The Charlie Show /// Episode 327 /// Justock 13.5 Tunalyzer Comparison
Тәжірибелік нұсқаулар және стиль
More motor comparisons with the Tunalyzer, and covering the features and use. Comparing your motor setup with your gearing, or ESC tune can help racers stay consistent when changes have to be made. You can also track a motors performance over time and confirm if changes are needed. Built in OTA, ESC test feature, and a very easy read touch screen make the Tunalyzer a great tool for RC nerds looking to keep tabs on their gear.
Tunalyzer:
www.hobbywingdirect.com/produ...
Justock motor:
www.hobbywingdirect.com/produ...
HOBBYWING Official KZread
+++++ Cars & Trucks +++++
Xerun series (Professional grade)
Ezrun series (RTR / MAX upgrade)
QuicRun (starters)
+++++ Helicopters & Airplanes +++++
Platinum Series
Flyfun Series
Skywalker Series
+++++ DRONE +++++
XRotor Pro Series (Pro.Filming /industrial, Gov. research)
XRotor FPV "M" Series (FPV Racing)
XRotor Series
+++++ Marine +++++
SEAKING Pro Series (Speed racing)
SEAKING Series (Marine)
Our mission: Help create memorable moments worldwide.
HOBBYWING Factory: www.Hobbywing.com
HOBBYWING North America: www.HobbywingDirect.com
Hobbywing
Twitter.com/Hobbywing_
Copyright & Trademark
HOBBYWING is a registered trademark of Hobbywing technology.
#HOBBYWING #NerdTheNewCool #HDUB
Пікірлер: 7
Any eta on the new drag motors that where supposed to be released awhile ago????
Great video 👍 I would like to see the motors tested under load. Mount them to a stand, use a moderate pitch airplane prop, and see what the rpm’s are “under load” this is where I have found motors to be completely different when the specs say there nearly the same. I would of course expect two of the same motor to perform alike, I concern is the two different makes of motor with the same specs. Thanks for the info.
So these motor don't come at zero timing. I'm attempting to run one of these motors in reverse. So the timing needs to be adjusted. I guess this means I need to get an adjustable end bell motor to do what I would want to do with it? So I can add the timing so it will be correct to run in reverse?
About the drag motors. Can the current pro ECS handle a 2.0t or so drag motor? I’m using a 4.5t on a 1/10 truggy and it’s getting a work out.
This is what hobby wing should be doing KV per amp for efficiency results. I believe more copper and less iron in the slots will make better efficiency
I hope this tool goes down in price
Promo*SM ☺️