Sounds brutal !

Sounds amazing

Sounds great! Now I gotta come here it in person again.

@BoostKingMatt

11 ай бұрын

Yes you do! We had a blast last time!

That actually sounds nice

I think it sounds pretty freakin cool

It does sound very good!

Sounds good

Your set up is the best sounding exhaust on a 2.7EB That I've heard, It sounds similar to an Infiniti G35/37. All of the other exhaust systems for the 2.7 sound like hammered dog crap; The 2.7 is a an engine with a Terrible exhaust note to begin with. In this case your hard work paid off, well done!

Yea I’m an ecoboost owner but damn do I hate one with exhaust. Welcome to the tuner scene

Sounds badass , reminds me of a gtr

Sounds like the most bad ass Stihl weedeater.

I have to do something like this for my edge st

That’s bad ass😅

I didn't make mention of it the other day but my main concern about the placement of the loop is that it seems like it would have to put more heat on the control module on the side of the transmission. It does sound fantastic, pretty much just like the trombone 3.5s. That is why I want to do it when I can.

@BoostKingMatt

11 ай бұрын

Yeah. I should wrap it with exhaust wrap.

@lil2.74

11 ай бұрын

@@BoostKingMatt I was thinking the same thing, that should keep the heat down.

@BoostKingMatt

11 ай бұрын

@@lil2.74 speaking of heat, I want to get a water/meth kit, but not tune for it, just run it as an intake cooling effect only.

@lil2.74

11 ай бұрын

@BoostKingMatt Ya that is in my plans too. I actually considered that before the turbos but the fact that my turbos are surely nearing thier end with the high miles, if I am going to the change, might as well do it right. Its insane hot here, going to hit 104-105 this week and thats without heat index. Sitting in traffic, long periods of idling I have seen charge air temps reach 180s. No intercooler can overcome that. Water meth would help that but if I did do it I would not be running it continuously, I would have it set up to kick in at a certain boost. I drive alot as you know, that would probably get costly using at all times. In a case such as your truck, makes perfect sense especially on track days. Some people don't understand how differently heat effects a turbo vehicle vs naturally aspirated. A naturally aspirated vehicle sucks already hot air through a short tube rapidly, if the tube and intake is super hot, the charge air doesn't have nearly as much time to be heated up even more. Our trucks have probably 10 or 12 feet of tubing under the hood and that tubing is hot, plus traveling through hot turbos. That is astronomically more time for the air to be heated up before it goes into the combustion chamber. The only way to combat that is either a complete, long cool down before making a pass or a long drive keeping continuous air flowing through the tubing keeping the tubing from becoming so hot. Neither is feasible and one is impossible on track day. Water meth is basically the only solution for our trucks.

@BoostKingMatt

11 ай бұрын

@@lil2.74 yeah. I will run it like you’re saying, having it kick in at a certain boost level. But not tune for it (in other words, increase timing, I would want to leave timing normal that way if it fails, the engine doesn’t grenade)

I hope they make one for my ford fusion sport

I’m glad your happy with the sound, I wish someone would make an exhaust for the 2.7 that sounded like a V8, I’m old and just a V8 guy with a 2.7.

@BoostKingMatt

9 ай бұрын

I hear you. Pretty hard to do that. V6 will always sound like a v6.

@BoostKingMatt

8 ай бұрын

@@ril850 that’s your opinion. Most everyone else disagrees

@user-rp3ev5kz2o

5 ай бұрын

Another pissed off chainsaw.

@BoostKingMatt

5 ай бұрын

@user-rp3ev5kz2o maybe, but it is faster than most anything in its class on the road.

What exhaust is on here and a bov or no

Should go with an SPD exhaust...

Sounds like a damn GTR.

How can I get one

Interesting set up! What traction bars do you have?

@BoostKingMatt

9 ай бұрын

I have the VAS traction bars

The same principle can be accomplished with the trombone mid pipe and removing the y pipe from the downpipe which has been in my plans but not in the near future. I really like how it sounds on the 3.5 trucks. Makes it sound more like the Ford GT.

@BoostKingMatt

11 ай бұрын

Oh yeah for sure. Keeping the y pipe is the most cost effective means however.

@208Concepts

11 ай бұрын

My comment isn't showing for some reason 🤔

@BoostKingMatt

11 ай бұрын

That’s weird

Kind of reminds me of a Formula 1 car sound!

All of these "muh V8" guys forget that one of Fords most popupar engines was an inline 6 🤣

Tell ppl to put their headphones on it actually sounds ok

@BoostKingMatt

9 ай бұрын

Haha

Sounds like an angry Honda

Are they going to continue to make these? Sounds great.

@BoostKingMatt

10 ай бұрын

He might. Maybe per people’s request.

@itsguyblack5548

9 ай бұрын

Definitely interested too id like to mess around with those down pipes and an axle dump lol

@BoostKingMatt

9 ай бұрын

@@itsguyblack5548 hit him up. His KZread is 208Concepts

@rendiewmit86

9 ай бұрын

@@itsguyblack5548 he has a Facebook page too. I contacted him through messenger.

@208Concepts

8 ай бұрын

How did I miss this? 🤣 I'm not making them en mass because they're a pain in the butt, but I can do it.

It sounds like a V6 Mustang

Pissed off mosquito 😊

Equal length but no longer equal resistance

I'm sorry but it doesn't sound like a truuck at all. If you close your eyes, people are going to see a beautiful truck driving down the road that sounds like a freaking Honda Civic. Mind you, not knocking the V6 engine as I have one in my Ram Rebel, but just put an excellent quality intake on it and you'll get your V8 sounds without the exhaust

@BoostKingMatt

8 ай бұрын

Ok, that’s your opinion. Thanks for the pointless comment.

