THE ECOBOOST MOTOR IS IN
Автокөліктер мен көлік құралдары
Got the motor in and started plumbing some things. Also mounted up the cup car pump and ran a bunch of lines. Excited to see it fit correctly and start finalizing some fab and items needed to make it run!
Big ups to BC Racing for bringing this awesome build to life!
Пікірлер: 85
Hell yeah getting closer hyped to see this beast drifting
This is a dream build. Cannot wait to see it rippin
Good job on the motor mounts Kellz!!🤙🤙 came out really good! Keep putting in the work brotha 💪💯🙏
Such an awesome unique build. Can't wait to see you rip it
I would make those front fenders in steel. You could then take moulds off them for infinite supply of spares. The shape looks like two stock metal ones could be cut up to get the well right. Crash protection in the 70'S was carrying a rubber in your wallet and a lap belt lol.
im so excited to see where this build goes. There are a few foxbody guys with an ecoboost swap around, but none of them will be drifting like this will!
Is he talking about the drift week that happened like a couple months ago? Lol. Either way stoked to see how this thing is shredded
@chelseadenofa
3 жыл бұрын
Yea… I’m slow to get these up
@trevormckeehen2010
3 жыл бұрын
Yea I laughed when he said “if you see this and drift week’s already started…”
Absolutely dope!
Need more build videos. Digging the content
I know you said you go through a lot of fiberglass but the Maier kit can be bought with the wheel well moved forward to account for how most of the angle kits move the wheel forward
You've validated my fan shroud philosophy I've always been told is wrong. Lol
Great vids
There's bolt on overs you can get. Matt Farah had a set on his car. It comes as a front and rear kit but the front and rear are the same IIRC.
Are your caster camber plates under the shock tower instead of on top? I cut my wheel well and move it forward 2 inches and just filled the gap in the rear.
The fox is gonna be sick. Cant wait to see it tandem with the Fun-Haver fox. I probably should have went ecoboost swap for my T-bird, for my wallets sake. A Barra can get expensive quick.
What if you cut the fenders tight to the arch on the rear and further out up front, then swap the cutouts from side to side to move the wheel arch forward.
Dude no way I always wanted to ecoboost swap a fox body that’s sick your doing it
The sound of that engine is not great from the factory, agreed! A good selection of resonator/muffler type/intake manifold can change a lot tho! Could be raspy and tinny, or growly and burbly. I haven't heard a trumpety/VTEC/VR sound from one, but I bet it can be engineered. The 5.0 LX had the coolest dual tip exhaust imo from that era. They had the twin angle cut stainless 2.5in straight. The GT I thought looked dopey with the derp bumper and the turn downs. Dang that's gonna be a cool combo. Have you thought about doing an SVO style hood as a subtle nod?
Do you have suffrage connectors front to rear. I also ran a strut tower brace. Thats number one things back in the day
Was this supposed to be used in drift week 3? that's why you said it might be delayed :o
@chelseadenofa
3 жыл бұрын
Haha thats was the idea. But parts delays killed us
Had a foxbody for my first car the first the we did was to the entire car was chassis reinforcements they twist and bend so easily but they're so worth it!!
@rickybezjak9025
3 жыл бұрын
Watching this build is almost the exact thing I wanted to do to mine 😅
I could design a custom kit if you’d want, make this thing look pretty sick
@zachfreeze3964
3 жыл бұрын
My insta is derpy.design if you want to discuss it
Ya i call em death traps. I dont like driving it at high speeds. lol. Coming along. Cant wait to see this baby rip.
Eco boost....motor build 👍....Mk 1 escort ,yes...
Chelsea ive seen fan shrouds fabricated with holes and rubber flaps to solve the air flow whilst moving issue
@chelseadenofa
3 жыл бұрын
Yea for sure. All OEM cars have them as well. I do have another fan for the car that will work much better but these little things blow a real world 2500cfm
Don't know if you have mentioned before but what K member are you using. I know some K's make the wheels sit forward like that and others dont. Just a thought.
@chelseadenofa
3 жыл бұрын
QA1 with the arms moved forward.
Wil the zf adapter be available to the public??
Cant wait to see you kill it at Englishtown!
❤️
Good luck in rd 3.
Around 9:00 you said you were hoping to offer a plug'n'play solution with a base map. I was wondering if anything ever came of that? Thanks!
My sn95 felt like that until i got a watts kit on the rear end and weld in subframe connectors.
🤘🤙🏼
🤙🤙🤙
Please use a fan shroud if you are worried about heat, it makes the fan 2-3x more efficient. If you are really concerned about the fan blocking airflow you can make holes with flaps in the shroud that open with enough air speed.
