve had this idea for a very long time ever since CobaltDrake and Team Pendragon. So you know how Pendragon’s Beys are a reference to Bakuten Shoot. What if the next antagonist rival teams for season 2 and 3 are references to Metal Fight and Burst in terms of protagonist beys (Pegasus, Sagittario, Valkyrie, and Spriggan). And then for season 4, the penultimate antagonist team will have the primary antagonist beys from each generation (Zeus, Nemesis, and Lucifer).

@rogkiu8642

Ай бұрын

Sounds pretty cool

@ThereIsOnlyHell

Ай бұрын

Actually, I think it would be better to do Valkyrie and Longinus for burst, But make it Pegasis and L Drago for Metal Fight. L Drago won a recent poll anyway so... 🤷‍♂️ They absolutely HAVE TO MAKE IT. It wouldn't make sense for them not to

@MrRed-le4ek

Ай бұрын

@@ThereIsOnlyHellThey are remaking L-Drago, but what I’m talking about is that they should make beys that are “inspired” by the likes of Pegasus, Spriggan, Zeus, etc (and with their own special symbols just like that iconic Bakuten Shoot logo). So similar to Drake and Tiger.

I really hope there are more components introduced in the future. We're only NOW getting gimmicks in bits and spin. Kinda crazy. I really hope there's some big changes in the system

@nuc

Ай бұрын

It took a few years for every generation to start going really heavy with gimmicks and such. We prob won’t see anything too wild until maybe season 3? I’m hoping it doesn’t go overboard though.

They are definitely doing fused ratchet and bits as a new series gimmick

@lloydfs5114

Ай бұрын

The anti bit-release bursts lol

@Kaidhicksii

Ай бұрын

I hate those.

I think it would be cool if they did custom ratchets like how they did engine gear blade based in g revolution, like more customized so a 3-60 for Dranzsword could be more specialized around Dranzsword’s contact points. Like how dragoon g’s clutch base was different than Driger g’s. Kind of like how variants work for beyblades.

I like the idea of a Metal Ratchet just to give some of the lighter beys more of a fighting chance. A lot of cool designs just fall to the wayside because they're not heavy enough right now and that really sucks.

I honestly just want the power creep to be as slow as possible. Some material innovations for ghe bits would be fine though- I think the ideal attack bit might be POM rush. Same as rush, but with less friction.

@Tuesdayz

Ай бұрын

for real i hope this gen doesn't introduce blades that are way heavier than they are now

@ciaojay7025

Ай бұрын

And it goes smoother over time

Adding metal definitely seems like the best thing they could do with ratchets. One big flaw I’ve seen especially with tall bits and ratchets is that because all the metal is in the blade the center of gravity is too high to the point where if it loses its balance and tips over then it won’t be able to upright itself. So adding metal to the ratchets or the hollow inside of the bits would help with this problem.

An angle compass would actually be a really good idea. It could help keep your launch angle consistent, say you find an angle that works really well, you can remember what it looks like on the compass and recreate it.

Metal Ratchets would be a bit of an issue where what if they ended up damaging other Ratchets...

@nuc

Ай бұрын

I feel like ratchets hitting eachother is much less common than blades hitting ratchets. Even now ratchets get chewed up because of blade contact. If anything… metal ratchets would help.

@jackyshek9912

Ай бұрын

@DarkKirby8976 ​@@nuc Sorry for the large text in advanced, I disagree with the idea of metal contacts on rachets since the locking system requires the outer plastic part of the rachet to move. If you look closely when you unlock the bey (especially on balance/attack bits) this part bends due to the white tab pushed out from the bits to create resistance which is why it is plastic and not metal. If it were metal fused with plastic, the rachet would probably break faster than a fully plastic rachet or defeat the purpose of bursting. Jake, I think metal rachets would be nice but from an mechanical engineering/economical standpoint it's much more ideal to have the clear part of the rachet metal for weighting . Also I think this generation is very interesting since the bits will probably be unable to incorporate gimmicks like burst drivers (we could see bits/rachets fused to accommodate space for gimmicks like these). I think what they'd do is focus on the physical design of layers until the second season where we may see layer gimmicks/customization.

