THE EASY WAY TO CUT EXHAUST & INSTALL OR REPLACE CATALYTIC CONVERTER
Автокөліктер мен көлік құралдары
Here’s a how to on cutting exhaust pipe to install a new catalytic converter on a diesel pickup so I can pass emissions here in Arizona, I’ll show you how to use the exhaust pipe cutter and how to install a new universal cat on your vehicle for the 2019 year emissions laws in Arizona and btw it passed with no problem, the tool I rented was pretty dull so with a new exhaust pipe cutter it should go pretty quick for you. Ask any questions if you have any and thanks for watching! Always wear safety glasses!
Thought I'd jump on KZread and show ya how to cut exhaust pipe with and exhaust pipe cutter and install or replace catalytic converter on your own vehicle, the exhaust pipe cutting tool is a must have if you are going to replace or install a catalytic converter on your vehicle, I rented my exhaust pipe cutter from the local big chain auto parts store.
Here is a link to the tool if you need to order one from amazon!
www.amazon.com/OEMTOOLS-27045...
Tags - Exhaust, Exhaust Pipe, Exhaust Pipe Cutter, Catalytic Converter, Cat, Muffler, Pipe Cutter, Exhaust Cutter, Oxygen Sensor, Replacement, Install, Replace, Installation, O2 Sensor
Пікірлер: 196
Those invisible safety glasses are definitely outta this world😂 Thanks for the video tho
@Azkeyguy
4 жыл бұрын
Haha thanks man appreciate it!
@Azkeyguy
3 жыл бұрын
Word homie we’re doin it the old fashioned way!! Works well for people without a sawzall, I did it this way because of the space restrictions and I wanted to have a somewhat straight cut! Thanks for watching!!!
@Azkeyguy
3 жыл бұрын
Good to know, most relationships are built on trust I hear!
Finally someone posting a clip showing that it isn’t just a 15second job while using these ,
This is exactly what I needed to watch keep up the good work
@dylanmcgannon1966
5 жыл бұрын
?
Loved the video. Exactly what I was looking for and the cutters made it even better. ❤❤❤
@Azkeyguy
Жыл бұрын
Heck ya I’m glad it helped, appreciate you watching!
Safety first but where the glasses though?😂🤔 great tutorial very informative you did a good job explaining and showing it.
@davidnavarro5035
4 жыл бұрын
Always safety first Carmen 👍👌
@davidnavarro5035
4 жыл бұрын
Happy Forth of July 😀👍
@Azkeyguy
4 жыл бұрын
David Navarro happy 4th brother 🇺🇸🇺🇸🇺🇸
@davidnavarro5035
4 жыл бұрын
Happy Forth brotha
Good tip about that cutter. I was getting ready to rent a Sawzall for this. My main worry is getting a replacement cat that will fit between my O2 sensors and leave me room for clamping.
@Azkeyguy
2 жыл бұрын
For sure, ya I couldn’t get a straight cut with a sawzall and then it would have been banging up against the cab and jumpin all around, and ikr they never leave a guy enough room do they!! Thanks for watching!!
Thanks for showing me this! I know I can’t afford to go to a shop for this.
@Azkeyguy
2 жыл бұрын
Ya man for what they charge you can buy the part and the tool and still be wayyyy ahead, I think they wanted like over 300 bucks for this, no way!! Thanks for watching man!!
Thank you for your video.. you are so awesome.
@Azkeyguy
3 жыл бұрын
Thank you for watching! Hope it helped!! Take care!!
4 years ago…he’s still cutting that exhaust pipe
@Azkeyguy
10 ай бұрын
I'm just about through it!
Great job pal
@Azkeyguy
4 жыл бұрын
Thanks I appreciate it!
Was still getting leakage around the clamp even tho it was clamped hard. Ended up using exhaust tape and putty, that it made leak proof.
@Azkeyguy
16 күн бұрын
If it works it works!!! Thanks for watching!
