For anyone looking to purchase these make sure you search for the upgraded version as the scales take into account the width of the track, the cheaper version requires you to add 20cm when you set the stop.

I used a vibrating saw to reconfigure the foam cutout in the original box. It now holds the assembled heads with 1 rail section, calibrated and intact.

@thelondoncraftsmanworkshop

2 ай бұрын

Apologies, KZread sometimes holds back some comments for some reason! Thats a great idea.... I have chucked my packaging already but I always get more. Good tip for anyone else buying these :-)

Just got mine, no instructions was a downside but all pieces are specific so don't take too long to figure it out. Calibration was not so simple using the rods so I had to mark a measurement control line and calibrate to that, but I do not have any other issues with them. A great buy

@Will_craig

2 жыл бұрын

Yea i found the same issue as well, using the rod I was still around 2.5mm off. Used a ruler to get it perfect. Not sure why its off maybe the width of the track?

Hi Ryan, got mine this week, superb guides, especially like having two stops, saves moving sheets and keeps accuracy spot on. Just buy! No brainer! 👍

@thelondoncraftsmanworkshop

2 жыл бұрын

Hi allan they are brilliant arnt they and it makes its so much better as they are dirt cheap! Such a bargain! Yep the 2 stoppers is fantastic too and all very accurate when they are calibrated properly 😁👍👍

I just got a set of these. Was thinking the same thing about the storage/breaking it all apart. NOT doing that. So, in spite of the nice foam thing it came in I will just make my own storage box for the main section assembled as you indicate. Thanks for the videos on these. Gosh, I had no idea how to properly put this thing together or how to use the thin rip capability. Excellent explanations.

I've gor the Bench Dogs guides and honestly these seem to be a better design. Particularly the stopper, the Bench Dogs stopper are a bit of a faff.

You say to make an initial rip to tidy the edge up but how do you make that a straight cut? I.e. how do you make that a nice straight edge to work for the rest of the cuts then?

@thelondoncraftsmanworkshop

Жыл бұрын

Just use the track on its own as close to the edge as possible without the guides 👍

Excellent video, just received my guides but struggling to fit the rail to the sliding head, any tips please

@thelondoncraftsmanworkshop

2 жыл бұрын

Thanks! What track have you got?

Seems an improvement would be having hex head (Allen head) screws on the rail brackets. Saying that the Woodpecker uses Philips too (for £500!) which seems a bit poo…

@thelondoncraftsmanworkshop

2 жыл бұрын

Yes using one tool for both would be better!

Have purchased several tools from banggood and never been disappointed. In fact my Chinese pocket hole jig (metal) is better than the Kreg (plastic) equivalent. The price of UK/US/EU manufactured tools is often far too much for the casual hobbyist who cannot claim tax relief. I usually make a box from MDF or a space in my kaiser foam lined drawers for those tools that don't live on the bench.

Hi Ryan what make saw table you have? Like the guides will be ordering .

@thelondoncraftsmanworkshop

2 жыл бұрын

Hi its a SIP 01332 I think 👍👍

@mohammedmughal5221

2 жыл бұрын

Thankyou

Mate, the parallel guide does it work with an Erbauer track saw?

@thelondoncraftsmanworkshop

Жыл бұрын

I havnt got a clue mate sorry

Thanks for sharing! Great price for an absolutely cracking looking tool! I've already got the Benchdogs UK version that I bought last year. Bit of a pain to calibrate, but I keep them set up and in a drawer. Think I paid £120 for them. I've also got the Benchdogs rail square, and I have to say it is much better quality than the parallel guide. I really like the stop system on the Banggood version, particularly the double stop option. 👍

@thelondoncraftsmanworkshop

2 жыл бұрын

I've heard benchdogs square is very good. Overall I'm super happy with these banggood p guides

Do these work/can these be made to work on Bosch and mafell rails?

@thelondoncraftsmanworkshop

22 күн бұрын

Im not sure tbh, is there anyone that can answer this??

