The 3.4 is actually zero interference so if you snap a belt its no big deal. Good video as always!

@crashsoome

Жыл бұрын

Yes you beat me to it

@crashsoome

Жыл бұрын

I had 282k on my engine never replaced the belt😊

@justinmatthewl

Жыл бұрын

Yep I bought a tacoma with a broke belt. Owner thought the motor was trashed. Put a new belt on it and drove for years after that.

@bige311

Жыл бұрын

​@@justinmatthewl same thing happened to me I almost felt guilty when I drove the truck :)..

Just as a heads up, that 3.4 is supposed to get a dual electrode spark plug. The 3.4 uses a waste spark ignition ignition system. The plugs fire on the exhaust stroke too when the cylinder that they are paired with is on it's compression stroke. Since the plugs fire twice as often, the dual prong makes them last as long as a single prong that is not installed in a waste spark application. Also, It's a non-interference engine, so pistons cant kiss valves in the event that the timing belt snaps

I know this video will be good because its Mike.

@heladiomoreno5504

Жыл бұрын

I hit the like button before the video even starts

I think your suppose to use twin prong spark plugs on the 3.4 but I’ve heard guys say it doesn’t matter… there is a sticker from Toyota on the engine… love the build so far

@MrDan1509

Жыл бұрын

OE plugs from the dealer are only a buck and some change more than the NGK Type R plugs.. I love NGK but you only get 17K miles before they have to be changed out. OE plugs are still like new at a 100k.. I just changed the factory plugs in my 2005 4runner 3 yrs ago at 235k. I know they was original because i got my rug from an old couple that bought it new and always serviced at a toyota dealership. The My Toyota Record shows they was never changed out! I gained 2 extra miles per gallon with the new plugs if that says anything about the OE plugs!

This Tacoma has quickly become my favorite truck on the channel! I think you should keep this one, Good budget build

I don't mind waiting a few weeks for a new video because Mike always delivers!!

I like that you work on vehicles that us everyday folk would consider buying and building. Too many channels go to the extreme where it’s not even realistic unless you have a full blow fab shop. Keep it up

@mikes4x4garage

4 ай бұрын

ha! im just a normal folk anyway lol

Ive really started to dive into working on my own truck because of these videos. I like how you leave in the little mistakes here and there because it makes it seem so much more doable for us non mechanically inclined haha

This motor is non interference which means if the timing belt breaks you actually won’t contact valves which is nie but definitely still don’t want that breaking on you. I just did my timing belt on my motor! Keep up the good work!

I’ve also heard that the oem spark plugs on these motors make a little bit of a difference over the NGK brand. Specifically for this Toyota motor. Something with the dual electrode keeps it burning the fuel more efficiently

@JLeeChron

Жыл бұрын

3 coils for all 6 cylinders is why Toyota recommended Twins should be used for optimal spark/performance

Good thing about the 5VZFE it’s non interference so you wouldn’t have to worry about bending any valves 😊

The 5VZ is such a beast you can just let the timing belt uninstall itself and the valves won't meet the pistons.

the jeep timing chain should actually be replaced at some point, they stretch out eventually. just got done doing a 4.2 in my friends CJ and the chain was so sloppy it was eating a hole in the cover

Replace the spark plugs you put in with dual electrode. That’s what these engines call for

Don't know if you're a "by the book" guy but there is a sticker in the engine bay saying to use dual electrode plugs like the ones you pulled. Just an FYI. Love the vids man keep it up!

Like the videos Mike. Always good to see someone figure things out instead of taking it somewhere to get done. Solid entertainment too. Thanks for the vids!

Fantastic job, man. Love watching your videos. Looking forward to the next one.

I have the same wheels on my magnetic grey F150. I did take a hole saw cut out the Rocktrix logo and epoxied in some custom ones a friend 3D printed. Raptor caps will also work

Timing chains break, tensioners break, it’s a lot easier to change a belt than a chain. Both of my roommates had their timing chains break before 170k miles. One was a Colorado, the other was a Cobalt.

