PLANS FOR ALL PROJECTS: www.spencleydesignco.com/store GRAB A SHIRT: rebrand.ly/d52ph5d SUPPORT THE SHOW: rebrand.ly/txql2ur

Walrus. This was too funny watching you try to use this “Play School” tool. Thanks for the video.

@SpencleyDesignCo

2 жыл бұрын

🤣 it was a struggle

Walrus - I would like to see a review of the little tools that you use, like finger boards, push blocks etc. and more importantly what the brands are and where to get them.

Walrus, I think the title should be, Don’t buy CHEAP tools on Amazon.

WALRUS - I would have straight up sent that tool back for plainly being a faulty and/or cheap battery, even though you bought it for testing.

@SpencleyDesignCo

2 жыл бұрын

Don't you worry, I returned it haha

Walrus - I bought an angle grinder from Harbor Freight and so far it seems to be do everything I needed done. On the other hand, I purchased one of there cheap HVLP spray guns and it is hit and miss on getting it to spray lacquer properly. Maybe you could test and kill a cheap HVLP spray gun from Amazon. I really enjoy your videos.

@SpencleyDesignCo

2 жыл бұрын

Thanks Michael! I’m growing my list of tools the test

Walrus - a jointer if u can find a cheap one!!!

@SpencleyDesignCo

2 жыл бұрын

that's a good idea!

Walrus I’d love for you to put a Harbor Freight router through its paces

@SpencleyDesignCo

2 жыл бұрын

That's definitely in the plans! Any specific tool?

Did you charge the batteries first?

@woodworkingandepoxy643

Жыл бұрын

Oh nevermind I saw the rest of it. Sounds like it's not meant to be pushed down on

WALRUS - I'd like to see a torture test if the cheap 12v drills with battery in the handle...e.g. cheapo Milwaukee ripoffs. Thanks!

@SpencleyDesignCo

2 жыл бұрын

Talking about the ones that look like the m12 drills?

@KitLake

2 жыл бұрын

@@SpencleyDesignCo Yep, exactly.

@SpencleyDesignCo

2 жыл бұрын

I’ll add it to the list

metabo has one for 40 bucks

Walrus - Cheap 12v drlls

@SpencleyDesignCo

2 жыл бұрын

that's a good idea!

Walrus - you definitely get what you pay for. I would rarely use an angle grinder myself. Hot batteries aren't a good thing, especially with fires. Maybe a cheap Dremel with a cutting wheel might work better for smaller cuts. You should torture test cheap cordless impact drills.

@SpencleyDesignCo

2 жыл бұрын

For sure! cordless drills/impacts are on my list!

@veganpotterthevegan

2 жыл бұрын

A cheap cutting wheel would be better then cutting with a cheap grinder which is made for...grinding🙃

@SpencleyDesignCo

2 жыл бұрын

Your face is upside down

Walrus! I think a real angle grinder torture test would be the cheap corded one from harbor freight. Or maybe torture test any one of the cheapest tools from harbor freight. I know some are good, but there are also some that are really bad.

@SpencleyDesignCo

2 жыл бұрын

I've definitely considered doing some harbor freight testing, but it seems like there are a lot of those videos out there

@ArpadBuildsThis

2 жыл бұрын

@@SpencleyDesignCo true that. I already love this series. I just want to see more torture tests.

@SpencleyDesignCo

2 жыл бұрын

Well so far it’s not looking good 🤣 it’s my worst performing video by a landslide

Walrus. HF has three levels of tools, but no one seems to test them. Would love to see them torture tested. Are they any good?

@SpencleyDesignCo

2 жыл бұрын

that would be an interesting one!

Sitting in an English garden Waiting for the sun If the sun don't come you get a tan From standing in the English rain I am the egg man (now good sir) They are the egg men (a poor man, made tame to fortune's blows) I am the walrus Goo goo g'joob, goo goo goo g'joob

Walrus can you review the Menards masterforce track saw?

@SpencleyDesignCo

2 жыл бұрын

Is that a cheap one?

@whizzywoodworks5011

2 жыл бұрын

I do believe it’s one of the cheapest on the market. It’s a whole kit for $200.

@SpencleyDesignCo

2 жыл бұрын

Not bad! I might have to check it out

Walrus I don’t think that tool would be worthwhile for anyone no matter how little someone uses it.

@SpencleyDesignCo

2 жыл бұрын

You’d have to be a really really really light user for it to be worth the money

Walrus, sad angle grinder. I would rather just use a standard corded grinder, as whenever I need mine, im rather close to an outlet and in my shop 12 dollar harbor freight corded one has been reasonable for me for a year

@SpencleyDesignCo

2 жыл бұрын

I had the same harbor freight one and it was MILES better than this 🤣

even in dewalt batteries have those thermal sensors, remove them and you get all the grind you want, but be prepared for the battery puff, those battery tools are not good for grind just for cut

@SpencleyDesignCo

2 жыл бұрын

They work way better than these cheap ones 🤣

@BettyMasterPain

2 жыл бұрын

@@SpencleyDesignCo Yes, those batteries are super cheap

@SpencleyDesignCo

2 жыл бұрын

I’m honestly shocked they didn’t melt

Жыл бұрын

Exactly the problem i encountered with my Bosch grinder. I have 3 4mah batteries and those get hot after use in my grinder. They sell 6mah too. But the terminal sensors are too sensitive calibrated. My next tools will be corded.

