The XR style is the greatest Onewheel platform and you guys are the best!

This looks like a genuine retail product. Thanks for all of the hard work. I'm so thankful that People like you guys exist. Without you we would be stuck with the patent trolls at FM.

@Fungineers

7 ай бұрын

Thanks Travis ❤

You have just made every Onewheeler's dream come true. The guys from Fungineers have pushed the limits even further than Tony with that XR like plateform and now FM must be in a cold sweat...Funwheel 2024 is probably my next Onewheel. How much does a complete Funwheel weigh?

@Fungineers

7 ай бұрын

Thanks Chris for acknowledging our efforts. The team worked really hard to make all our dreams a reality.

@Fungineers

7 ай бұрын

The motor is around 18lbs. The complete board should depend on your battery. Around 35 lbs or a bit more.

Wow, very impressive! Crazy how far you’ve come since the first Funwheel three years ago. Incredible work!!

This is the best thing to come along for onewheelers . ❤❤

So fricken clean. Stoked at the progress vesc has made.

It is now so easy to build a DIY board. thank you for your continued hard work on making that a reality.

Incredible ❤ thanks for the invested energy in the name of the community!! 😍🔥

Cannot wait to see these out in the wild 🥰 2024 is looking good!

This looks awesome! Great work !!

This is incredible! Looking at building my own Funwheel and this is awesome!!

FUNTASTIC!!! Just placed my order! I have been holding off building a VESC hoping you guys would come up with an amazing solution. You didn’t disappoint! Can’t wait to see what you surprise us with next!

@Fungineers

7 ай бұрын

❤

@HoCtane248

7 ай бұрын

I especially like the space that leaves room for the 2s2p battery. I hope that means you’ll be creating a 18s2p battery pack that uses the molicel p45b. We have cold weather and long trails with some major hills around here in PA! 😉

Nicely done. Can’t wait to order one. Get your orders in all, I see law suits on the horizon!

@Fungineers

7 ай бұрын

We have already been issued C&Ds by FM before :D

@carsonkeersemaker6362

7 ай бұрын

@@Fungineershave u figured out a way to get around it though. I’m scared we won’t be able to get one because of stupid FM.

@DarthTinderalla-qm9zw

7 ай бұрын

@@Fungineers I'm amazed they haven't taken your site down. Unless you threatened to actually take them to court and show all of the prior art your works based on.

Great work @fungineers, any idea when would it be available to purchase on the website?

Jaw dropped. Have to get on it!

Well done all involved, am so pleased to see this alternative coming together. Will definitely be keen to look at this as an option in the near future. Will you be shipping to the UK & how will any required support/maintenance work if required?

@Fungineers

7 ай бұрын

Thanks! Yes we will be shipping worldwide. We will support you with maintenance and will have some local experts handle maintenance for a small fee.

So, can I use this with stock XR rails and a stock XR motor?

Is it possible to add a code lock feature that disables the board from activating until entered by the user. Maybe even use the beeper for theft prevention.

@Burnerzcrew

7 ай бұрын

If you have an iphone, you can use floatcontroll , it have a pin lock feature!

@Fungineers

7 ай бұрын

Surfdado has already done it he has a video on if as well!

Great job! Do the lights switch white to red/red to white when riding battery-side forward? What kind of plug are you using for the front footpad? Can you connect a regular FM footpad? I'm not a fan of the battery indicator leds (my GTs are blacked out). Thanks!

@Fungineers

7 ай бұрын

Yes they do switch colors and you can choose the colors. You can use a regular switch craft connector (like the XR) for the footpads and use xr footpads.

@whatebrige

7 ай бұрын

Thanks! My order is in!@@Fungineers

I am looking inside the box and see lots of wires, why are they needed to be so long. Could you guys make it the correct length and save the space?

Shut up and take my money 🤩

‼ Just wondering if you might ever offer a complete r&r kit to retrofit an XR ? _( .. not needing any soldering of parts...)_

👍👍

What connector do I need to buy in addition to have this work with a hypercore?

@Fungineers

7 ай бұрын

This new box does not support a hypercore. You can get a box from makerspev.

Say If I were to buy the Funwheel Controller Box Complete, and the Funwheel Battery Pack Complete, could I use my stock Hypercore motor, and OW+ Rails to vesc it? Im weighing my options and seems to be worth the money and easier to build.

100 boxes? Is there even a chance of getting one?

Will the footpad be available as well?

@Fungineers

7 ай бұрын

Yes we will be making them in a few weeks and having a detailed video.

Make this as easy to put together and setup as the Floatwheel then I’m in.

Is the fully assembled footpad available?

@Fungineers

7 ай бұрын

It will be made available in a few weeks.

@terreonnhenry5778

7 ай бұрын

Well then in a few weeks I'll be able to place my order. Hopefully Batch two isn't already all gone. Great work!!@@Fungineers

DO the funwheel boxes only fit the thunder rails?

@Fungineers

Ай бұрын

All XR style rails

@ras0ne

Ай бұрын

@@Fungineers Ah...so I'm assuming most XR pads, bumpers, and etc would work also.

Can we use XR footpad with this?

@Fungineers

7 ай бұрын

The footpad connector in the box is the same dimensions as the XR switch craft connector so you can swap out our connector for an XR female connector and use rhe XR footpad!

Take my money

What footpad sensors are you using in this?

@Fungineers

7 ай бұрын

These are the Fungineers footpads. The stompies 2.0 will be on sale soon it will be a complete footpad with connector.

@carsonkeersemaker6362

7 ай бұрын

@@Fungineerscomplete foot pad as in with grip tape and the lights? or is the vesc box what has the battery led light?

@Fungineers

7 ай бұрын

@carsonkeersemaker6362 there are 2 options. For people using 3d printed boxes with metal lids, we will have footpads with led built in. For metal boxes, there wilbe led in thr Box and a cutout on the footpad with a glass window.

@shawnvanscooter1645

7 ай бұрын

@@Fungineershow soon for sale?

Has FM come after you? Or are you prepared for if they do??

@MrDmadness

7 ай бұрын

They've been making this a long time and continue too.. ffm

@psydwayze

7 ай бұрын

@@MrDmadness Word. Yeah, I’ve been following. But the closer they get to true plug and play and fully built orders, the more likely it is FM will see them as a threat. Of course I hope not!

@MrDmadness

7 ай бұрын

@@psydwayze future motion will have its "pateht" challenged soon, then the market will be cracked wide open

@Fungineers

7 ай бұрын

They have issued threats and a C&D in the past :D

@psydwayze

7 ай бұрын

@@Fungineers The community stands behind you!

i'm not seeing a rear footpad.

@Fungineers

Ай бұрын

We don't have one yet mainly because there's so many options like craft and ride and TFL rear footpads. Any XR compatible footpad and fenders will work!

Can I just buy the box

@Fungineers

7 ай бұрын

Eventually we will be making cast alu boxes which will be much cheaper so that everyone can get a metal box! For now unfortunately we are only focusing on complete solution.

@MFD005

7 ай бұрын

@Fungineers that's awesome to hear.

You skipped all the other wires after the power hook up. Kinda disappointing. I was watching the video for just that.

@Fungineers

22 күн бұрын

Hi, there is a separate video for setting up the controller box. If you go to our website, and clock on the User Guides tab you will find it there. Please let us know if you need help with anything