Thanks! this is a handy one, fresh or salt water.

@FishingknotsChannel

Жыл бұрын

can be applied in both places

@dacelltigo3867

Жыл бұрын

​@@FishingknotsChannel ❤❤❤❤❤❤❤😊

I did this knot while fishing in the morning on my kayak, by the time i finished i had unknowingly floated 900 miles out to sea

@martwilliams1733

4 ай бұрын

😂😂👌

@488ci

3 ай бұрын

🤠😆👍

@ronforeman5317

Ай бұрын

Figured that happened with an FG.

@jonathanruiz9175

29 күн бұрын

😂😂😂😂😂😂😂

@phillamoore157

19 күн бұрын

🤣🤣🤣🤣🤣🤣

Tied the Alberto backwards, ALMOST always your mono/flouro is thicker than your braid. Wrap braid around mono!!!! IMPORTANT that the wrapping line exits the "loop" to the same side it entered. For offshore we tie a lot of 40 or 50lb flouro to 30lb braid. Could you imagine trying to wrap 40 lb flouro around braid?? Good luck with that!

@tonysicily2687

Жыл бұрын

A great piece of advice.

@slipngrip

Жыл бұрын

Yeah man I wouldn't want that fat chunk of fluoro blasting thru my guides

@RogueSmithers

Жыл бұрын

Pass the tag end through the loop opposite direction it first entered and ya got the Albright

@minus_IT

Жыл бұрын

I thought the exact same thing!

@HouseNoteswithJim

Жыл бұрын

Crazy Alberto is my go-to knot.

I have used this Carrot knot in conjunction with the Bimini Twist for over 50 years, and never had a fail !.

@keithbroyles6902

2 ай бұрын

I'd love to know more about the process on that. Could you explain in more detail what it looks like from braid to bumper fluoro? 👍🏻

Good knot. Not sure but I believe it's called the Alberto knot.

@AddictedAngler

Жыл бұрын

Yes it’s albernot

@Fishing31South

Жыл бұрын

Alberto is braid wrapped around Mono , this is mono around braid .... Yeah cool but thicker than the original

I do this one immediately... In my life I always do the double albright knot with satisfaction and a minimal mistakes on a spinning fishing session... but this one appear more accurated and even with a small diameters such as in an eging braid and mono is easy to see every turn of the lines. Thanks a lot 👍🏻

Awesome now I am done with fg knot thank God 💚💚💚💚💚

I like the double uni knot.

This knot looks easier for my old arthritis fingers 😊

All backwards. Braid around mono or floro. And top of carrot goes towards reel. So you can cast without getting hung up.

@iLearnt-IT-on-You-Tubes

4 ай бұрын

Iv done it your way and my tag end tends to point up and away from the reel causing the tag to wrap around my guides. was thinking maybe this would make the tag point towards my reel so if it duz snag it will snag on when i reel in which would be more manageable. Right?

Braid should wrap around the leader as it will go through the rings better and the reel

Looks like a great knot but the albright seems a lot quicker and easier. I also feel wrapping the braid around the mono makes the knot stronger and gives it a lower profile.

@stevensands33

Жыл бұрын

On top of that the braid protects the leader through the guides. If an albright breaks it was tied extremely wrong.

@CHOPERUS23

Жыл бұрын

@@stevensands33 What drugs are you smoking son? Mono is far more abrassive resistant than braid.

@stevensands33

Жыл бұрын

@@CHOPERUS23 lol what? Mono is much weaker than braid. There isn’t really much else to say.

@pizzarat3275

Жыл бұрын

@@stevensands33 Mono has higher abrasion resistance than braid because it's a single filament. Since braid is woven from many individual fibers once a few of them are compromised there's more and more stress on the remaining fibers and they just give out. In the case of leader knots you want the mono on the outside taking the hits against the guides unless it's much, much thicker than the braid.

@stevensands33

Жыл бұрын

@@pizzarat3275 ok but performance wise braid out performs mono in these scenarios still. I’ll take a few frayed brands of braid over fresh mono in any situation. If you guys are talking about giant mono for saltwater fish then I guess it wouldn’t matter. I’m taking light lines.

