Holy cow, I was always feeling “left out” because I only have a Joy! No more!

@KeisiaLashawn23

Жыл бұрын

Me to 😂😂

@MsSapphire73

7 ай бұрын

Same ❤

@stevrgrs

5 ай бұрын

How is this any better? You still can't print and cut? I don't get this video at all. The Joy is basically a cutter that costs as much as a 3D Printer :P

I have to say, I have searched and searched for someone to help me with just simply show me how to use design space and Cricut Joy. I never had any luck finding someone until today! You have a great way and patience of showing step by step on how to use design space and Cricut joy AND a better understanding how and why ❤. Thank you so much. I have to let others know about you to. Thank you!!

@gonzjade6017

4 ай бұрын

I can't seem to make the print and cut hack work on the Joy. Can you teach me how?

@ricardosantana6677

4 ай бұрын

@@gonzjade6017 New software version won't allow to do this trick, I've been looking for a proper version to work with.

So cute, will have to try this to see how it works on my Joy. Thanks so much for another great video tutorial ❤❤

Great Hack!!! I've been wanting to make stickers for months, and now I can. Thank you for sharing this with us.

I want to say it was a pleasure to watch the video because most of the time there’s a lot of talking, and the person’s voice is so much to where you can’t watch the video to learn. Thank you for taking your time.

@MakersGonnaLearn

Жыл бұрын

Thank you!

How do you go around the set up that is required of the Maker ?

@jilljillbinks

13 күн бұрын

This is the issue I'm having- did you figure anything out?

That is so great! I think the instructions are very easy to follow and not that complicated. Thank you so much! I do have a Maker, but I have a very small work space, so sometimes it is just easier to use my Joy.

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

ive followed many tutorials, but this one helped my stickers turn out PERFECTLY! thank you so much!

@MakersGonnaLearn

Жыл бұрын

So glad it was helpful!

Best video ever- explained so well- thank you! Will try!

THE MOST USEFUL hack video I've seen in years. I also learned a trick from you guys about magnetizing your blade tool to the front edge while using the pen. TY

@MakersGonnaLearn

7 ай бұрын

So glad it was useful!

That’s an amazing hack for the Joy!!! 💗💗💗

Thanks MGL!! My daughter-in-law just got a cricut joy and she's wanting to make stickers. Now, I can show her how. Of course, I have to get her a printer but that's all good. Love MGL and all that you guys do for us!!

@MakersGonnaLearn

7 ай бұрын

Thanks for the love and support!

This was great! Thank you 😊

This is amazing. I can't wait to try this.

@MakersGonnaLearn

Жыл бұрын

Have fun!

Thank you so much fot this detail tutorial. I thought I needed a scan & cut machine, but this is a great solution! THANKS!!!

@MakersGonnaLearn

Жыл бұрын

You're so welcome!

I love this!! I have the Joy and the Explore Air 2 and I love them!!

@MakersGonnaLearn

Жыл бұрын

Glad you liked it! Thank yo for watching. 😊

Wow! I have a Maker but a few of my craft friends have the Joy. I will share this video with them. Love it!

@MakersGonnaLearn

Жыл бұрын

Awesome! Thank you!

Thanks for this learning experience. I'm having trouble with my maker print and cut and even though may not be able to make as many stickers with the JOY, love that I can.

@MakersGonnaLearn

11 ай бұрын

You can do it!

Thank you. I really appreciate your help. 😊

@MakersGonnaLearn

8 ай бұрын

Any time!

What an awesome detailed guide. I'm far from being technologically challenged, but this was one of the more frustrating experiences, trying to print and cut stickers on a dang cutting machine. I mean, dozens of hours of research only to be met with wall after wall of research tangents. How hard is it to get a printer to print to scale? SO HARD. Why do inkjet printers have a built in margin that you are unable to interface with? BECAUSE THEY HATE US (and they want to keep ink powder out of mechanisms okay I get it). Why do printers even exist? BECAUSE THE DEVIL WORKS IN MYSTERIOUS WAYS. Yet somehow the Cricut app used in the manner you describe works FLAWLESSLY and removes all of my scaling issues and is the only tool smart enough to work with my printers margins to keep scaling accurate. You single-handedly solved every single problem I was facing with what I thought would be a simple task, and because of you now it IS a simple task!

I just got a joy! I've never done anything! Subscribed, and ready to watch more videos! ❤

This is awesome. I love stickers and using them in my planner. Can't wait to give this a try. TFS

@MakersGonnaLearn

4 ай бұрын

You are so welcome!