Walrus. Looks like it's acting like there's a short somewhere

@SpencleyDesignCo

2 жыл бұрын

maybe...but looking at the reviews it seems like this is a common problem

I don't agree with your opinion of if someone needs to cut a few nail head or some light cutting, he/she might as well get a Bosch corded one with an extension wire if it require far reach. And that should coat less than $49. And it will even get heavy grinding job done. So, those really cheap tools doesn't worth it in any situation. And it's not even nice to look at.

Walrus, random orbital sander

WALRUS - Good video. I would like to see a torture test on a cheap Wet saw for cutting tile. Thanks.

@SpencleyDesignCo

2 жыл бұрын

That's a great idea! Any one in particular?

Definitely get what you pay for! Btw, Walrus and keep up the good work. 👍🏼

@SpencleyDesignCo

2 жыл бұрын

Thanks so much!

Wen track saw needs a torturous test

@SpencleyDesignCo

2 жыл бұрын

I’ve definitely considered it

WALRUS- even corded, how about a circular saw, maybe a track guide that is shop built

@SpencleyDesignCo

2 жыл бұрын

What do you mean by track guide?

@jestersteampunk5755

2 жыл бұрын

@@SpencleyDesignCo home made track saw, nothing store bought

@SpencleyDesignCo

2 жыл бұрын

You want me to stress test one I make myself?

@jestersteampunk5755

2 жыл бұрын

@@SpencleyDesignCo sure, do in in conjunction with a harbor freight, amazon circular saw and see if the cuts are good, on non expensive sheet goods, if such a thing exists

WALRUS I try to make comments on every video I watch here on your channel or on others as I know how important that might be. Being a newbie, I’m trying to pick up every tips and tricks to get my channel standout (well, not that much, but hey you know what I meant), so if you notice I’m using similar tricks in my next from now on please let me if you object. Remember, Life is Short so, Live Long and Prosper … 🖖… Now let’s get back to the rest of the video… Cheers!!!

Walrus. Regardless of how cheap a tool is, I always try to keep my woodworking space separate from my metal working area. I once made the mistake of crossing over and I'm still finding metal shavings in my timber area. Very interesting video, Eric. Maybe you could torture test a cheap battery multi tool?

@SpencleyDesignCo

2 жыл бұрын

I don’t have that sort of space luxury 🤣

@matthysloedolff

2 жыл бұрын

@@SpencleyDesignCo Me neither, hence I only do the metal work when it's summer and nice, because it's all outside 😂 Can't wait to see how that boom arm of yours turns out.

@SpencleyDesignCo

2 жыл бұрын

I hope it turns out well!

@dondale68

2 жыл бұрын

Keep a fire extinguisher handy. Somehow the hot sparks can search out a bit of sawdust!

@SpencleyDesignCo

2 жыл бұрын

Yup! I’ve got one

Walrus

@SpencleyDesignCo

2 жыл бұрын

Thanks for checking out the video, Bill!

Walrus. Im not a fan of angle grinders. Dangerous

@johnnylove6403

2 жыл бұрын

Not if you know how to use them...as A 20+yr Pipefitter/Welder I have used Angle grinders everyday. You just need to learn how to use them and when there is a possibility of binding and kickback

@SpencleyDesignCo

2 жыл бұрын

how about table saws?

Walrus!

@SpencleyDesignCo

Жыл бұрын

I appreciate you watching the video!

I have a Chicago tools 4 inch angle grinder (with a cord, Cordless is mainly for something that last less than five minutes) from Harbor freight from 20 years ago. I have put hundreds of hours into it. The gears are a little rattling but it works perfectly fine still. I have watched a number of your videos and it seems like all you try to do is p*** people off. I watch a number of the short videos and they don't explain anything. I'm sorry I won't subscribe and every time I see one of your videos willl probably be a thumbs down. KZread keeps on throwing your videos to my request lol

That tool is so cheap that a walrus could step on it and it would totally smash...just sayin...

Walrus...Why did you name this video "STOP BUYING TOOLS FROM AMAZON!" It should be named "STOP BUYING "CHEAP" TOOLS FROM AMAZON!" I have purchase many tools from Amazon and have been happy...Like Dewalt, Makita, Milwaukee, Bosch, and even Festool and Woodpecker.

@SpencleyDesignCo

2 жыл бұрын

You're free to name your youtube videos whatever you would like

Torture a Ryobi cordless angle grinder

@SpencleyDesignCo

2 жыл бұрын

Torcher?

@videogameandlegoexplorer5738

2 жыл бұрын

@@SpencleyDesignCo Sorry I spelled it Rong

@SpencleyDesignCo

2 жыл бұрын

No problum

Walrus

Walrus