The Easiest Way to Install Window Casing and Trim
Тәжірибелік нұсқаулар және стиль
All of our Gear can be found on our Amazon Storefront.
www.amazon.com...
There is no extra cost, we just get a small percentage of purchases.
Jamaica Cottage Shop Quality Outbuilding Kits
jamaicacottage...
We do receive a small amount of commission from your purchase but it does not cost you any extra.
I just thought I would make a video on how I cased our windows and trimmed them out, this is about as simple as it gets. This could be a good method for you aren't sure you want to do it yourself.
Let’s connect:
Instagram - break_free_homestead
Пікірлер: 73
This was just what we needed thank you so much and great job. We needed simple and you delivered. Not a bunch of lingo we didn't understand or complicated angles or cuts.
Thank you for keeping it simple an getting right to the point. I was engaged the whole time. I really appreciate it.
This really helped. I am a new homeowner and beginner at everything. Had new windows installed and one of them had no trim and need to do myself. I have all the tools. Just want to keep it simple. Thank you.
Exactly what I needed for both of my new kitchen windows. I like the simplicity of this. Thank you so much oh and I’m not the best at measuring so this helped me a great deal🙌🏼
No "Fancy Nancy" here! Thanks for the video easy install and they look great!
Just what I needed! I think I can do it by myself!
Very helpful. Now I’m not afraid to trim but more importantly you taught me how to use my nail gun.
Thanks for the tips! Looking to do almost exactly the same style of jam and trim! Good Simple video...
Not bad , looks a lot better than just sheet rock return. I always build a window stool makes for a lot fancier looking job. Next time if you're going to trim your windows that way cut everything to fit fasten it all together ( prefab it ) then just place them in the window and nail your trim to the wall. If you have several windows it will save you some time. Good luck and well done job
Perfect that’s all I need ❤my first time but looks simple enough
@BreakFreeHomestead
11 ай бұрын
You got this! 💪
Nice and simple, this is definitely gonna help when I do my windows
Very helpful. Will help.me tomorrow on my first trim window in our basement!!
Nice simple job. Regarding nailing the side trim pieces (around 5:04) I have seen some videos suggest that a small nail (like you used) is best for the inside (attaching the side face piece to the edge of the side leg of the casing) but a longer, thicker nail should be used on the outside of the trim where you are nailing through the trim piece and drywall into the stud underneath. Dunno if it makes much of a difference, just thought I'd mention it.
Nice man. Great video!
Good video. Very simple and straightforward. Thanks.
@chev2rcr900
3 ай бұрын
Also, no annoying loud music.
Excellent video, I have 6 matching windows to my self
Yep. Good video. Helps me get started.
Harbour Freight nailer! I got the same one, works very good and good price.
Very helpful, thanks, I'm going to try and case my windows, this help a lot
@BreakFreeHomestead
5 ай бұрын
Glad it helped, you got this 💪
Great jobs are very rewarding that somebody knows what the hell they're doing😊
awesome work
@BreakFreeHomestead
Ай бұрын
Thanks a lot!
I have 2 garage windows to case in....this will work.
@BreakFreeHomestead
4 ай бұрын
Perfect! You got this 🤘🤘🤘
If painting, prime those knots with an oil based primer or Shellack to keep the resin from bleeding through
You helped me big time. Thank you
Thank you for the instruction.
Sweet and simple. Thank you!
@BreakFreeHomestead
Жыл бұрын
You are so welcome!
This helped a lot. Thank you.
@BreakFreeHomestead
5 ай бұрын
Glad it helped!
You showed us how to nail in boards to the wall. Thanks
@BreakFreeHomestead
2 ай бұрын
Youre Welcome👀
Love it THANK YOU
Walk in closet installer for 8 years now, caulking saves my quantity over quality just kidding life
@BreakFreeHomestead
Жыл бұрын
When in doubt caulk it out 🤘🤘😂
Hi thank you very much simple I like it 😊
@BreakFreeHomestead
6 ай бұрын
Welcome!
Thank you for the video! I’m looking to trim out windows that are finished with drywall. Do I have to remove the drywall around the window, or can I nail the trim wood right over the drywall?
@BreakFreeHomestead
Ай бұрын
You could put it right over as long as you like the reveal on the window face.
@darrendicksonlds
Ай бұрын
@@BreakFreeHomestead I’m not sure what that means, but I’m going for it! I’ll let you know how it goes.
This was helpful.
Amazing video
@BreakFreeHomestead
Жыл бұрын
Thanks!
Awesome thank you!
@BreakFreeHomestead
5 ай бұрын
You're welcome!
Not sure what color you painted but hopefully you used a liberal few coats of shellac based primer over those knots. Knotty pine will bleed through everything.
You the case- master
@BreakFreeHomestead
7 ай бұрын
lol not quite but it works!
Great video! Thank you!!!
@BreakFreeHomestead
Жыл бұрын
Thanks so much for the support! 🤘🤘🤘
Very helpful! This is exactly what I plan to do to all of my poorly finished windows. Thanks for sharing.... 😀 Oh, are you using poplar or pine boards?
@BreakFreeHomestead
2 жыл бұрын
Thanks! These were just pine.
. . . . .how many acres is your homestead. . / / / / /
Can you do the same thing on the outside??
@BreakFreeHomestead
Ай бұрын
Yes for the trim, you would just most likely need the drip edge on top
I’m going to try this
@BreakFreeHomestead
Жыл бұрын
Lets Go! 💪
Caulked is the word not cocked
what lumber you using ?
@BreakFreeHomestead
5 ай бұрын
This was just pine
nice trick with the pry bar/ not shims
@BreakFreeHomestead
Жыл бұрын
Thanks Mike!
Good job .....
@BreakFreeHomestead
2 жыл бұрын
Thank you so much! 🤘🤘🤘
I always say KISD K EEP I T SIMPLE S TUPID 🤣🤣🤣BE CREATIVE IT'S ALL GOOD
Any suggestions?
@BreakFreeHomestead
Жыл бұрын
Just measure your sides plus 1/8th and put the 45 mitres on those lines. Then nail them up and measure the opening thats left. Or you could just build it before putting it up.
So I'm having a brain fart...I. trying to do this with a 45° cut