Wonder if these would fit my parkside saw rails?

@thelondoncraftsmanworkshop

2 жыл бұрын

I'm sure they will, I do have a silverline track and will try that but unfortunately I don't have a parkside

Great video. Can you please include a link to the guides on Banggood. Many thanks

@thelondoncraftsmanworkshop

2 жыл бұрын

Hi just type in upgraded parallel guides, on the Banggood app 👍

Great video! Is the side scale appear on all the section or only on the first 2 section? Thanks

@thelondoncraftsmanworkshop

2 жыл бұрын

It's the first 2 sections I believe 👍

@adrianmack3

2 жыл бұрын

It's not necessary to have them go any further on the side, it's for narrow rip, the standard scale takes care of wider rips

Great video, Thanks for your review.

Mine arrived yesterday and luckily didn't have to pay any customs charges. The quality seems excellent but my only gripe is they came with no assembly instructions. So thank god for your video. I had to pause your video now and again to see how it all assembled. I only need to calibrate it now but I will do that through the week.

@thelondoncraftsmanworkshop

2 жыл бұрын

They are amazing! Full assembly video is coming tomorrow too 👍

@Argyll1000

2 жыл бұрын

@@thelondoncraftsmanworkshop I calibrated it today and made a wee box for it from OSB offcuts. I'm really impressed by it.

Can you get Imperial guide?

@thelondoncraftsmanworkshop

2 жыл бұрын

I'm.sure you can !

NOOICE!

Ordered today mate and become a 'contributing member'. Thanks for the video.

@thelondoncraftsmanworkshop

2 жыл бұрын

Amazing richard, thanks very much, really appreciated! I bet you cant wait for them to turn up! I used them on my 3m track today and they were amazing!

@Dickymint1000

2 жыл бұрын

@@thelondoncraftsmanworkshop Arrived today ~ ten days from China not bad at all

@thelondoncraftsmanworkshop

2 жыл бұрын

It isn't is it , probably quicker than if you bought them from woodpeckers! I have about 15 veiko hand tools now so it may be next Sundays video 👍👌

What about import duty, did you have to pay anything?

@thelondoncraftsmanworkshop

2 жыл бұрын

No, you can pay import insurance which is about 50p to give you peace of mind just incase

@Puresniper1000

2 жыл бұрын

@@thelondoncraftsmanworkshop Cheers just ordered one

Great video buddy. Gonna sell my festool parallel guides and buy these 👍👍

Ha! My 7 year old heard you say bollocks 🤣 daddy, what does that mean?

@thelondoncraftsmanworkshop

2 жыл бұрын

Ah soo sorry, I don't know why I left that in there! Apologies!!!!!

@craigcoe2804

2 жыл бұрын

@@thelondoncraftsmanworkshop No worries - her mum has said far worse 🤣 I told her it's a rude way to say 'whoopsie' 👍

@thelondoncraftsmanworkshop

2 жыл бұрын

I feel really bad, I'll make sure not to do it again 👍 happy Christmas 👍

@craigcoe2804

2 жыл бұрын

@@thelondoncraftsmanworkshop ah don't worry, she knows what she is allowed to say and not. I've heard similar in the playground from other parents! Have a great Christmas yourself 🎄🎄🎄

China may have given the world Covid, but they also gave us Bang Good tools. So they've balanced it out.

@thelondoncraftsmanworkshop

2 жыл бұрын

Hahaha I love it 🤣

Thanks for the video but ...... It took 20 minutes to show how they connect and you didn't actually make any cuts to show its accuracy/parallelism and no link to the site to purchase.

I get budget , price difference is not just about quality. The people working at woodpecker makes $25-$40 dollars an hour China worker $2-$5 an hour.

@webtheweb

Жыл бұрын

Yeah the nerve on them Chinese trying to score $2 an hour....

@52thephotoshop

7 ай бұрын

​@@webthewebthe average Chinese worker earns 20k USD a year and it's rising but Continue living in 2005 I guess