Works for me! Thanks for this awesome hack!👍👍

@MakersGonnaLearn

Жыл бұрын

So glad! You're welcome!

Great hack. Thank you for sharing❤

@MakersGonnaLearn

Жыл бұрын

Any time!

Thank you for this video!! Excellent instructions!

@MakersGonnaLearn

4 ай бұрын

Glad you enjoyed it!

I had to buy a used Joy since I can't afford the others but that's a great hack. It's going to take some practice but I hope to create some cute stickers. Thanks.

Great tutorial. Can't wait to try it on my Joy.

@MakersGonnaLearn

Жыл бұрын

Hope you enjoy it!

Thanks. That was a great tutorial. 😊

@MakersGonnaLearn

11 ай бұрын

Glad you enjoyed it!

This is great news,definitely going to try this hack😃🙌

@MakersGonnaLearn

Жыл бұрын

Enjoy!

Thank you, honey now I can finally make stickers. I'm so happy 😁

@MakersGonnaLearn

9 ай бұрын

You’re welcome 😊

Also, I don’t know why cricut Joy didn’t just give us this sticker cut in the first place. 😮 I originally didn’t buy the Joy simply because it didn’t have this feature

@MsSapphire73

6 ай бұрын

Great point! ❤️

@jocelyngarcia-castro2812

6 ай бұрын

I agree with you 100%. With all the updates print and cut should considered for the Cricut Joy.

Thank you so much, your step by step video helped me a lot! I'll have to practice but the first try was great!

@MakersGonnaLearn

Жыл бұрын

Glad you liked it! Thank you for watching.

@rianaandriamady5814

5 ай бұрын

@@MakersGonnaLearn I'm so upset, it seems that this workaround no longer works with the last update of Design Space. Now it asks to configure the machine before you can print, and I don't own any Maker 😢

Thank you so much for making this video. I didnt think id be able to make stickers on my joy. But this vid nade it possible.

@MakersGonnaLearn

Ай бұрын

You’re welcome 😊

Complicated but excellent guide. Thanks so much

@MakersGonnaLearn

4 ай бұрын

You are welcome!

THANK YOU 👏👏👏

🎉🎉🎉thank you so much for this hack ❤❤🎉🎉

@MakersGonnaLearn

Жыл бұрын

You're welcome!

this was my first time doing this as I have a Cricut joy and am new to the Cricut world! I had some trouble with my printer at first, but I kept going and I am glad to say that this hack really works, now I can make stickers for my class! my only thing now is what advice would you give if you wanted to use all of the paper not just that certain half because there were leftovers?

@jodiepollard1932

5 ай бұрын

Hi how did you connect your printer? I can't seem to do that step so it's only giving me the option to cut not print x

@gonzjade6017

4 ай бұрын

Can you teach me how? Coz when I pressed Make, it says " MACHINE SETUP REQUIRED. To make projects with the Cricut Maker 3, you must first register it to your account." I tried the other Cricut machines but still no luck...

Love this!!!!!!❤

@MakersGonnaLearn

Жыл бұрын

So glad you love it!

Great tutorial, Lauren! What material cut setting would you recommend using if you decide to cover the sticker paper with Starcraft Matte laminate?

I'm expecting my Cricut Joy any day now. I am so excited!!!!

@MakersGonnaLearn

11 ай бұрын

Woohoo!!!

THANK YOU!!😘

@MakersGonnaLearn

Ай бұрын

You're welcome!!

😁 Love this vjdeo! So glad us Joy users can make stickers with this hack! THANK YOU! 😊💖

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

Amazing hack 🙌

@MakersGonnaLearn

Жыл бұрын

Glad you think so!

I just subscribed I purchased last December and still learning how to use 😊

@MakersGonnaLearn

9 ай бұрын

Thanks for subbing!

Just recently got a second hand Joy and this has got to be one of the most useful videos i ever found on the internet, i got the Joy for vinyl stickers but i was wondering how can one print custom stickers with it

This is great. For me

Awesome tutorial

@MakersGonnaLearn

11 ай бұрын

Glad you think so!

I have a circuit mini still new in the box, one day I hope to use it

@jmcleod9

Жыл бұрын

Go for it! Pop it open and do the setup tutorial. You'll be hooked. 😊

Hi. Thanks for this. I want to make candle dust covers that I designed on canva. Any advice on the process? I recently got my cricut joy. Thank you.