I used tthat ttool tthe otther day had to put on new flex pipe man my body still sore from using tthat on steel pipes
“don’t forget your safety glasses” says the guy who doesn’t even have them on 😭😂
@Azkeyguy
4 жыл бұрын
That’s how I found out they’re a good idea lol lots of debris
@ricgomez1
3 жыл бұрын
Gloves are another one that was forgotten, wait till he gets sliced be the sharp edge
@Azkeyguy
3 жыл бұрын
I like to live dangerously lol! But that is true I should have been wearing gloves and glasses, and probably a mask haha jk! Thanks for watching!!
@guesswhomartin9249
3 жыл бұрын
I like this guy. Who even follows safety to a T ? If you were to follow safety to a T, you'll never get any work done.
@jigc23
3 жыл бұрын
😂🤣💩
very good thank you so much.
@Azkeyguy
3 жыл бұрын
Thanks for watching appreciate you!
Glad I watched this, was thinking of buying a pipe cutter, think I will pass, and use a grinder
@Azkeyguy
3 жыл бұрын
For sure, it ain’t too bad but a grinder for sure makes quick work of it!
The best way I did that in a past… I got some zip ties made it taught real easy to cut .. You did good though
@Azkeyguy
2 жыл бұрын
Right on ya that is a great idea, never thought of using zip ties on it! Thanks for watching!
Is there a shear type tool that can be used for those? Or too big
I live in cali so i have to have CARB compliant catalytic converters . It costs 6000 dollars just for the catalytic converters if i buy direct fit . Im wondering if i could just buy cut and weld ones and do this and have it work the same way?
Good tuurtioral 👍💯
@Azkeyguy
3 жыл бұрын
Thanks bud appreciate you watching!!
Finally somebody actually showed how to do it from beginning to end
@Azkeyguy
3 жыл бұрын
Thanks for watching!!
Flange weld failed, in front of '06 Taurus Cat, n I tried the Maddux HF ver. I wasted HOURS w/this thing!!! It seemed to cut deep enuff, but it never got thru, and eventually stopped makin progress. Thinkin the pipe above my Cat's THICKER, and exceeds the capabilities of this type of cutter... 🙁
@Azkeyguy
Жыл бұрын
Ya it was probably two prizes you were trying to cut thru so super thick so the cutters probably bottomed out before they got thru the second piece, bummer!!
Does it work okay having the cat that far back?
I have to comment that you should change the name from "easy" to "neat and clean". I thought I was doing it wrong after 25 mins into the first cut and it was still not cut through until I realized you cut a large section of your time out. I have been single WAY too long to not have the grip strength to be able to do this if it were easy.....
@Azkeyguy
3 жыл бұрын
Hahaha oh shit man that made me laugh, gotta have gorilla grip on it ha, ya neat and clean may be better cuz I did work up a sweat!!
How is a sawzall more difficult?
I wanted you to start the vehicle up so I can hear how it sounded after the installation
@Azkeyguy
4 жыл бұрын
Oh man my bad I should have, never even thought about it, it sounded good tho lol
Wait, did he not weld the ends of the catalytic converter to the exhaust pipe?
@Azkeyguy
4 жыл бұрын
Taylor Hill no I used clamps so it can be removed after emissions inspection!! Thanks for watching!
good job but next time try a cut all saw and use ban clamps in case you have to remove it again for something and ban clamps seal better with no exhaust escaping
@Azkeyguy
4 жыл бұрын
390bear thanks for the comment, took it right back off after it passed emissions!!
Curious if you noticed a different smell in the exhaust with the cat on?
@Azkeyguy
Жыл бұрын
Not noticeably different, I mean diesel has such a overpowering smell (which I like lol) that I didn’t really notice a difference, but it probably did cut down on some of the fumes!
Good job save ttime n money I gott tthat same ttool from auto zone
@Azkeyguy
Жыл бұрын
For sure!! Thanks bro, definitely beats paying someone else to do it! Thanks for watching!!
@dariusstack
Жыл бұрын
@@Azkeyguy np n dam sure do it's already rough n on TTop of tthat we TTryna save every dollar after bills n rent paid
What level of noise does the exhaust make from air leakage with it not being welded?
