Интересное кино.

very informative. I'm just a beginner. at 60 years old. Thanks for the video. it will help very much.

Good intel, liked your tone as well. Thanks for sharing.

Thanks man! You helped me a lot with my issues with my car.

exactly what i have now， thanks for information.! this helped me a lot,.

Nice explanation!

Very well Explained video, and a Very Important one !

Hey John, excellent presentation. Had my 1992 isuzu pickup 2.3l rebuilt two years ago. Ran great for a while. Then one day engine started this subtle, annoying vibration. It has continued to this day. Pulled timing belt cover off, notice tdc on crankshaft was 180 off camshaft arrow. Any help?

Where are you located..I need a good honest mechanic that knows what he is doing

Also consider balance shaft timing. Another thing, I've seen a flat washer accidentally dropped into a motor mount cause heinous vibration because it was jammed between the body side of the mount and the engine side. Twice in one week by two different techs.

Hi... i m having a Daewoo Gentra x which has S-tech 2 engine . after replacing the timing chain the engine is shaking . the machanics said timing of the chain is ok but still shaking .Please advise me what to do ?

Thanks john you have answered my question on why my car shakes so bad when i start it i did have my timing belt changed and then notice a slight shaking I've been changing my mounts just about every year and still have that shaking just comes back oh by the way i have a 95 ford escort and now because of your great video i'm going to take it to the ford company it self to have it put on the machine because they made it so they should be able to tell me what's wrong with it right lol a lot of the work that i could do my self i did but i didn't do my timing belt because i didn't know how to but now i do but i won't do it cause i dont want to mess anything up after i get it fixed so thanks again or your great help. Ms Felicia Macklin

@gregh7457

7 жыл бұрын

1995 ? don't you think the warranty has expired yet? It's time to get a new car. Thats an antique.

@DonVerchi700as

7 жыл бұрын

Felicia Macklin and I thought all of those cars where long gone!

@justyagyal9129

6 жыл бұрын

Nothing wrong with antique.. the old cars where built the Best... I dont Care for these new computerized plastic cars..just my preference

@rainsrapidly

2 жыл бұрын

Did ur car shake at the start of u turning it on and it stopped shaking after u started driving it? This is my issue

Hi Thanks I replaced new timing belt on s60 2005, but the belt not centred it moves asid about 0.9mm over camshaft drive. So what can be the problem? Any advice?

damn toyota dealer didn't torque the balancer to correct spec after a timing belt replacement and it ate the keyway in the crank on mine. Hello new crankshaft. I would have emphasized getting the bolt tight more than anything else.

@amymancil8854

3 жыл бұрын

Investigating my wobbling crank. Sounding like I may have a similar issue

Ok thank u... So if i got my timing chain replaced .. and the car started shaking 2 days later when i started it up but stopped shaking within 2 minutes... is that an issue too?

Can i adjust the camshaft without the belt on

Belt was put on wrong with timing marks not set correctly.

I have an VW POLO TSI 1.2 it was in for a camshaft adjuster recall.. after VW changed it my car runs rough at idle and jolts from front to back when taking of at stops or driving slow in(kinda like a bad clutch feeling) in traffic and now takes ages to accelerate. It was bought brand new is a manual and has only 1000kms on it, VW dealer says its "normal". taking it back again. When sitting on between 1000 and 2000 revs the whole car shakes a lot...like really a lot. A friend of mine sat with me in the car saying thats not right. It did not do this before it went in. . They seem to be hard asses about it. I just want my car to drive normal again as its new and wasn't cheap :( I don't want it to bend valves as the dealers are probably gonna blame me for it. Quick to sell a car but don't want anything to do with you when they mess something up. Im not an Idiot with cars I have some knowledge serviced my first car a lot, but not mechanic level but I know this isn't how a car must drive.