@DarkKirby8976

Ай бұрын

@@jackyshek9912 Rubber contact points would make a good cushion for the ratchet by taking a page out of Rock Zurafa's books cause Rock Zurafa has the R145 Spin Track

I don’t think splitting the blade is going to be a good idea, I mean what will be the purpose of it. In Plastic and metal gen they were 2 parts (The face and the Fusion wheel is the same thing tbh) since the beginning. When in burst they did turn the layer in 2 parts it served a huge purpose instead of making a person happy, the beys had different burst resistance and that could be changed but since the burst system in X is redesigned it can’t be done. We even saw the splitting of blades be even more useful in DB/BU as savior core giving every layer bound gimmick, guilty core adding more weight, belial’s burst stoppers

@linkkicksu

28 күн бұрын

because they could make the plastic part act like a spin gear, determining spin direction and having gimmicks in it like weight distribution or engine gear like gimmicks with a coil spring

I like to think we are still in the manga promo single layer era which doesn’t usually get a TV adaptation. There really haven’t been many fire releases yet

5:21 I hope not

I do think being able to experiment with more materials or even just more dynamic shapes would help Beyblade X a lot. My only concern is with the longevity of Beyblade X because of how TT likes to advance systems, I feel like they've kind of pigeonholed themselves with how the current designs are. Blades can't be divided too heavily without running into the previous problems you mentioned, ratchets can't be more dynamic because they're needed for the burst mechanic, and bits can't be overly dynamic either without ruining the xtreme dash gimmick. I'm sure they have some ideas but I'm not sure how they can make any bigger advances after another system or two.

if the plastic part of the blade gets separated, I hope it ends up like the Spin Gears of plastic gen perhaps 'attack rings' could have restrictive slot geometry, so more rounded ones like Hells Chain or Wizard Arrow have could fit both left and right spin gears, meanwhile ones that are more jagged like Dran Sword or Phoenix Wing would only fit spin gears for their intended direction this could open the door for way more unique dual-direction blades with different strategies for each direction. They could also implement weights into the spin gears so you could pick one that has balanced, imbalanced, compact or wide weight distribution depending on your build. They could even implement a gimmick with a coil spring that you wind up and triggers by the bit hitting Xtreme Line and creates a burst of speed like the Engine Gear spin gears in plastic gen. Beyond that, I'd also love to see ratchets get more variety and gimmicks, and I'd love to see rubber grip bits or ball bearing bits.

Some of the biggest things I want are Metal/Rubber Point, weights for the grip, and an official long winder that’s similar to the Dragoon Winder from Bakuten Shoot

In general this is a great generation for kids who didn't get to grow up with Metal fight, and having all metal beys back in general leaves a warm feeling inside since I absolutely loved Metal fight as a kid

I feel like the Future for Beyblade X would be like this. You will see some Beyblades with Steal Spin abilities (Previously on Metal and Burst gen) you will see a Duel Spin Beyblade that can do both Left and right spin IF were lucky we can get an unburstable Beyblade that includes a 0 rachet making it impossible to burst no matter what and we can get some collaberations beyblades. Think about it the last collaboration beyblade was Hello kitty and that was awesome but it was limited so imagine a Beyblade X Hello Kitty Beyblade. If they want to go big they have to collab with some more things like what hasbro is doing with Transformers Beyblades. The future of Beyblade is in both Hasbro and Takara Tomy. Don't screw this up Hasbro and we will forgive you

@Neximatez210

Ай бұрын

Those would be interesting in Beyblade X, but let’s just hope that it’s not overused like it was in burst. We want the beys to still be equal and have the ability to burst. If there are so many X Beyblades were super overpowered, the game wouldn’t be fun anymore.

