DIY, save money and give yourself a better fishing experience!
Жүктеу.....
Пікірлер: 27
@Buckboard2 ай бұрын
I used Simpson Strong-Tie 2 inch x 1-1/2 inch x 1-3/8 inch ZMAX Galvanized Angle brace. Saves all the fabrication.
@rogermadrange172410 ай бұрын
Excellent! Thank you
@autreyodom36072 жыл бұрын
Like the rubber washer idea.
@TeamTnA44
2 жыл бұрын
They struggle Use Teflon washers
@HotBuoyFishing2 жыл бұрын
It sucks you got all of that carpet up agains your tracks. I have a tracker and use Scottys in my Versatrack. I can mount my Scotty's right to the track and not have to deal with the sharp edges. Great DIY vid
@delstep22552 жыл бұрын
Thanks my brother
@LivingWisconsin
2 жыл бұрын
Thank you for watching!!
@davidhefner56683 жыл бұрын
Those will work great. I used 1" thick blocks of black HDPE for everything.
@LivingWisconsin
3 жыл бұрын
Good choice!
@vhype233
2 жыл бұрын
What's HDPE?
@LuisSanchez-lu4cu2 жыл бұрын
Speedy metals will cut all them to length. Worth it.
@LivingWisconsin
2 жыл бұрын
Thank you for the reply Luis! You are absolutely correct. It is well worth it. Thank you for watching!
@dmwil15 ай бұрын
You said you would put a link to those knobs from Amazon. I don't see it. Do you have the link or at least the size?
@maxwilson8253 ай бұрын
What size carriage bolts did you use?
@vhype2332 жыл бұрын
Love the invention. What about the driver side 🤔 it's tougher because of the wire cover. Another issue if you need longer screws there's no inlet to insert longer screws. You cannot go from front the because longer screws can't pass by the console
@LivingWisconsin
2 жыл бұрын
Thank you for watching as well as the comment! These work very well on the driver's side as well. You may have to adjust the layout of the hold down holes to suit your needs.
@davidhefner56683 жыл бұрын
The problem with Versatrak....not enough access holes.
@LivingWisconsin
3 жыл бұрын
I completely agree.
@TeamTnA44
2 жыл бұрын
Drill some
@joedarneal54092 жыл бұрын
More than one way to skin a cat , Good Job 👍
@LivingWisconsin
2 жыл бұрын
Thanks for the feedback and big thanks for watching!
@juliethao533 жыл бұрын
Can you put down the model number for the piece of aluminum you got?
@LivingWisconsin
3 жыл бұрын
Thank you for watching Julie! No problem: www.speedymetals.com 1/4" {A} x 3" {B} x 3" {C} Angle 6061-T6 Aluminum, Extruded-36" SKU: 61a.25x3-36
@juliethao53
3 жыл бұрын
@@LivingWisconsin Thank you. just checked out the site. Shipping is fairly high..
@LivingWisconsin
3 жыл бұрын
This is what I paid. You are correct in higher shipping. There could be a better deal out there. Overall..they have been reliable, decent inventory, good customer service, and acceptable delivery time. Good luck! Subtotal:$39.02Shipping (UPS Ground):$16.11Tax:$2.76Total:$57.89
Пікірлер: 27
I used Simpson Strong-Tie 2 inch x 1-1/2 inch x 1-3/8 inch ZMAX Galvanized Angle brace. Saves all the fabrication.
Excellent! Thank you
Like the rubber washer idea.
@TeamTnA44
2 жыл бұрын
They struggle Use Teflon washers
It sucks you got all of that carpet up agains your tracks. I have a tracker and use Scottys in my Versatrack. I can mount my Scotty's right to the track and not have to deal with the sharp edges. Great DIY vid
Thanks my brother
@LivingWisconsin
2 жыл бұрын
Thank you for watching!!
Those will work great. I used 1" thick blocks of black HDPE for everything.
@LivingWisconsin
3 жыл бұрын
Good choice!
@vhype233
2 жыл бұрын
What's HDPE?
Speedy metals will cut all them to length. Worth it.
@LivingWisconsin
2 жыл бұрын
Thank you for the reply Luis! You are absolutely correct. It is well worth it. Thank you for watching!
You said you would put a link to those knobs from Amazon. I don't see it. Do you have the link or at least the size?
What size carriage bolts did you use?
Love the invention. What about the driver side 🤔 it's tougher because of the wire cover. Another issue if you need longer screws there's no inlet to insert longer screws. You cannot go from front the because longer screws can't pass by the console
@LivingWisconsin
2 жыл бұрын
Thank you for watching as well as the comment! These work very well on the driver's side as well. You may have to adjust the layout of the hold down holes to suit your needs.
The problem with Versatrak....not enough access holes.
@LivingWisconsin
3 жыл бұрын
I completely agree.
@TeamTnA44
2 жыл бұрын
Drill some
More than one way to skin a cat , Good Job 👍
@LivingWisconsin
2 жыл бұрын
Thanks for the feedback and big thanks for watching!
Can you put down the model number for the piece of aluminum you got?
@LivingWisconsin
3 жыл бұрын
Thank you for watching Julie! No problem: www.speedymetals.com 1/4" {A} x 3" {B} x 3" {C} Angle 6061-T6 Aluminum, Extruded-36" SKU: 61a.25x3-36
@juliethao53
3 жыл бұрын
@@LivingWisconsin Thank you. just checked out the site. Shipping is fairly high..
@LivingWisconsin
3 жыл бұрын
This is what I paid. You are correct in higher shipping. There could be a better deal out there. Overall..they have been reliable, decent inventory, good customer service, and acceptable delivery time. Good luck! Subtotal:$39.02Shipping (UPS Ground):$16.11Tax:$2.76Total:$57.89
@juliethao53
3 жыл бұрын
@@LivingWisconsin where did you get those knobs?
@LivingWisconsin
3 жыл бұрын
The knobs were purchased from Amazon.