Amazing!

@MakersGonnaLearn

6 ай бұрын

Thank you for watching!

For anyone having issues with it forcing you to set up a maker. Literally just disconnect your Internet and then re-connect when you're in the print/prepare section.

@esthermyrtle

6 ай бұрын

This worked for me! Thanks!

@Moonattica

4 ай бұрын

Lo intentaré 😊

@Paragkini

Ай бұрын

This worked for me. I could print without having any machine other then Joy. Disconnecting internet is the key.

@juliasuedebliss6512

22 күн бұрын

Still didn’t allow me to continue. Only Cancel Button available, no Continue Button.

@mxmissy

22 күн бұрын

@@juliasuedebliss6512 It might've been updated since I posted this five months ago.

Thank you very much. Your explanation is quite clear enough.Thank you again. But the canva is also need to check the setting .

@MakersGonnaLearn

10 ай бұрын

You're welcome!

I found this hack to be a great bit of info! Thanks :) I also really like the HTVRONT glossy sticker paper but need a bit of help. My HP Officejet 8715 that works fine typically (and one time printed this paper successfully) keeps having trouble drawing in the paper or starting the paper print randomly 1/2 to 3/4 into the paper. Any ideas?

GREAT HACK! How did you come up with this amazing Hack? I love that you are always coming up with so many things and sharing with us all.

@miagnagey

Жыл бұрын

They didn’t.😅It’s been on you tube for some time

Terrific video. TFS 😄Linda

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

I have been so frustrated trying to print and cut on my Joy. I cannot wait until tomorrow to do this!

No this is a hack , this is awesome, thank you for showing us this .

@MakersGonnaLearn

3 ай бұрын

You're welcome!

Can this hack also work with print and cut iron on or is there another hack for that? Thank you for your info and you videos! I’ve just gotten the cricut bug and am excited about the joys’ of crafting! 😊

Thank you so much, you saved my day! I was just trying to figure out what was wrong with Design Space. It’s incredible how Cricut deliberately cut off a software feature that does NOT depend by the Cricut hardware. There just isn’t a single reason for why the Joy couldn’t support Print then Cut.

@MakersGonnaLearn

11 ай бұрын

You're so welcome!

@SkyArcherDev

11 ай бұрын

@@MakersGonnaLearnJust one question: my square set to Pen is not printing. I can see that in the Print before Cut screen, but then it's not there in the actual print. Any clue why? Should I move to the Beta version of the software?

I love this, it there printed instructions? that would be great.

Just got my joy a few months ago. Can you use a joy with a chromebook? Instead of a computer? Tya.

Thanks for sharing this technique. I'm wondering at what point a Joy user should order stickers from a company. I'm thinking, if you do a very small batch of more than one design, as you did in the tutorial, it's worth it. Otherwise, order. Thoughts?

i dont know because i just started using. So, not sure what the hack overrides yet. But I will!

Really helpful video! My only question is, why 4.25x9.25 and not 4.25x11.25? Is there a specific reason for not using a longer sheet?

I tried to follow your steps and design space would not allow me tp print because I did not have a maker machine. so, my workaround was to use snippet and paste into word and print. I then cut out my square and eventually used undo until I got back to my cut file and cut it out, it worked! Cricut company can't blocksnippit and word!!!. just another underhanded shenanigan like the one they pulled when they came out with the first cricut machine.

This is amazing! Looks like it will work so much better than my Gen1 Cameo! I may just fire off some tomorrow on regular label sheets!

Is this hack still possible if you have design space on the iPad? Because the interface is vastly different on that

How do u hack through the print process on iOS? Just as I have to pick an accessories to print which I obviously can't due any ideas

I am having an issue when printing everything connected fine but when my sheet prints out it does not print the square that serves as a guide on where to cut, but only the corner lines. My printer is an Epson is there something I have to do differently to have that square to print??

I just watched your video “THE ULTIMATE PRINTER COMPARISON” but the Canon Pixma TS830 printer that you recommended was discontinued. What printer do you recommend now? This Maker wants to learn lol!!

I'm a bit confused with this. Did you use a canon printer to print the stickers or the Cricut Joy? And if so, do we need a separate printer to be able to do this?

Tengo hace 2 semanas una cricut joy para "stickers" y no sirve 😂 tu tutorial me ayudó, pero no puedo hacer el print and cut. Me pide que configure explore o maker...😢 Esperando un tutorial para esto! Gracias

How can the JOY cut inside small designs without breaking off the pieces? I used smart vinyl and contact paper and got the same results.

