Great video! Looking forward to layering puff and metallic puff!

As usual, Angie, your details for testing are spot on! Thank you

@AngieHolden

4 ай бұрын

Happy to help!

I love when you do these videos. It is so helpful when you do the comparisons. Thank you.

@AngieHolden

4 ай бұрын

I'm so glad!

@katherine5587

4 ай бұрын

YES! 💯

Thanks so much for doing this, Angie! I’ve been wanting to try puff HTV for a while now.

@AngieHolden

4 ай бұрын

Good luck!

I needed this! I’ve been afraid to try the puffy htv! THANK YOU!

@AngieHolden

4 ай бұрын

Good luck!

Thank you for this video. I have not ventured into Puff HTV yet but now I am excited to give it a try.

@AngieHolden

4 ай бұрын

Enjoy!

This was very informative! I have tested different brands and loved your video! Haven't mastered puff and was wondering about layering! thank you!

@AngieHolden

4 ай бұрын

I have NOT had success with layering puff with puff. I have tried a few things and am just not happy enough with the results to post a video!

LOVE how thorough you ALWAYS are🙂👍

@AngieHolden

3 ай бұрын

Happy to help!

I love the first one you did, thank you. Angie ❤😊

@AngieHolden

4 ай бұрын

Yay! Thank you!

Wonderful video. Thank you for sharing. I love how you can try all the tools and share the results. I don't have all the presses that you have, so if my project failed, I would blame myself or the material. Thanks so very much. Now I know which ones to even attempt to try out! TyTy Ty.

@AngieHolden

4 ай бұрын

Happy to help!

Great tips on the Puff HTV.

@AngieHolden

4 ай бұрын

Thanks!

This is so helpful. Im new to this craft. I have Crgicut Easy press 3. Several videos ive reviewed have suggested Sisor easy puff. I appreciate your doing such a thorough comparison. I feel more confident. Iwant to make my granddaughter a shirt with the puff htv. Again thank you.

@AngieHolden

3 ай бұрын

Good luck!

Love you to always do comparison videos❤️

@AngieHolden

4 ай бұрын

Happy to help!

Great video. Thank you!

I have an HTVRONT auto press. I played around with it and got the Siser puff to work perfectly by removing the pad that came with it and putting in a wood cutting board. It worked perfectly!

@AngieHolden

3 ай бұрын

Good to know!

Great comparison, thank you.

@AngieHolden

4 ай бұрын

Thanks for watching!

Love these videos! Thank you!

@AngieHolden

4 ай бұрын

Glad you like them!

Thank you! I'm not surprised that it was Siser that you found to be best and I am really glad to know about the difference in the presses. I usually use my easy presses when I do stuff for the kids because of the size and the PIA location of my 15x15 traditional press and I would have been very disappointed with the results.

@AngieHolden

4 ай бұрын

Glad it was helpful!

Thank you for this test. You confirmed the same results I am getting. I tried HTVRont puff twice and couldn’t get it smooth with my easy press. Then it peeled after a few washes. I applied over a flocked HTV and same result as you stated-didn’t work. Thanks again for confirming it wasn’t just me😵‍💫

@AngieHolden

4 ай бұрын

Not just you at all!

Thank you so much for this video. Cut the Siser wrong setting!

@AngieHolden

3 ай бұрын

You're welcome!

Thank you, Angie

@AngieHolden

4 ай бұрын

You are so welcome!

Thank you!! Was so chicken to try this 😅

@AngieHolden

4 ай бұрын

Hope you enjoy!

thank you for doing this

@AngieHolden

4 ай бұрын

Hope it helps!

So glad I found this video. Im guessing the shirt your wearing is siser puff the puff on your shirt stood out so much that's what made me click on your video. Im glad I did. Thanks!

@AngieHolden

2 ай бұрын

Yep! It is the Siser puff version!

Looks like sister for the win. Thank you for sharing. This was excellent as usual, I love following you. My question is, you use the cricut auto press I have the HTVront auto press do you think I get the same results? What I mean is the results were that was crinkled or with lines?

@AngieHolden

4 ай бұрын

I have seen other people use it and also not get great results. I would say it would also be inconsistent.

Very helpful. Unfortunately, I listened AFTER I cut my puff project with the shiny side down. It weeded so easily. Thank goodness it was a simple cut. I am going to cautiously iron-on with the carrier sheet up and hope for the best in removing the carrier. Thank you!

@AngieHolden

Ай бұрын

Good luck!!

I love your nails!!

@AngieHolden

2 ай бұрын

Thank you!

Thanks so much for sharing, I really appreciate it trust your views.

@AngieHolden

2 ай бұрын

My pleasure!

Thanks Angie, I have bought the Siser Puff, but I have the Easy Press 2, so I am now hesitating to try. But, it would be for myself, so I will give it a try. I'll get my husband to press it for me LOL.

@AngieHolden

4 ай бұрын

You can try it! I just wanted everyone to be aware that it isn't easy to get right!

Tack!!!