Smaller the knot the better! May be fine with bigger pole eyelets but for me FG is the bomb and double uni are my go tools but I like to learn new things...nice video

@kennethlukes1897

Жыл бұрын

FG is great! Like the Bimini Twist really lost its popularity due to its level of complexity. Complexity in general leads to error. Great knot lots of practice. 3:51

@FishNFoolLures

Жыл бұрын

I would never use a double uni. The Albero knot is easier to tie, smaller, and twice as strong I use is on all lines that are about the same diameter, To tie heavy leader to braid the FG is the ONLY way to go.

You need to do it in reverse like the Alberto Knot. The tag end doesn’t catch on the eyes when casting. Wrap the braid around the fluorocarbon.

Thanks!

This is the Albright knot in reverse. Instead of wrapping the braid around the mono, you wrap the mono around the braid. Brilliant!

@kennethlukes1897

Жыл бұрын

The Albright does not wrap over itself like this one does. You may be thinking of the Alberto and not Albright

@anthonygumina7150

Жыл бұрын

The Albright we use to tie our top shot for cod fishing. We like to call it the baccala knot.😊

@CaptainForest1

2 ай бұрын

Albright Is better for heavier monofilament

Thank you for sharing my friend new friend watching

@FishingknotsChannel

Жыл бұрын

Thnks brother 🤙🤙🤙

Ahh you gotta Hawk Tuah and spit on that thang. Nice knot.

Carrot = Alberto….Great knot! When casting jigs for walleye my trilene knot at the jig will fail on snags and the Alberto never lets go.

Thank s for show another ways of method to tide the knot 2 different kinds of lines👍👍up.

Awesome and super easy to tie !!! I'll be trying it next trip out, next week! TYVM!!!

Perfeição !!!!!! Top !!!!

Without even talking, dude is able to teach us how to tie these knots. Thank you so much for your content.

Я пользовался узлом Олбрайт до того, как узнал про узел Морковка. Морковка получатся тоньше и надежнее, узел Олбрайт у меня нередко распускался.

I usually wrap the braid around the mono,don’t know which is stronger but works well.

@5wisher5weet

Жыл бұрын

Would be slimmer too?

@TexasPapa13

3 ай бұрын

Braid around mono is better. Braid digs into mono and the knot will be skinnier.

It’s just like the Alberto knot. Way easier wrapping braid over Flouro just FYI for guys trying this knot.

Wow, that is quick knot to tie. I will remember this when I need to rigged up quick.

This is the best lead feeds smooth casting barely can tell switch I'm just beginning but as all beginners learning a whole lot about knots looking forward to much more tips and ??? WWay CCool thanks

Great knot but would never put a flame near my line. If you look closely You can see the melting of the mono/ flouro at the knot. It’s unnecessary and can only weaken the line. Especially if you are bouncing on the waves. Your method looks simple and quick other than the fire. Thank you I’m going to try it

@badm.d

11 ай бұрын

Mushrooms are necessary on lots of knots. If you wet the line and use your nails to gaurd the knot it is completely fine.

@punci22

5 ай бұрын

Exactly!!!! It's perfectly safe and better too! A little caution and you good!@@badm.d

A nice-looking knot, but, in my opinion, a hybridisation of the Yucatan and Carrot Knot. The true Carrot Knot goes by several different names - Carrot Knot, Bullet Knot, Mahin Leader Knot, and always starts with an Overhead Knot (Granny Knot) usually on the leader line. Once completed, you have a knot with all the tag ends at the back of the knot and all the wraps at the front of the knot forming a close approximation to a 'carrot' or 'bullet' from which it derives its name. Normally, the main line, like braid, will be thinner than the leader line material, so it makes sense to make the overhead knot on the thicker material. But should your main line be thicker than your leader line - say 20 lbs main line to 12 lbs fluoro, you are better off making the overhead knot on the main line and using the thinner leader line to make the wraps. It will be just as strong, but not as stream-lines since your wraps will now be facing inwards towards the reel rather than outwards in the direction of cast.