Great video to watch, just like back in the day watching truckin' on the weekends! Making a complex task so easy and simple to do is probably the best thing to watch on KZread! Comes in handy for those who try and have troubleshooting similar tasks of there own with this model and make so thank you on behalf of those who need guidance! Great sound effects and nice cowboy hat! Lol keep these cool videos coming partner! Definitely enjoying the content! 💯🏁

Good work Mike. Lots accomplished!

That wheel/tire combo is slick! Can't wait for the next episode!

Great content as always! Keep'em coming Mike!!!!

I’d like to thank this channel for reminding me to blast 90s jams while I’m working on my bikes.

Looking good, I’ve got the same wheels on my 3rd gen 4Runner love ‘em! Keep up the good content!

Love the Tacoma content! I’ve learned so much from you and appreciate the hard work 👊

So hype to see you upload this, been looking forward to it. Had the 3.4 in my 3rd Gen 4Runner and loved it. Also those wheels and tires are fucking SICK

It's always a good day when Mike uploads. Great work!

@mikes4x4garage

Жыл бұрын

Thank you!

Looks so much better already

@mikes4x4garage

Жыл бұрын

Thank you🫡

fantastic video as always Mike, you have a good thing going here

Wicked repairs so far! Shocks came out beautiful.

Great video dude, decided to get the same wheels on mine after this video. Just finished up putting new suspension on with a 3 inch lift and they will be the cherry on top. The money pit is deep over here.

Looking forward to this build! It's gonna be sick

I always love your vids man! Keep up the great work

New wheels are sick - makes the truck look much better!

Thanks bro i love the 20min beer break you give me 🍻

Your intro statement is exactly why im here for every video. LOL keep up the great entertaining videos.

I laugh every time when I see a shot of harbor freight in the video 😂

you're the man!! i have an '04. love it! 5 speed. very fun and useful

@mikes4x4garage

Жыл бұрын

Thanks Paul!

build is coming out nice and the new tires and rims look good

Love this channel keep up the good content.

Wheels & tyres look great. Everything turned out just fine, you did well. 👍🏽😎

@mikes4x4garage

Жыл бұрын

Thank you Gavin!

I had a set of rocktrix wheels on my old jk and the wheels were the best part of the jeep. The fit and finish was awesome and they actually had great customer service when i went to order a 5th but they were out of stock on their site. They balanced well with my MT's, looked awesome, and like you mentioned were by far the cheapest thing available.

Great progress i am thinking about picking up a 98 4runner cheap this series is an inspiration

Dude keep it up! Killing it

Another great video! Well done mate!

Don’t sleep on the M12 Fuel Stubby. It gets into tight spaces and can still pull a bulls nuts off. It’s great for engine work as well lol. Still have my M18 but rarely does it need to come out of its drawer. Just use a 4,5, or 6.0 batt on it and you’ll see what I mean .

Love it! Keep ‘em coming!

@mikes4x4garage

Жыл бұрын

Thank you!

I have had the rock trix wheels on my 1st gen for almost a year now. there great!

Love the budget builds. Nice cleanse of the palette from the crazy over built rigs that are flooding the KZread content

@mikes4x4garage

Жыл бұрын

We’re on a budget for sure!

The cut to harbor freight 😂 every job ive ever done

Love this bro awesome work

The wheels are really turning the look of that truck around! Good job as always Mike

@mikes4x4garage

Жыл бұрын

Thank you! they’re a little darker than I thought they’d be. I still like them though!

Great content. Keep it up!

Another great video👍👍👍

Really enjoying this build I drive a 2004 love it 🤘

Chet Faker making an appearance at 17:31, a man of culture I see

@mikes4x4garage

Жыл бұрын

🤌🏻

Waiting for some work on this truck! Non interference so if the belt does go -not tragic Ive had 224k on an original and it was still going .. cracked and needed done tho- Also twin tip replacements (see the decal on the tb cover) 👍 Great work Mike

@mikes4x4garage

Жыл бұрын

That’s good to know! I wish rock auto would’ve suggested the double tips then, I didn’t do any research prior haha

love these vids! keep it up man.

Can't wait to see this thing out on the trail

@mikes4x4garage

Жыл бұрын

😎😎😎

That 3.4L takes those dual spark plugs! But good job on the truck man! Love the videos!!