@Azkeyguy
Жыл бұрын
With the exhaust clamps there was none I would have to say, it was 3 inch free flowing pipe so not much restriction, runs right through, but the diesel is so loud you couldn't hear it if there was noise, but it clamps down pretty good, I never noticed any extra noise coming at all
For sure no Sawzall but it angle grinder hell yes and where you goddamn safety glasses LOL!
@Azkeyguy
3 жыл бұрын
For sure the ol grinder always does the trick a lot faster!!! N I wore them during editing lol!!
cool tool! Cleaner than my sawzall!
@Azkeyguy
4 жыл бұрын
J Howard it worked awesome!! Thank you for watching!!!
Safety glasses 😀
@Azkeyguy
2 жыл бұрын
Just wait till the next video I learned my lesson haa
Hi what catalytic converter are you using? I bought an 2003 gmc sierra. Didn't notice converter was removed.
@Azkeyguy
4 жыл бұрын
3" Inlet/Outlet Catalytic... www.amazon.com/dp/B071VDZBW1?ref=ppx_pop_mob_ap_share
@Azkeyguy
4 жыл бұрын
This is the one I got , it’s just a universal, mine had 3 inch exhaust tho yours might be 2 1/2 or 2 3/4 inch
Did it pass when they hooked it up for emissions and visual?
@Azkeyguy
Жыл бұрын
Yep it passed with flying colors!!
Nice invisible safety glasses
@Azkeyguy
4 жыл бұрын
Darryl Johnson they really do wonders ha!!
It should be a clamp lock on that cutter instead of you having to hold the pressure
@Azkeyguy
4 жыл бұрын
Ya the ones with the clamp lock are nice!
@NjoyMoney
Жыл бұрын
You can use zip ties
why didnt you use a sawzall
What is the part number of the catalytic converter?
@Azkeyguy
4 жыл бұрын
3" Inlet/Outlet Catalytic... www.amazon.com/dp/B071VDZBW1?ref=ppx_pop_mob_ap_share
What is the gas direction trough it? is it arrowed?
@Azkeyguy
Жыл бұрын
Yep there is an arrow on the cat to show which way the airflow goes! Thanks for watching!!
@cipriansofineti346
Жыл бұрын
@@Azkeyguy Please, what product code is the catalyst ?
@Azkeyguy
Жыл бұрын
@@cipriansofineti346 3" Inlet/Outlet Catalytic... www.amazon.com/dp/B071VDZBW1?ref=ppx_pop_mob_ap_share
sawzall with heavy metal cutting blade 5 seconds done
@Azkeyguy
Жыл бұрын
Yep that works too!
Woulda been easier to pull that straight pipe out by removing clamps then take to a work table cut piece of pipe out clamp converter and replace as a whole then clamp back on instead of being on your back the whole time
@Azkeyguy
3 жыл бұрын
That’s a possibility
@ABC-td4rg
2 жыл бұрын
Maybe not.... The long pipe would be unweildly and difficult to hold still.... Under car has it held in place by the hangers and mounts?
@ABC-td4rg
2 жыл бұрын
Mark straight line with a piece of notebook paper wrapped around pipe.
@Azkeyguy
2 жыл бұрын
Dang I never thought about this, but that would have given me a perfect line, I'll have to remember that next time
👍🏾👍🏾👍🏾
@Azkeyguy
2 жыл бұрын
🔥🔥🔥
Do as I say, not as I do
@roblesenterprises2465
4 жыл бұрын
Rule to live by....😅😉😎
O2 sensor?
@jayboogie401
5 жыл бұрын
Ok never mind
@Azkeyguy
5 жыл бұрын
Yep never needed one for the diesel, some catalytic converters will come with an 02 bung already welded in, thanks for watching!
Dude a grinder and cut of wheel from harbor freight is ten bucks and would have saved you so much time and effort 😂
@Azkeyguy
3 жыл бұрын
I know I like doin things the hard way ha
What is the quality of the catalyst please?
@Azkeyguy
2 жыл бұрын
Oh man idk honestly, I just got the cheapest one I could find so it would pass emissions
Cant use it on a ford F 150
@Azkeyguy
2 жыл бұрын
Didn’t it fit the f150?