Thanks for the video. I learned that as being the worm knot.

knots such as this are not so easy to do on the bank or in the boat with the wind howling into your face, for this reason I find that a simple 6 wrap surgeons knot is much easier to do when I am attaching my fluorocarbon leader to my braid

Thankyou I was always breaking off now that I know the correct way I will be ok thanks man I'm going to use that connection of lines when needed appreciate you thanks

Did you know that instead of using that highly functional $1 USD nailclipper (which you don't care if you drop in the water because you have three more in your bag) that you could spend $80 USD on a clipper from Simms that doesn't work as well and is just as easy to lose? You're welcome.

Always use Berkley because it is always a good line. Never has failed me. Also, made in the USA which is important to me.

thank you, the fishing knot is very good and easy to apply

This is a great knot I have used for 10 years. You need to tie the braid in a loop with a knot and do a half granny knot on the leader. If these steps aren’t done your knot won’t be as strong. I’ve spent many hours testing knots to prove it.

thanks best knot ever and esay thanks a lot

The fluorocarbon looked very stressed at the end of the knot

I needed to learn how to tie a leader to braid and just started trying things and this is what i eventually came up with except i double up both lines. Glad i know what its called now

Great video thanks .😊

Great demo except it would be better if you lubed up the line before you start pulling on the lines! Will help prevent burning the mono from the friction.

great sir, greetings from indonesian fishing

@FishingknotsChannel

Жыл бұрын

Thanks brother

Well done, you just created a bigger version of the Alberto. LOL

Improved albright knot.

Wonderful! I think it is strong like the F.G knot

Terima kasih perkongsiannya bang...Salam satu hobby🤝🏽

Improved Albright been tying it for years. And no way it's 1000 x stronger that the line

Simple knots work fine for inshore fishing. Its about teeth and abrasion. Surgeons knot works fine tied in 10 seconds. Then I use FC with a renzetti finish for light freshwater.

We call it the Crazy Alberto knot

I like the knot for sure looks simple enough to tile. I will play with it but the FG knot is still my go to.

@TACOINSURANCE

Жыл бұрын

Once I learned the FG there’s no going back, except for a quick tie-on when I’m in an awkward position, then I’ll use the improved Albright. Nothing beats the low profile and strength of the FG, especially when you’re using line of any thickness

@forrhs8430

4 ай бұрын

But the FG knot is so damm cumbersome to tie

@CaseyWWelch

4 ай бұрын

@forrhs8430 I can't disagree with you. I have been using it for the last 4 years. I sat at home for the better part of a year watching the BASS live events and the MLF live events on the TV/phone and tied the knot with line I was planning on donating until I felt I had it down to where I could fish it in a tournament. It was taking about 2 to 3 minutes to tie it aside from the fact that it would take two or three tries before it actually worked. Now, it takes about 30 seconds, and it won't affect my fishing.

The braid should be wrap around and biting to flouri leader, not the other way around

Strong knot but despite wetting the knot you can see the friction on the leader between the knot and the leader which makes it vulnerable

looks like a reverse albright knot, would be interesting to see which is strongest of the two

Oh again. Loon UV Knot Sense is the shit for finishing knots. No melting, no super glue, no BS. You all have a lot to learn.

Sama kuatnya FG knot, tp ini lebih mudah

I know the FG is the strongest know but this knot is so fast and easy. Sometime good enough is all you need.

Uni to uni done......

nice..

Mate, Brilliant! .. Thank you.

A allegory for “there’s a right way to do things and a wrong way to do things”. -reverse Alberto Knot, you can see the damage line on the left.

it is an albright knot made in reverse by spinning the nylon instead of the braided thread

Yeah I’m gonna pack gloves and put them on every time I want to tie on a leader. I use Albright knot, no gloves, 60 seconds and I’m fishing and haven’t had a failure in 20 plus years.

Nice

thumbnail looking like a game bug gg

So many knot vids.....many are similar in nature & look effective. My only problem with braided(20lb) main to fluorocarbon(~8lb) leader....these smaller diameter lines are IMO more difficult to tie with some of these videos....if not the double uni...it's a swivel which also prevents line twist for the win.

I wonder what breaking strain versus the uni knot ?

This is the alberto knot I think? Seems the same. Great knot!