Thank you. I have the brain texture with my sister. I'll increase the pressure

@AngieHolden

2 ай бұрын

YEP more pressure!!

Great video Angie! I am not familiar with some of those brands, but i know with Siser i've seen it where they press it twice, the second time without a carrier sheet for a few seconds to increase the puff. so you think the brands from amazon would benefit from doing that? thanks again for the great content!

@AngieHolden

4 ай бұрын

Actually tried it! Still like the Siser best!

Thanks. I have the HTVRont Autopress, did you try adding extra heat mats underneath to increase the pressure on your Autopress? I wish there was one-machine-fits-all! I may have to break down and get a traditional heat press to add to my machine arsenal.

@AngieHolden

4 ай бұрын

Any of the AutoPresses don't get much extra pressure with more mats. The benefit is that they apply the same pressure no matter what thickness your item is.

Thank you for this experiment!!! I have the auto press and it kept coming out “brainy looking” tried so many different temps and time and it kept coming out the same. Very frustrating. I think it’s time for a traditional heat press.

@AngieHolden

3 ай бұрын

Excellent!

Would love for you to try ours!

Thanks Angie. Curious have you tried the siser puff with the Cricut Auto Press?

@AngieHolden

4 ай бұрын

That is the one I show at the end of this video. It was not consistent no matter what I did.

great teaching video

@AngieHolden

4 ай бұрын

Glad you think so!

@MyNailsandMorebyJohna

4 ай бұрын

@@AngieHolden you are welcome honey

☺️ This is very gorgeous. I have a question please, how does it last with use over time? Does it flatten out and lose the puff? 😊

@AngieHolden

4 ай бұрын

I find that they do not really flatten out. The cracking is the most prevalent issue over time.

Can you show us how to do chenille patches please? Thanks

@AngieHolden

4 ай бұрын

You would just press those premade ones according to the directions. I have instructions on using flock to make something similar here: kzread.info/dash/bejne/aIuNytSMic2ac6Q.html

Have you tried on canvas totes? I’m having the darnest time getting my puff to puff on tote bags. Tried everything from heat settings to press time and different pressure. Works great on shirts but not tote bags I’m using

@AngieHolden

4 ай бұрын

It is probably the seams. They can hold the heat press off of your surface and REALLY mess with puff. Do you have a firm heat resistant mat you can put inside of the bag?

@Pretear521

4 ай бұрын

@@AngieHolden I did buy a heat resistant pillow to go in, I only tried it a few times, was frustrated by the time I decided to try using it 😆

@Skadivore

3 ай бұрын

I think the reason is also that shirt jersey is stretchy and will adjust to the puff. Canvas is stiff because of the way it is woven and won’t move with the vinyl to puff.

I love your nail polish! What brand and color is it?

@AngieHolden

4 ай бұрын

Sorry not sure! I just pick one at the nail salon!

May i ask what font you have used i love it.

@AngieHolden

4 ай бұрын

I am actually not sure! Sorry!

Siser easy puff has limited colours here in Cananda. I could only find black and white at Michael's

@AngieHolden

4 ай бұрын

Michaels does not carry much puff. You might look online for others that can ship to Canada.

Can we lay puff on top of glitter ? Or we just use the offset as the outline and the puff is inside?

@AngieHolden

4 ай бұрын

Layering anything on glitter is tricky. It is hard to get it to stick.

What brand press do you have in the first press example - white and red

@AngieHolden

4 ай бұрын

It is the Siser heat press.

Thank you. What’s the name of the font and where did you get it?

@AngieHolden

4 ай бұрын

Sorry not sure!

My new maker 3 is cutting through my HTV on just one side, I've tried editing the cutting pressure but it does not change. Do I have a defective unit?

@AngieHolden

2 ай бұрын

Yea that doesn't sound right. Maybe try contacting Cricut.

What do you do with those puff shirts in the video that don’t turn out?

@AngieHolden

4 ай бұрын

Any "oops" type of things in videos get donated if they are usable at all. These are probably something someone would wear so I would donate. If they are not something that someone would use, I would probably use the fabric as a rag.

Can you make a video for puff htv without a cutting machine??

@AngieHolden

4 ай бұрын

I guess you can cut it with scissors but the rest of the steps would be the same.

@terrybarnhill8451

4 ай бұрын

Thanks can’t afford a Cricut yet

What font did you use for the words "Home Body"?

@AngieHolden

12 күн бұрын

Sorry not sure.

I cannot find the files you linked to in the video. It just goes to your page, but no files. I even tried a search.

@AngieHolden

4 ай бұрын

Get the free cut files here: angie-holden.ck.page/699f24988c

What font is the homebody ?

@AngieHolden

4 ай бұрын

Sorry not sure! I do have the file for free below this video.

What did you think of Cricut puff vinyl?

@AngieHolden

28 күн бұрын

Cricut does not have a puff HTV at this time.

so if the puff it ruff.........(no pun intended) it was left to press to long?

@AngieHolden

2 ай бұрын

If it is rough, it is not enough pressure most likely.