I’m definitely not knocking your method but you you have got done a lot faster and easier if you would have used a cutting lubricant and the real key is to start slow and don’t squeeze so hard everyone wants to do it as fast as a sawzall just let the blades do their job
@Azkeyguy
Жыл бұрын
For sure a little lube never hurts right, yep that’s right it’s like cutting bread gotta let the blade do the work so you don’t smash the bread!! Thanks for watching and commenting bro!!
U breaking pipe cutter how bro
@Azkeyguy
2 жыл бұрын
Too much sauce lol
I would do the exact opposite, cut out the cat and straight pipe it. Perks of living in Florida
@Azkeyguy
4 жыл бұрын
Bryant Partazana I actually cut the cat and resonator off and had it straight piped, but had to put a cat in there quick to pass emissions in Arizona, but trust me it came back out lol!!
@marianomiranda6852
4 жыл бұрын
Do you guys experience increased fuel consumption after removing the cat
@Azkeyguy
4 жыл бұрын
Nope it actually get better mpg because it flows better!!! Thanks for watching and commenting
why would you fit one if it was made without one.
@Azkeyguy
3 жыл бұрын
It had one originally and I took it off, had to put one back on to pass emissions
This video has a few good points but lacks the "completeness" of a real end-to-end job. He admits that he is just half-assing it to pass inspection. Still, I liked it for what it is, and it doesn't take 30 mins.
@Azkeyguy
Жыл бұрын
For sure, it’s one of the first videos I did and I always think about what I should have said or done after I review it before posting, but then it’s too late cuz the pipe was cut already lol, only get one shot haha, but I appreciate the feedback, thanks for the compliment on the end, and I’ll keep it in mind for the next one!! Thanks for watching bro!
It would of been a lot quicker to just get the grinder out! LOL
@Azkeyguy
4 жыл бұрын
Russell Smith hell ya bro I thought about it!!
How to welder????
@Azkeyguy
4 жыл бұрын
With a welder
Ok forget the glasses... what kind of car,truck or SUV is this🤔 and why you have to add this catalyst converter?
@Azkeyguy
3 жыл бұрын
This was on a 97 Dodge Ram with a Cummins, I needed to put it on so it would pass emissions, thanks for watching!!
But where was the location of the original cat?
@Azkeyguy
Жыл бұрын
Right about where I put the new cat in, it was what they call a resonator/ cat combo, there were hanger locations in that location, some newer cars have them closer to the engine in tight spaces
A sawzall cuts it out in 5 minutes
How much was tool
@Azkeyguy
3 жыл бұрын
I rented it from the parts store I think it was like $40 or $50 to rent, but you get the money back when you take the tool back
1:26 1:33, "That's what she said"
@Azkeyguy
4 жыл бұрын
Raymond Ray lmfao!!!!
They passed it visually with it just clamped on? Fkr's just nailed me on it too. Pass the damn snap test, runs clean... but no cat so it failed. Bullshit.
@Azkeyguy
3 жыл бұрын
Yep visual pass with it clamped on and the snap test(yes which is bullshit) hold your vehicle to the rev limiter wtf
@Azkeyguy
3 жыл бұрын
Never had to do emissions is South Dakota; I think it’s a crock of shit diesels put out less emissions than a gas
Will this cut catalytic converters?
@Azkeyguy
2 жыл бұрын
Only for legal reasons yes lol
@MrDon967
2 жыл бұрын
@@Azkeyguy hehe ofcoz 100% :D
@Azkeyguy
Жыл бұрын
Haha lol thanks for watching!!
@MrDon967
Жыл бұрын
@@Azkeyguy aye bro turns out it wasn't the cat causing the issue :D which i'm glad considering cat prices rn :D
@Azkeyguy
Жыл бұрын
Nice man, ya I know they are crazy expensive! I can see why people jack em lol
Did it pass
@Azkeyguy
3 жыл бұрын
It sure did! I was nervous but she did
“The easy way” lmao
@Azkeyguy
2 жыл бұрын
Easy peasy lol
Thank you so f*cking much
@Azkeyguy
2 жыл бұрын
For sure bro any time, thanks for watching
Sawzall would've been a lot quicker and easier Walmart got some cheap ones and metal cutting a blades thats just me
@Azkeyguy
2 жыл бұрын
Definitely works too! Thanks for watching!