I put a Eaton Elocker in my front diff with a 2.5” liftand a new set of Baja Boss A/T

I can’t wait for this channel to become huge so you can quit your day job and post more. Keep it up man!

@mikes4x4garage

Жыл бұрын

That would be something! I’ll keep grinding!

Dude wtf! You’re always finding the best tire deals in the state! Wtf! Lol that’s awesome!

Yew ! Stoked to watch

lets goooo! been waiting for another vid from you

Niiiice! Love mikes vids.

Always a good day when there’s a new episode

Don’t forget to like before you start asking if you can fit 33”s with stock suspension. Keep up the good work bro!

Okay, Mike.....it's been close to a month now....we need a new video🤣

I do like watching those kinds of videos 😉 Ready for body work!

Love your content sold my 2000 taco and now I want one again because of you 😂

@mikes4x4garage

Жыл бұрын

They are fun little trucks

Always a good day when money mike posts

I have a 2.7 which actually has a chain, so toyota did do that for some models.

I am in Vacaville. Get the proper adapter and I have nitrogen and we can re charge those shocks.

Music taste: 🔥 Truck taste: 🔥 Hat taste: 🔥 Beer taste: 🔥 Love this channel

@mikes4x4garage

Жыл бұрын

Thank you sir 🔥

You can discount the brake line mounts and pull the axles out just enough to pull the 3rd member.

Those wheels are nice!! Luv the color

@mikes4x4garage

Жыл бұрын

Me too!

No Brewskies on this one? lol... The truck is looking good!!

I actually bought the OEM spark plugs for my brother, same engine V6, I got 6 and it costed me $15 lol Also I think NGK spark plugs you should not put anti seize

Gettin work done Mike! Supercharger in the future??

Supercharge it especially since you got a 3.4 engine the way it sounds with the supercharge is the best 💯

Perfecto el trabajo,no seria conveniente cambiar las correas exteriores o auxilisres? Excelente video ,saludos👏👏👏👏👍🍻

“Okay they are not that much lighter” 😂😂

Absolutely love your videos. What do you for work full time? Assuming you aren't a mechanic since you do this stuff on the side but you're a damn good one.

@mikes4x4garage

Жыл бұрын

Thank you! I’m actually a diesel mechanic for the Coast Guard 👍🏻

was waiting for this haha

It’s wild that someone put kings on that beat up of a truck

Cheap cars have been some of my most expensive cars haha

@mikes4x4garage

Жыл бұрын

Absolutely!

Awesome

Nice 🔥

3.4 zero interference !

What color painting the body? Toyota Orange with black bumpers and flares would be nice. Can't believe a bit of work and those dampeners look new.

If you really wanted to do it the easy you could of just unbolted the brake lines and pull the axle shafts out about 2-3 inches to get the third member out . I’ve done it without fully removing them . Just a tip

@mikes4x4garage

Жыл бұрын

Good to know

@ukeacreator93

Жыл бұрын

@@mikes4x4garage I think you did the right thing by leaving the leaf packs alone . It is sitting pretty nice they way it is !

Fun fact. The timing chains on the 4.0 jeep motor can fail and cause a mess. Ask me how I know😅. They are both non-interference motors though.

@mikes4x4garage

Жыл бұрын

Oh I’m sure, anything can!

Your shocks are to long is what caused the bracket to crack the dont compress far enough

The différence between chain and timing belt ? The money you spend on replace the timing belt kit ! Almost 40% of the car builder's benefit come from parts and repairs...

My posse's on Broadway Posse up!

@mikes4x4garage

Жыл бұрын

🫡

@Kyle-ev4fk

Жыл бұрын

@@mikes4x4garage though I am cool enough to know the song, I have no idea what your emoji means... so I am going to take it as offensive.

I can smell that diff from here

@mikes4x4garage

Жыл бұрын

Yummy diff fluid

Hey man did you check ur rear diff breather for mud? It’s on the top of the diff if it gets clogged it’ll make ur rear diff leak

@mikes4x4garage

Жыл бұрын

Yeah I did, it’s looking good. The new seal has stopped the leak 🤌🏻

That grill has got to go