The first TRACKDAY! (FULL E36 RACECAR Build series) (Part 22)

Автокөліктер мен көлік құралдары

Finally the car is hitting the track at Circuit Zolder!
After the full rebuild this is the moment that mattered the most, and it paid off. What an incredible car and wow did it live up to what I was expecting.
The grip levels and balance are just amazing and this is still with the 225 NS2R tire, trying 245 R888 next. That will be even more grip.
Also the B28 is so much faster compared to the B25 and makes up for all the power the car was lacking before.
Next part is getting the car ready for the Nurburgring, the place that matters the most. After this good of a shakedown I have a lot of confidence Nurburgring will go well.

Пікірлер: 47

  • @NWGarage
    @NWGarage Жыл бұрын

    Awesome video !

  • @silaskrag-vrolijk9533
    @silaskrag-vrolijk95332 жыл бұрын

    Car sounds great and looks like it drives great. However small observation, through long corners your oil pressure drops pretty significantly better to fill it slightly over full to save the engine from oil starvation. Or maybe even a baffled sump, don't want you to lose the engine so close to it being rebuild!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Thanks for noticing, I’ll definitely fill up the oil a bit more to prevent this issue

  • @TheTechnoaddict

    @TheTechnoaddict

    2 жыл бұрын

    @@TJS36 get a baffled sump. A must on racecar.

  • @FoodFighter46
    @FoodFighter462 жыл бұрын

    Amazing maiden track for your E36! Glad your car was running fine for the most part!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Luckily no major issues, a lot better than I expected

  • @maxlagewaard8959
    @maxlagewaard89592 жыл бұрын

    car looks absolutely gorgeous with the respray. Nice job

  • @TJS36

    @TJS36

    2 жыл бұрын

    Thanks a lot!

  • @jasonlouis5498
    @jasonlouis54982 жыл бұрын

    That was cool, glad you got to finally get it to the track!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Yeah it was a blast!

  • @martijn826
    @martijn8262 жыл бұрын

    Lovely editing 👌 Good job building it so fast

  • @josecarolina3215
    @josecarolina32152 жыл бұрын

    Great to see the car back on Track 💪

  • @TJS36

    @TJS36

    2 жыл бұрын

    Thanks man!

  • @Zuichi100
    @Zuichi100 Жыл бұрын

    It looks like it understeers quite a lot you might want I little more downforce in the front

  • @charlieward7606
    @charlieward76062 жыл бұрын

    good shit!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Haha glad you like it

  • @evas36avus
    @evas36avus2 жыл бұрын

    Awesome man! Must be a pleasure to drive it again on the racetrack after all the work! One question, can you share about the whell alignment done?

  • @TJS36

    @TJS36

    2 жыл бұрын

    Thanks man, nothing special at the moment. -3,0 camber front and rear. 0.1 toe out in the front 0.1 toe in in the rear. Camber is not ideal, best would be to have more at the front but the camber plates are maxed out

  • @Lsantos78
    @Lsantos782 жыл бұрын

    Hello, congratulations , what kind of track app are you using for laptime?

  • @TJS36

    @TJS36

    2 жыл бұрын

    Harry's laptimer

  • @Lsantos78

    @Lsantos78

    2 жыл бұрын

    @@TJS36 Thank you! been enjoying your videos, keep upt the good work, you doing a great job!

  • @jasonlouis5498
    @jasonlouis54982 жыл бұрын

    Forgot to add - which return crossover are you running on your fuel tank? External or internal? Reason I ask is that I read that the External (white pump hanger) runs better than the internal (blue pump hanger). I almost changed from internal to external but read somewhere that some road racing school said they had less problems with external. Apparently, you can run the external almost to a quarter tank with out the fueling issues on the long sweepers. The internal was said to have issues below half a tank. Just wanted to share that with you.

  • @TJS36

    @TJS36

    2 жыл бұрын

    That's definitely something to look into. I'm pretty sure I have the blue one so that can be a good explanation why it starved

  • @loel2312
    @loel23122 жыл бұрын

    Heyhow, nice driving! Really like how you fly over the curbs. What kind of LapTimes do you drive? I´m quite often with my 600 motorbike in Zolder and I have no idea how fast you are with a car arround the track.

  • @TJS36

    @TJS36

    2 жыл бұрын

    Thanks man, last year 2:00 was the fastest, in this session I did a 2:01

  • @SuperWhiteBarry
    @SuperWhiteBarry2 жыл бұрын

    Great to see the car running in new trim and that it performed well. Nice to have more power I guess, what are you making with the 2.8 and all the other mods? 240 bhp? Small issue @6:37? Your oil lamp is on briefly (red)...