I know this video is old, but I just had my bf's parents friends shop who they have trusted for over 40 years replace my timing and you would think for such loyal customers and $4k worth of parts and labor, that they would do their best. Since I got my timing replaced, Head Gasket, both catalytic converters (subaru), and new flex pipe and welded middle to back of car exhaust system...I have had NO A/C when it was ice cold before that, heat shields are now rubbing or vibrating and I heard the ticking as soon as I got it back, but it would go away when it warmed up..everyone thought i was nuts and the engine wasnt shaking but it was and no one believed i could actually figure it out. When i noticed it, i filled up the oil tank bc i thought it was a rod knock, it seemed to stop it for one day and then it came back on every cold startup. I looked up on the car issues forums i belong to and ALL of the subie owners said if you didnt have it replaced, it would be a design flaw in the tensioner, but if you DID have it replaced, well then, its the shop that f***ed it up. Thank you for this insight.

Dear sir if all the mark is okay but still shaking how?

Hi what engine is it, please? Thanks.

Thanks John! good info,

@smittysmith4262

6 жыл бұрын

Rick Smooth my Mazda 626 2.0 manual transmission runs good when above 1500rpm when idling it wants to de feels like it's missing replaced timing belt if of a couple teeth would it make it do that

What about a 98 nissan pathfinder? The book says push the harmonic balancer onto crank snout, then tighten the bolt to 98 ft/lbs.. if you are telling me that is wrong im surprised my manual tells me to do it that way. Because you said "under no circumstance should i use the crankshaft bolt to install the harmonic balancer."

@simonwillgress

4 жыл бұрын

Tyler james I think he meant if the gears tolerance is extremely tight and you can’t push the gear on in the first place.

Hi there, my car feels like has no power after timing chain replacement and the engine is also vibrating, the mechanic told me that its because of the clogged cat convertor which I got checked today and has no cat issues, what could be the problem? The engine light stays on all the time. Thanks

@novicetrader5545

8 жыл бұрын

Could be that they didn't screw everything back in, or the teeth are misaligned. The power loss that you are describing is exactly what happened to my car, mechanic had to double check that everything was screwed in properly, that fixed it!

@gregh7457

7 жыл бұрын

Time for a new mechanic.

@erickcid7001

5 жыл бұрын

Navjot Sidhu what car is it

@dreadscott3079

Жыл бұрын

Did you ever get it fixed

I just replaced my timing belt on my 2005 volvo v50 t5. and when I started the car (cold start) it ran perfect for about 15 seconds but then when the rpms dropped down to 900 (idle) the rpms just started going up and down a lot and then like 5 seconds later the engine just shut off. So something is definitely not right

I have a nissan Xtrail which had a blown head gasket it was replaced but now engine is vibrating badly please help

@joshualester6952

6 жыл бұрын

Rodrick Chauke run compression test on the engine I've seen several head gaskets cause the rings to blow out. You wouldn't think so but I've seen it a couple times. AutoZone has a compression tester you can run or you can run one with an airhose. Either way just make sure you don't loose compression. I've seen it a couple times and people tend to just throw parts at it and not properly test the engine before attempting a repair.

@Diosesamor13

4 жыл бұрын

Buy a new car bro

Git my 03 tibby doing this got 207k miles bought with 78k never changed it but now its acting up.

What engine is that??

@banjohusky

Жыл бұрын

4age

I just had my timing belt replaced . and now my engine is moving up and down.. Could have the mechanic screwed up the mount? He was working on that area of my car. And my car didn't have that issue at all Which by the way , my car only had the p0647 code. He should have just changed the oil pressure switch and gasket.. But he repaired oil leak, and timing belt and then finally the oil pressure switch and my car is underivable now! Blinking engine light . vsa , engine moving up and down .. He said he didn't break my car! But , he did! He surely did! How is it I had one problem and now I can't even drive at all.

aazadansari708

4age Toyota engine

Camera is too far

Knowledgeable bit bruhhh.... What's going on with this breathing and swallowing and shit....?