@davegordon6943

4 ай бұрын

What kind of intake did you get

@jcallesano

4 ай бұрын

@davegordon6943 I think it injen. Not many companies make an intake for the RAM 3.6 V6. So it's slim pickings.

@davegordon6943

4 ай бұрын

@@jcallesano thanks man

@BoostKingMatt

4 ай бұрын

@davegordon6943 JLT

2 mufflers? Why

@BoostKingMatt

9 ай бұрын

Too loud with just the one haha

Sounds like my neighbors Ridgeline when the exhaust broke at the mid-pipe. Looks like you spent more money on clamps then a cheap inverter welder off Amazon.

Lol i live in the 208 area and drive a 2.7.. google knows

Ahh it's ok/not bad. But it does sound just like a "trom-boner" tho, every Infiniti with an exhaust, I call them tromboner cars

@BoostKingMatt

Ай бұрын

It’s never going to sound like a v8. So there’s no point in trying to make it sound like one. Gotta just embrace it, and acquire the taste for the Ecoboost sound. However this exhaust sounds like an Infiniti as opposed to a grand national or something.

This thing has more clamps than the tramp that works the corner near my house

@BoostKingMatt

9 ай бұрын

It does have a lot of clamps. But hey, it works!

@208Concepts

8 ай бұрын

Blame CVF for that 🤣

as long as it's stainless, nobody wants a rusty one

@BoostKingMatt

8 ай бұрын

Yeah. True. It’s stainless.

That sounds like a Miata w/ a fart-can & an automatic. 🤔

😢 the rasp🤮….. I recommend putting the longest 3” resonator mbrp makes to kills the rasp as much as possible and it will deepen the tone as well, The muffler isn’t needed. I’ve got the 3.5 with the mbrp res. and straight piped out back, under bridge full throttle is always a thrill. Props on the install. Idle sounds great.

@BoostKingMatt

9 ай бұрын

Thanks, but my favorite part of it is the rasp!!!

Think before you buy. If you know you’ll want an exhaust, buy a 5.0. This sounds like a small car, not a truck.

@BoostKingMatt

5 ай бұрын

Why buy something just for sound? Buy it for the fact that it wins races and shocks people

@MistrZIGZAG

4 ай бұрын

@@BoostKingMatt this makes no sense. If you bought a Coyote, and put the same amount of money in it, it would blow the 2.7 away… I agree it’s a good engine, but you don’t buy it strictly for performance; there are better options.

@BoostKingMatt

4 ай бұрын

@MistrZIGZAG I do not agree. 4000$ on turbos and a few other mods that yields 500 wheel horsepower would not do the same on a 5.0. You need a supercharger to make 500+ wheel. That’s about 10k. Plus, if I wanted a coyote I would have bought one. I didn’t want one. I like my twin turbo v6. Per liter, it makes more horsepower than a stock coyote engine could make per liter without blowing up.

@MistrZIGZAG

4 ай бұрын

@@BoostKingMatt here’s a forum post disproving your theory. “So my local speed shop has agreed to sponsor a single turbo build. He says it would be the only one in Florida or the states (which I seem hard to believe). I always thought that you install superchargers on domestics and turbos on imports. Well after doing some researching, my latter statement is as cliché as they come. From what others are telling me, Turbos are cleaner, safer, and able to provide much more power. The shop thinks a turbo setup on a 2011 5.0 would produce as much as 800hp. Whether that is single or dual setup I don't know, because I didn't give their statements much validity after the ridiculous 800 number. However, after reading more on Mustangs and Turbos, I think the number may be obtainable (in some way). The shop said my out of pocket expense would be less than $4000 out the door. This would include turbo, intercooler, headers, full exhaust, and labor. They think the best spot for the single turbo would be where the cool air induction is.”

Congrats… it sounds like a v6 mustang now…

@chaps2k100

9 ай бұрын

Lmao😂

@perosity

8 ай бұрын

Savage

@corywladyka1995

8 ай бұрын

Not a v8 man….

@jakethesk8roberts763

8 ай бұрын

😂bruh I’m dead

@ooozooo7333

5 ай бұрын

Wow, almost like it IS a V6 in general. Pointless comment.

That loop looks terrible. Your 208 guy should have made that loop using multiple pie cuts to create a smooth radius. The loop you got has a sharp point to it. And bro, it sounds like a clapped out V6 Mustang with a glasspack muffler. And soooooooo many clamps. Wow.

@BoostKingMatt

9 ай бұрын

Wow. Pretty negative Nancy. I will remove this comment if you don’t have anything encouraging to say.

@208Concepts

8 ай бұрын

While pie cuts would look smoother, it takes 10x longer to do. The pinch in the middle there is because I had to cut it and move it a second time. I would like to have a set of stock downpipes to make a jig and get it just right, but Matt is 12 hours south of me and this was all done from measurements over the internet.

really???? i dont think there is anything that can be done with any of the ford 6 cylinders to make them sound good. buy a real truck with a real engine like the 5.0 coyote

@BoostKingMatt

9 ай бұрын

That’s your opinion, and you’re entitled to your opinion. But a lot of other people would disagree. A “real” truck? Is mine fake or something? And what’s funny about the 5.0 is my truck is much much faster than a 5.0.

@seacradev5400

8 ай бұрын

😂 and so does my 3.5 Ecoboost, it can eat 5.0s all day.

Sounds like a cry for help. “Give me a loud one” The v6 ought to be quiet, especially if it pumps out near 500hp. Pissed off weed eater.

@RW-zh7kl

Ай бұрын

I have an Ecoboost and like it, but I think they sound like small airplanes

@BoostKingMatt

Ай бұрын

@RW-zh7kl So what

@Hema1400

Ай бұрын

@RW-zh7kl you ever see a small airplane pull a dually out of the ditch?