@KiritoandNash2022

Ай бұрын

@@Neximatez210 Yeah your right but it would be cool if they do those ideas I mean they don't want it to be like Burst all over again. The only way it could not be like Burst is if it has amazing abilities like very fast stamina or maybe a Super Fast Beyblade that you have to master the movements but overtime you can awaken it and make it even faster but I doubt that would happen as it would be SUPER DANGEROUS

@Damianwindmill

Ай бұрын

@@KiritoandNash2022 I can see them doing something like they did at the end of Metal Masters with Twisted Tempo, with a stamina beyblade that has no sides on the ratchet, so it’s impossible to burst, with a bit like metal ball. That would be hype, and it’s only one release so it wouldn’t change the game so much to the point where it gets boring.

@KiritoandNash2022

Ай бұрын

@@Damianwindmill Yeah and I can see them doing something similar to Maximum series with each Beyblade having some interesting gimmick like the heaviest attacker or tallest Beyblade or something like that

The ratchets are kinda in a similar situation as spin tracks in MFB. A lot of the basic spin tracks that were just height were so similar. But it did give unique spin tracks here and there like claw and horn 145. Beyblade X would be harder to do bc it has to hold the bursting gimmick. But they could shape it to have rollers or spiral shape edges. Give it some uniqueness outside material changes

Some ideas I had for the rachets R3-80: very similar to TR145 from Metal saga P5-60: similar to Paradox: one mode give stamina in exchange for defense and vice versa. W4-70: wider prongs for more weight added B1-60: has a bit of a bound gimmick where it can be pushed to an extent and won't burst, but any further, and it will.

I hope that the stadiums change too, like in Beyblade Burst turbo/choZ the stadium had rails that went fully out of the stadium to get much speed Or even a stadium with a spinning motor like in sparking/surge

Hopefully, we will get the HWS treatment, but given how the ratchet serves the purpose that layer teeth/slopes did for Burst, idk how it would work.

if they are really pushing this as a sport, customization is going to take top priority, you made solid points about using different materials for the bits and ratchets. so yeah P1-60(plastic) R1-60(rubber) M1-60(metal) etc etc... they would have to do that for every ratchet and it would take a long time to launch in waves which is a drawback, but for right now the easiest thing to do is make sure every bit and ratchet has the same colors available as theres a few that dont have a certain color yet. like maybe i want a black out drandagger with a black 1-60 with a yellow quake. blades are easy as majority in boosters have multiple colors. so again that can also drive sales for more boosters for them with maybe an incentive of something new included

I hope that there will be mode changes in X

i saw a video talking ab future beyblade x gimmicks and stuff very similar to this one, and he showed a plastic gen bearing and i think it'd fit really well into x, since the one i saw was kinda not very wide, it kinda looked like needle but it spun

I think the next major gimmick for X would just be the blade being able to split into multiple parts like in 4D and Zero G, but that might need a secondary locking mechanic to get it to work...

I totally agree with the ratchet and bit parts, but i don't think they need to change up the blade much, at least start making them like differently shaped like not as circular all the time like maybe some more recessed surfaces for like a kind of imperfect circle

It would be better that they implement gadgets or pieces that can be added to old x beys so they can still be uses in meta or so they dont be taken away so fast

They should do magnecore for beyblade x. I think that would be awesome to see and of course engine gears

I feel like metal rush would be good as the whole thing with rush is that it preserves stamina during extreme dashes and metal would have less friction and have more stamina so it would have a lot of stamina

I have an idea for a gimmick/system in the future where they scrap the gears and the extreme line and replace it with a magnetic type system where the magnet inside the bit plays a bigger part than just providing weight and having it attract the bey to do an extreme dash

@tariniamidaala8419

Ай бұрын

This will make it easier for defense/stamina types to do an extreme dash and it could make way for the driver gimmicks of burst. It would make an extreme dash based on spin speed not type advantage

With the balance and attack bits having a resistance. I thought a rubber ratchet can even the playing for the little to non resistant ones like ball to where it's only meant for them.