Watching so many of these knot videos lately I just have to stop and wonder. How the heck do people come up with some of these knots!!!

This only works better with only half amount of windings 8 ends up 4when tied back to knot Lubrication is absolute must😅😅😅😅😅😅😮😮

The proper Alberto is knot is my favorite knot. I use it every time I fish. If I free line it’s the Alberto knot 100% of the time. Super strong and easy on the guides.

@FishNFoolLures

Жыл бұрын

This looks like an Alberto knot to me just wrapping the flouro around the braid instead of the other way around, Doesn't look like a good knot to me but I will test is and see if it is worth using.

@Gophacyerself

Жыл бұрын

@@FishNFoolLures You should knot wrap with the flouro, wrapping with the braid protects the flouro line from abrasion.

Excellent knot

@FishingknotsChannel

2 ай бұрын

🙏🙏

That’s the easiest way I’ve ever seen it done 🤓👍

Thanks for sharing

Nice. Thanks for sharing your knot tying abilities. I will definitely use this knot. Thanks

This channel is maximum dope 👍🏼

Ikatan nya Sangat bagus kuat dan rapih Mr🤔👍🎣🔔💪

@FishingknotsChannel

Жыл бұрын

Thanks

Seems like a modified becket bend or sheet bend knot. The only difference is instead of wrapping the smaller diameter line around the bite of bigger diameter once, you did it many times and then retraced it and THEN put it back through the loop. Very interesting I'll definitely be using this from now on

Cool knot, just doubt it would work for lighter line, with that kind of tension you'll break the flouro everytime! What lb test is this flouro, must be at least 20-30 yeah?

Albright special is my go to knot for braid to mono

PEとリーダーを締め込んだ時にリーダーがよれて伸びちゃってるじゃん！　結び目は強いだろうけど、摩擦で伸びたリーダー部分はかなり強度弱るよねー！

Muy bueno 👍 Pero el nudo siempre deforma la linea adelgazándola en alguna parte, se ve claro al final del video. ✅

You got soft hands brother 👨🏿‍🦳

Yeah Ill stick with the Alberto. Been using it for over a decade with out a problem. Its simple, fast, and hard to get wrong. It may not be the strongest knot but Im fishing for bass, not Atlantic blue marlin. Try tying this knot or knots like the FG on a windy day on a pitching bass boat in foot rollers. Good luck!

@thecrakanot

10 ай бұрын

I use that knot and I’ve had huge black tip sharks and it’s never ever once broke off always breaks off at my snap snivel. Even if I get snagged on the reef it’s never has broken off

@Peter-zg3em

10 ай бұрын

fg is the strongest knot you can tie without a bobbin and the only leader to braid knot i would ever use. most people won't need it. alberto is a northeast surfcaster and he needed something he can tie out on a rock at night when the waves are breaking around you. as far as i know he's caught more 50 lb stripers from shore than any man alive.

@johnbuniack5671

5 ай бұрын

This IS the Alberto! FG is better for heavy mono.

Mantep sekali cari ngiteket nya 👍👍👍

Very tidy , thanks

@FishingknotsChannel

Жыл бұрын

Youre welcome

Very very cool. I subscribed. First time I've seen a fishing knot channel haha. Just what I need.

Congratulation on lessen ur leader strenght

Seeing him wear gloves to tighten that is no joke. Tried it without and the braid went right into my skin

You got soft hands

Great Knot, but using a Flame is a NO NO from me....a flat faced soldering iron would be my choice to melt that small piece of mono...

I guess if your pass time is tying knots,..... I like to fish.

Knots master !!

for smaller reals, this does not work as the leader doubling back creates too much thickness. (gets snagged in the real spool guide and also drag through eylets when casting) The major problem with all these channels showing these knots is that they use thick braid and leader when in reality they are different. In my case, 0.2mm braid to 0.35mm nylon. Then the GT knot appears the best option.

.steady neat and strong👍✊

Pero si está hecho del revés, madre mía 🙈🙈🙈

I like that knot...

Нет слов,как хорошо!

my friend, you just reduced the knot strength with that lighter, not good friend

This is also called the San Diego Jam knot. Awesome knot regardless of name!!