The Differences Between Ceramic and Glass Mini Fuses and Mini Fuse Basics
In today's video, we'll be going through the basics of ceramic and glass fuses.
➡️ We've got the three standard-sized fuses to show you, for both the glass and the ceramic fuses, ranging from the 3.6 by 10 millimeter to the 6 by 30 millimeter.
Most specifications for each fuse are stamped on the end caps and typically start with a T or an F. T stands for time-delay while the F means fast acting. This is followed by numbers which indicate the amperage value. Each fuse also carries a marking for breaking capacity, L and H: low breaking, and high breaking.
➡️ The final marking shows voltage rating and the average fuse is rated at 250 volts. Check out our website for our mini fuse stock!
Glass fuses: thefuseshop.co...
Ceramic fuses: thefuseshop.co...
💬 Did you know the differences between ceramic and glass mini fuses? Tell us all about it in the comments!
If you like this video, consider subscribing to TheFuseShop using this link! ⤵️
/ @thefuseshop3364
********************
Welcome to the official KZread channel of TheFuseShop!
Visit TheFuseShop website here:
thefuseshop.com/
Here at TheFuseShop, we have over 25 years’ worth of experience with fuses and our knowledge on the subject continues to expand.
We provide a service that surpasses the quality of any other in the industry. Our prices are matched by none and the quality of our products is of the highest standard.
So, if you are looking for a reliable and experienced company that provides affordable, high-quality fuses, with a fast response time, look no further.
TheFuseShop has exactly what you're looking for and much, much more!
Subscribe to our channel now!
********************
Connect with TheFuseShop on social media:
Facebook: / the-fuse-shop-10369957...
********************
#CeramicFuse #GlassFuse #TheFuseShop
Пікірлер: 23
Can I replace a 7A fuse with a 13A fuse?
@classicaudioadventures
7 ай бұрын
If your equipment calls for a 7A fuse to be used, then no. Never use a fuse with a greater current rating than what is specified by the manufacturer, otherwise it may not offer adequate protection against faults.
Boss saan po naka2bili mg fuse FU100
Hello Thanks again for your educational information. I have two devices which I want to protect against high voltage (220 V). The varistor should clamp at (150 V). 1st device: 120 Volts 550 Watts 2nd device: 120 Volts 2,500 Watts My question is: What's the right (MOV) size for each device? What's is the varistor's: Diameter Resistance Voltage Ampere. Thank you so much.
@thefuseshop3364
2 жыл бұрын
Hello, I have tried looking into this, but unfortunately we do not have the technical expertise to answer this question correctly and we do not want to give out false information! Sorry I was unable to help this time!
@salsal1967
2 жыл бұрын
@@thefuseshop3364 Thank you for your efforts and for your kind reply. 🙂
@akshaygaming1869
Жыл бұрын
@@salsal1967 1) 7D181K 2) 10D181K Or 201K Or 151K
@salsal1967
Жыл бұрын
@@akshaygaming1869 Thank you so much. ⚘️
@akshaygaming1869
Жыл бұрын
@@salsal1967 guess i answered a 8 month old question
Nice Video. One Question: I have a blown 3.6x10mm glass axial fuse that doesn't appear to have markings on it and I have another one that is not blown with no apparent markings. How do I know what replacement fuse to order?
@thefuseshop3364
Жыл бұрын
The Fuse markings should be on the silver cap at the end of the fuse. However it is important to replace a blown fuse with the exact same kind. Unfortunately if there are no markings, I would check with the manufacturer of the item, or the place that you bought it from!
Thank you for the informative information. Can I use a 250V 5.0 Aamps fuse to replace a 125V 5.0 Amps? .
@thefuseshop3364
2 жыл бұрын
Manar House, Yes you can do so! If you have any further questions, please don't hesitate to reach out to us through an email at: support@thefuseshop.com
@salsal1967
2 жыл бұрын
@@thefuseshop3364 Thank you so much for both, your reply and your email address. 😊
My multi-meter ceramic fuse has markings of 613 b "in a circle" 600mA 250Vc. What does this mean?
@thefuseshop3364
2 жыл бұрын
Hello, Unfortunately I do not have the technical expertise to accurately answer this question without being able to see the fuse. I do not want to give out false or misleading information that could possibly harm your appliance/you if the wrong kind of fuse is used. I apologize for this!
Sir my tv main bord fuse is ceramic as t6 3ah 250v fuse can I change another type fuse?
@thefuseshop3364
2 жыл бұрын
Hello, Thank you for your comment! I would highly not advise doing so. When changing your fuse, you want to replace it with the exact same kind, amperage, voltage, and size of fuse! Hope this helps!!!
But What's the difference between glass and ceramic fuses? Can I replace my blown ceramic fuse with a glass fuse?
@thefuseshop3364
2 жыл бұрын
Hello, Please view the differences between glass and ceramic fuses here: www.electrity.com/glass-vs-ceramic-fuse/#:~:text=The%20thermal%20stability%20of%20glass,avoid%20creating%20a%20conducting%20coating. But essentially only replace blown fuses with the same kind of fuses. So if you had a 5X20mm 15Amp ceramic fuse that blew, you would only want to replace it with a 5x20mm 15Amp ceramic fuse. And vice versa!
All fuses works only for one thing for not well calculation of the power supply grid😂
@stevenA44
4 ай бұрын
WHAT??? Your statement makes NO SENSE!