I hope one of the next gen of x beys has a tornado wyvern gimik so that an xtreme line attack rolls of and send the attacker to the xtreme finish zone

I hope they do more of a burst god kinda upgrade where still 3 parts just more unique

Engine gears!

UHMWPE Needle or ball might be nice. Smooth material and less prone to breakage

The only way we can get new things I personally think is up to the one who is writing the manga of beyblade x it all depends what ideas his has for the manga and the bayblade I think they usually go by the ideas of the manga creators

I'm scared of that M3-60 rachet because the small metal contact point of it has a possibility to fly on my face and is the left spinning beyblade gonna use by Kamen Y? i know its not but...

My idea is that we can remove the gear chip and the prongs on the bey can move and lock to lock in the newly added gear chip

i wanna see a Bit like Metal Saga's Coat Sharp tip

Can’t wait for the left spinning bey’s picture to be ANOTHER dragon

@lotusaqua3137

Ай бұрын

Correct

I’m hoping for bigger ratchets akin to BD-145 and as for launchers I want something like the burst trigger

Instead of the hybrid wheel, what about an fully customisable blade? Like, many pieces you can use to make your own customized design, and they could even not be limited to metal. Having the ability to make your own design would make for a great final season.

@linkkicksu

28 күн бұрын

would be too fragile

I really want to see a Fantom Orion remake

Will we get new heights like 4100 or 9-50?

What if they started making unique upgrade rachets for some of the beys wing 3-60 rachet for Dran Sword as an example And the wings are rubber tipped on the front for harder hits

we need the quest bit

@NightSpeed458

Ай бұрын

NOOOOOOOOO NOT QUEST!!!!

@whitelatex

Ай бұрын

oh my god that would be amazing! imagine an x ​​dash with a suck tip, they are eguies style or rather a tip that is a wheel like one of the burst tips!

@whitelatex

Ай бұрын

Just for the joke, they almost made a tripio Japanese people are crazy, they're going to make one hahaha

@MDFarro2010

Ай бұрын

Easy extreme finishes if it’s in the Center

I swear the left spin blade is just gonna be a left spinning launcher

I hope they keep them around the same size so we can use the og year 1 beys still years later burst up sizing was really annoying

More customization. More unique stuff. Yes.

Man if they add bound gimmick or springs to these beys like the Valkyrie beys it would be insane!

@nuc

Ай бұрын

That would be interesting.. I wonder how they could do it with the x system being metal.

@linkkicksu

28 күн бұрын

Could do it like Bound Defender from plastic gen where there was a springy soft plastic sub-attack ring that would absorb recoil from hits

How about a ratchet-blade hybrid like Nightmare Longinus?

I want more remake, GIVE MEE MOAAAR

We need the blader and bey bond lol fr 💯

A stadium with 2 extreme lines. It needs to happen!

@MDFarro2010

Ай бұрын

How would that work

Will they do gimmick like bakuten shoot, metal fight or burst

@triview129

Ай бұрын

I include every season like g revolution and shogun steel

Funny one piece joke at 1:31

@MindcraftMC

Ай бұрын

I really did not expect that one

The nostalgia project better do Variares or I will cry

@ilinnuc did you see the dran dagger 2-80 gp

Wouldn't a rubber ratchet make it easier to burst

What other ratchets can we get

Kinda curious if you bought any other Raise Buckle from Geats. I recently got Beat and Boost MK9.