@chelseadenofa
3 жыл бұрын
While I do agree about the shroud and I run fully shrouded fans that are engineered for drifting on most of my cars. I put one of these fans on one of our school cars just like this and it worked unreal well. So I’m debunking stuff and trying things.
@awesomecooly123
3 жыл бұрын
@@chelseadenofa In my personal experience i had unshrouded fans on my car and it would overheat at curisng speeds 30-50 but I put a shroud on it as well as big fans and it works amazing. It has the pass through holes as well. But It is a miata and the kit is from flyin miata so it's a tested kit, I can't say the same for a mustang and a diy shroud but just my 2 cents, I'm sure you'll figure out what's best.
Now days that is a hell of an option for a swap into anything!!!
I wanna drop one in a 94 ford ranger lol 🤙🤙
Maier Racing has Fox overfenders. Not cheap though.. Glad to see she's coming along. Looove the build! www.maierracing.com/shop/fiberglass/individual-parts/79-93-mustang/
Type of motor is that that you're putting in there and what year is it from?
@fzR-up2uu
3 жыл бұрын
2017ish ecoboost
@chelseadenofa
3 жыл бұрын
2017 ecoboost
@kindsoulkinghayden6614
3 жыл бұрын
Thank you for responding so quick Chelsea denofa I would love to have you as a networking contact if possible? Please contact me KindSoulKing@yahoo.com or I can give you me cell # I'm one of you biggest fans !!!!
I've no idea how to build a car but i'm sitting here nodding all the way through
@LFshlevin
3 жыл бұрын
cringe asf
its almost time for a swap on my e36... eco36 maybe
Wen it comes to the front and the rear in a mustang it’s a love hate relationship some days the rear wants to do wat ever it wants and others it listens to the front end lol
A) love this project, it's so cool B) why not run the same body kit as Vaughn's foxbody
@tstuff1213
3 жыл бұрын
Vaughnss Foxboddy is a Hatch so there is different dimensions that might mess up the body kit. Also Vaughns car was built over 6 years ago the body kit might not even be in production anymore unfortunately which could be why he hasn't fixed the body damage from over the years.
@olajimimark
3 жыл бұрын
Why does he have to built it like Vaughn's??? He can do whatever he wants
@chelseadenofa
3 жыл бұрын
Those are just flares
@chelseadenofa
3 жыл бұрын
Also his wheel isn’t moved forward a ton
Any chance you will compete in Clutch Kickers with this car?
@chelseadenofa
3 жыл бұрын
Might be a plan
What type of ecoboost engine is this?
@chelseadenofa
2 жыл бұрын
2.3
you got your silver button yet
You could just section and slide the whole fender opening forward
@chelseadenofa
3 жыл бұрын
Yea. But I’d have to do that to at minimum 3 pairs. Which IMO the best way to do it is using part of another fender.
@NoClassic
3 жыл бұрын
@@chelseadenofa True. Maybe a good technique for making a master should someone decide to mold it and make a few out of glass.
Put Japanese hotboi overfenders,sideskirts,front and rear bumper or custom the bn sports s13 bodykit to fit on it
@chelseadenofa
3 жыл бұрын
I like cars without aero to destroy. Stock style is best for me, but obviously it’s not as cool
@emanh4keem_san420
3 жыл бұрын
@@chelseadenofa reliability > style I get it
Please make good noises with that motor
Where are you getting this engine for $2000?
@chelseadenofa
3 жыл бұрын
I just bought one for 2350 last month. 130k miles 15’ mustang
@smilesperlitre4082
3 жыл бұрын
@@chelseadenofa Im in Canada and you got me looking for chassis and engines to start a build like this. So, sick
2k for an engine? I guess thats used right?
@chelseadenofa
3 жыл бұрын
Yes
It's a Ford it should have the Barra..
@chelseadenofa
3 жыл бұрын
Way too heavy. Way to tall. Way not the motor for this project
@mattman4181
3 жыл бұрын
@@chelseadenofa u chose a sweet engine with good power and plenty of parts. Coming from a jz RB kinda community it would be really cool to see the Barra shine. For reasons u mentioned is probably why we haven't seen it.
@DriftJesus
3 жыл бұрын
Barra is popular in places where you can get lots of parts off a junkyard. That is not America.
WHERE ARE DEY 2 GRAND?!!
@chelseadenofa
3 жыл бұрын
I bought one from a salvage yard for $2200
Hit up @jon Duncan he can get you overs
Chelsea will punch a takeover kid in the face for every like on the video!