  • @TJS36

    @TJS36

    2 жыл бұрын

    I can't really tell, if it's between 220-230 I would be really happy. Glad you pointed out the oil light, didn't see that yet. Wonder what causes it because oil level is good and temp/pressure showed no issues

  • @SuperWhiteBarry

    @SuperWhiteBarry

    2 жыл бұрын

    @@TJS36 You didn't dyno it yet? Still running the OEM mapping on the ECU? I think you can get more out of the engine if you go to a proper tuner considering all the mods, intake/headers/exhaust... With only basic knowledge on BMW M52 engines it would be a wild guess, so I reluctantly can only speculate from my point of view. I know the M54's oil pump is a weak point... It still seems to me, assuming the oil pressure switch isn't toast and the oil level is correct like you say, that you're (briefly) losing oil pressure somehow. First I would replace it. If the pesky thing comes back on, - and now you'll have a good reason to watch your videos back to back - 🧐, you can always look further into the matter, 2nd guess would be oil pump. Last thing you want is a blown engine on your hands after all the work you put into the car recently. Other than that the car is mint! I watched your last Instagram video and the car sounds absolutely amazing! Great work!

  • @TJS36

    @TJS36

    2 жыл бұрын

    @@SuperWhiteBarry Thanks a lot, I have a basic tune for the manifold/exhaust and rev limiter raise, didn’t dyno it yet. I’ll fill up the oil a bit above max and see what the oil pressure does maybe we more oil in the system it’s less likely to drop

  • @SuperWhiteBarry

    @SuperWhiteBarry

    2 жыл бұрын

    @@TJS36 Please don't fill it up above max, NEVER do that, it is also potentially disastrous for your engine. Too much lubricant in the system can cause pressure on the crankshaft to increase. Overflowing engine oil can also lead to bent engine rods and collapsed valve pipes. You don't wanna go there! Check your oil pressure switch first, they are not that expensive, after-market around €25-€30, OEM (my preference) twice as much is my assumption.. 2nd option is the oil pump. Maybe you can consider joining "bimmerforums", a shitload of info regarding BMW's. If the KZread community has your preference, there's a German guy who was an IT consultant and switched to full-time BMW maintenance/restoration and has a KZread channel: "M539 Restorations". His channel is a real gem. I don't know how accessible he is, but he seems a genuine, easygoing person (don't know him personally, just watching his videos), maybe he knows somebody in the BMW community in your area or in Germany that can help you sort the engine out if you can not manage yourself. I think a lot of people would be glad to help you out with your project. His email is in the "about" section of the youtube channel. Good luck!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Dude I love M539 his videos haha. I’ll switch the oil pressure switch and if that doesn’t fix the issue I’ll probably go with a baffled oil pan as you see the pressure drop in the corners. Thanks again for pointing this problem out

  • @Nabihbik
    @Nabihbik2 жыл бұрын

    Hello professionals. I want to buy a BMW E36 and I want to develop it for racing and I want to know what is best for handling and drifting is it a sedan or a coupe

  • @mohamedliher2670
    @mohamedliher26702 жыл бұрын

    😈🏁💪💪💪🏁💯🎶❤

  • @TJS36

    @TJS36

    2 жыл бұрын

    😎😎😎

  • @becomematrix
    @becomematrix2 жыл бұрын

    Spa? Klinkt goed die 2.8

  • @SuperWhiteBarry

    @SuperWhiteBarry

    2 жыл бұрын

    Zolder!

  • @TJS36

    @TJS36

    2 жыл бұрын

    Zolder inderdaad, 2.8 loopt ook een stuk harder

  • @theterminfrator
    @theterminfrator2 жыл бұрын

    Heb de laatste tijd ook al wat ve halen gehoord van mensen die naar de ring rijden en geen leuke ervaring hadden met politie, auto's in beslag bv. Ik heb al wat tüv papieren liggen afdrukken in de hoop toch iet of wat in orde te zijn moest ik pech hebben

  • @TJS36

    @TJS36

    2 жыл бұрын

    Enige waar ze je echt op kunnen pakken is uitlaat. Als je dat in orde hebt kunnen ze je weinig maken

  • @theterminfrator

    @theterminfrator

    2 жыл бұрын

    @@TJS36 heb een eisenmann einddemper met tuv certificaat, en middendemper delete dus dat zou normaal geen probleem mogen zijn, cats steken nog

  • @Stesch77
    @Stesch772 жыл бұрын

    Warum schaltest du immer so früh?

  • @TJS36

    @TJS36

    2 жыл бұрын

    First time on track with a fresh engine, better take it careful first haha

  • @Stesch77

    @Stesch77

    2 жыл бұрын

    @@TJS36 Ahh, ok. Das verstehe ich.👍🏻

  • @CrazyE32
    @CrazyE322 жыл бұрын

    Wen turbo?

  • @TJS36

    @TJS36

    2 жыл бұрын

    Probably never, I am a big fan of N/A power

Келесі