Could this work for vinyl too?

Cah i use a smaller mat? currently i have the standard mat

Great tips and easy to follow along: however, when I fit my printed sticker sheet in the prepared area on the Cricut mat, no matter how precise I place it, the cuts are still off. I know you mentioned leaving room for error, but even so, It's still messing up to the degree of throwing out. Any suggestions?

great tutorial! When I toggle to maker instead of joy it tells me I need to set up my machine and won’t let me bypass. Any way to get around this???

When I click make it it ask for me to active a maker machine how did yall get the printer to work

How do u do this on a mobile in design space I don't have a laptop

I'm using design space on an android tablet and it doesn't have the menu to change the machine. Is there anything I can do?

How did you cut the rectangle first?

So new to the circut world and following all the steps here, it wont allow me to "make it" because I have to set up a circut 3 in the program. anyone knows a work around for this?

Hi, I am being asked to register my machine when I choose one of the other machines. How to get around that?

Hi I have tried to do this, but it requires me to set up the explore machine, which I obviously can't do as I only have a joy

Hello, I’m watching your videos there great but I’m having an issue no matter what I do it will not print my square that I make to add my stickers to I just get the 4 corner lines on the paper, do you know where I’m going wrong 😊

@andreas9366

7 ай бұрын

I’m having the same issue. 😢

can I make the length 10.5?

These stickers don’t have an adhesive back, correct? It’s just a cardstock or paper “sticker” that one will need use glue or tape to adhere to a project, am I correct?

Buenos días, he probado varios métodos para hacer stickers en color, pero yo SOLO TENGO LA CRICUT JOY y entonces no puedo pasar a otra máquina como maker 2 o 3 porque la aplicación me dice que necesito configurar la maker y como no la encuentra porque no tengo, no me deja seguir., me pueden ayudar por favor, gracias

My printer does not have rear feed capabilities. Is this necessary?

how do you get around setting up another machine if you only have the Joy? It won't allow me to print the way you do unless I set up another machine :(

thank you for this video but when I want to change de settings from print and cut it not available I change the rectangule to pen but then Ii wont let me change the stickers to basic cut

@annlucy

9 ай бұрын

I keep watching the video and I have the answer 😳😁

Ive been doing exactly as shown in this tutorial for months and it worked great. Today, I've tried to print a saved project and design space tells me i need to register my machine and it won't work. Please tell me that Cricut hasn't created an update which doesn't allow this hack anymore 😢 ????

@AgentGraham27

5 ай бұрын

same problem. I'm being asked to setup my machine first after choosing 'Maker 3'

@cornflakegirl1977LJ

5 ай бұрын

@AgentGraham27 I ended up buying the Joy Xtra and it's so quick and easy to make stickers. I think I'm going to sell my Joy when I've used up my supplies for it.

Hi. This is a wonderful and easy tutorial. The only issue I'm having is that when I click on print in design space the black outline disappears and so when I print it I have no guidelines to trim along. I can't figure out why. Has anyone else had this problem? I would appreciate any tips. Thank you.

@sanaalzuabi9507

5 ай бұрын

having same exact issue. did you figure it out?

I’m still confused where to get the color to print those decals from? I’m new to this completely.

once i click onmake it it tells me to sync the new machine how do i get around this

Hi, thanks for the tutorial. I followed it step-by-step, but when I wanted to send it to the printer the design space wanted to set up a new machine. This is very strange because I did this with Joy in the past. Is this option now available only for specific countries or do I have to have a subscription?

@Juliaececilia

5 ай бұрын

i have the subscription but im having the same problem... i tried the disconnect internet hack but also didnt work :(

@Moonattica

4 ай бұрын

Same problem here😢!

I am currently trying this, but it wants me to set up the Maker 3 (which I used to make the Print & Cut), but I only have the joy. It will not let me proceed to the next step: printing.

@nredman52

23 күн бұрын

Same issue. 😞

So this means I don’t have to calibrate my printer to the Cricut Joy?

when I select the maker 3 it tells me I have to set the maker 3 first to continue.

i cant change joy with explorer 3 couse it need bluetooth or usb chek so i dont have it and help me here what i have to do?

@TheOnsieSharkie

2 ай бұрын

Same I clicked the explorer 3 and it says I need to set it up