@nuc

Ай бұрын

I haven’t yet. Im waiting on the plosion rage buckle :)

@astrangerontheinternet5500

Ай бұрын

@@nuc I love Buffa but I still haven’t seen the movie with Plosion rage yet 😅

I hope L drago is the left spin bey get announce in beyblade x

They need to bring back chips

À could gimmick to add could be marble, it could be on every part and for any purpose

Yeah let’s rip 0ut the stamina tank c0mb0 with left spin X-treme attack

Metal ratchets would be cool , would consider a two piece blade but that might be a negative not looking forward to left spin don't know why but it bothers me

Metal disc ball will rule all..

Are you going to be talking about the transformers and beyblade x hasbro collab?

@nuc

Ай бұрын

Eh, I will at a future time.

rubber rush

How about bearing bit metal bearing bit rubber bearing bit and a bit that jumps when activated like on trygle

Fan Beyblade name: DRAN X-CALIBUR

rubber flat maybe?

When are the beyblade x season 1 releases ending

@nuc

Ай бұрын

July should sorta be the end of “season 1” if its like burst but… since the anime didn’t start until October then THAT would be the end? Honestly im kinda confused

@MrRed-le4ek

Ай бұрын

@@nucSeason 1 will end around Fall (September or October) based on the leaked product line from Zankye.

Finally I'm early 😅

I want a blade with rubber integrated. Give me my revival of L Drago

@ValTek_Armory

Ай бұрын

paired with a POM bit, I think it could be good

Ratchets are boring because they're going to really expand on it later. I'm speculating btw, what does everyone else think?

i dont have a 3D printer but i am wondering as to how a free spinning gear bit would feel like. shitty gimmick, for sure. but hey. anything goes for beyblade. Also Takara should go back into giving Plastic-gen type of accessories a chance. those spring-loaded launchers that in theory gives you more launching power looks pretty badass.

What the difference between ux and x beys?

@nuc

Ай бұрын

UX is a different sub-line. Really the only difference is the metal in the middle is plastic so the balancing is different.

@vers-over1886

Ай бұрын

@nuc is it like more competitive use?

@nuc

Ай бұрын

I wouldn’t say competitive has anything to do with it. Just a slightly different system design that TT pushes as “unique”

I hope that the can do something similar like what they did with shogun steel. Shogun steel in my opinion had a great system to make your beyblade unique to you.

@nuc

Ай бұрын

Yeah shogun steel was cool in concept… but it allowed beys to get SO heavy and that was bad for the meta I think… definitely underrated though.

It sounds like your whole wish for the parts is to make things more rare and difficult to get, and then for the whole blade in general is basically the same power creep that happened throughout burst where basically by the end, all of the parts that you'd bought at the beginning or earlier in the generation were basically useless by the end due to increased size weight and gimmicks. So I can't personally fully support these ideas.

I’m not buying from mall of toys, it’s Hong Kong products and I use the beyblade x app I need them points

@nuc

Ай бұрын

That’s valid. Getting Japanese only is so tough 🥲

5th

Blud is yappin💀

Five minute gang

Hey design idea: similar to metal fight, but no face bolt. There would be an energy ring that also has the bey’s character art in the middle. Next is the metal/plastic blade part that makes the most contact. Then a core that touches the energy ring that can be different designs like in metal fight. Lastly is the tip that would go through all the other pieces and connect to the energy ring. No pieces flying apart, and limited metal on the blade so if it does bounce out, no one is getting seriously hurt by it.

I hope we don’t get any of those the reason I love this beyblade x cause it’s going back to the roots of metal fusion and masters

The biggest problem with bayblade x are definetly the rachets. Compared to spin tracks of metal fusion they are so boring

@yusheitslv100

Ай бұрын

Unfortunately, it doesn't look like there's enough room in the design for ratchets.

@linkkicksu

28 күн бұрын

They could do something like the clutch base on Driger F in plastic gen. The bit spins freely from the rest of the blade, only balancing on the gear chip so as not to loose speed from recoil, but then the ratchet can clutch the bit when it impacts the Xtreme Line in order to transfer the speed of the bit to the blade

13th

First :3

First

Less parts is better. Quaddrive beyblades are trash