That cutting tool he's using, is horrible. The one I rented was dull so I bought a cheap saw at Harbor Freight to cut the pipe instead. It was worth the $20 for sure.
@Azkeyguy
2 жыл бұрын
Ya it was a pile, it broke once on me and had to get a different loaner, ya I shoulda just went to harbor freight lol, thanks for watching!!
The long and hard way to cut an exhaust.
@Azkeyguy
3 жыл бұрын
Lol right, but it did keep the cut straight, I can’t cut a straight line with a sawzall!! Thanks for watching!!
I was told by a mechanic that I can not just change my cat.. then I was told I have a couple of cats. I asked how do you know which cat to change. He said just change both of them. Somebody please tell me the truth somebody. Oh… 2007 Jeep Grand Cherokee 4.0
@Azkeyguy
2 жыл бұрын
Well depending on the positioning of the cats. The universal ones might not be the best fit, and yes they are really expensive, but a good mechanic should be able to pin down the one that isn't working properly by what the 02 sensors are saying. Are you getting 02 sensors codes or what's the reason he wants you to change them? Mechanics like to lie to lady's since they aren't as well versed on vehicles, but good on your for doing your own research! How come they need to be changed?
@gailglady795
2 жыл бұрын
@@Azkeyguy p0402 code.
@gailglady795
2 жыл бұрын
@@Azkeyguy Thanh you for responding to my question.
@Azkeyguy
2 жыл бұрын
@@gailglady795 sorry for the late response, that code is a code for the EGR valve, exhaust gas recirculation, which shouldn't affect the cats, and the egr valve may just be getting plugged, which without being with the vehicle it's hard for me to diagnose it, but another thing is your cats are worth alot of money, so maybe they want to replace your cats thinking you'll leave the old ones there, and they can get a couple hundred dollars scrap price for the precious metals, platinum and others, in the catalytic converter, so I would definitely get another opinion! And if you do end up having to change your cats, definitely keep them and take them to the scrap yard or call a scrap guy from Facebook because they are worth quite a bit. Ya something sounds fishy to me
@gailglady795
2 жыл бұрын
@@Azkeyguy Thank you so very much!
In the voice of fire marshal bill.....Remember I am a fire marshal
@Azkeyguy
Жыл бұрын
Indeed, indeed, thanks for watching!
i see, this is how my cat was stolen....
@Azkeyguy
Жыл бұрын
They are quick!!!
Lolz you obviously ended up using a saw or angle grinder don't you realize you weren't going to make the cut that way...😆😆😆
@Azkeyguy
Жыл бұрын
Nah man it took a minute but I don’t quit, motivation and dedication!!
Don't forget your safty glasses? This guy has none????
@Azkeyguy
4 жыл бұрын
Bro I couldn’t find em but I recommend wearing them regardless lol!! Thanks for watching tho!!
You really think you should be talking about safety to the rest of us? Lol 1-7-20
@Azkeyguy
4 жыл бұрын
Just a side note!!
Good video but chewing gum was so annoying that wet spit noise gross
Its funny how americans think its funny to not use protection gear. "hahaha my eyes are in danger, so much fun!" 😆
That don’t look easy at all 🤷🏼♂️🤷🏼♂️😂😂
@Azkeyguy
4 жыл бұрын
Only about 3-5 minutes to get through the pipe
Lol screw that noise just break out the old reciprocating saw.
@Azkeyguy
4 жыл бұрын
I woulda, just have a hard time making a straight line lol my luck it would be crooked af
@chrisao1987
4 жыл бұрын
@@Azkeyguy lol
that's ugly just have some shop weld it for you pay 50 bucks to a pro
@Azkeyguy
4 жыл бұрын
Thanks bud, I actually made it to be removed again after emissions!
@josechavez979
3 жыл бұрын
Or save 50$ and use the clamps haha
@Azkeyguy
3 жыл бұрын
Right!!! Who’s crawling on the ground to see how nice the exhaust looks anyways wtf?!?!?
“So yeah”, you have zero comedic value...