The best epoxy skull you'll ever make
Тәжірибелік нұсқаулар және стиль
In this video I will go over the steps I take to make crystal clear resin cast skulls with objects in them.
Etsy store
www.etsy.com/shop/ByromsCusto...
Resin gear- www.amazon.com/shop/influence...
Use code byrom10 for 10% off at seefinishes.com/
Pigments I use
blackdiamondpigments.com/byro...
Aftermarket drill tool batteries I use
www.vanonbatteries.com/?ref=K...
Beard care
copperjohnsbeard.com/?_ga=2.2...
Пікірлер: 70
Great to hear you admitting that the problems with the molds are due to you & not a problem with the mold itself. As for clearing the surface bubbles the best method I've come across is by using a long neck lighter, the flame temp is much lower than the heat gun or the torch & so it takes MUCH, MUCH LONGER to cause any damage to the mold & the other thing is that using IPA will dry the silicone mold out & shorten it's life so that's why I avoid using IPA to burst bubbles.
The bubbles around the eyes and nose actually look kinda cool
I think one of those big skulls with a single 30 sided die would be pretty cool. Thanks for the video!
Thanks for sharing your knowledge 👍🏼
You are the first person I have seen using my favorite resin. I love the liquid glass deep pour and liquid glass 24.
Great video, thanks!
Great video thanks a lot, couldn't catch what kind of tape you used on your inserts?.
This had some of the best tips I have seen. I have never seen the pressure pot and I would love to have the measurements to make the tray you use to make the tray that drops in beautifully.
I do mine using gravity and no pressure pot. I fill mine with polished agates... Bubbles are minimal and they look beautiful.
wow these are amazing!~ tho im waiting to see more videos of your poured resin molds etc...thanks for the videos!
Just wanted to thank you, I bought the pressure tank. It works great so thank you
@byromscustomwoodworks
3 ай бұрын
Great to hear!
Can you recommend a different mold release? The one you have is no longer available.
Would you Recommend attempting this with 1-1 instead of deep pour With brass inside. Without pressure pot-- Thanks
How do you get your brass so shiny? Do you tumble it? Thanks for sharing
Nice skull
Do you leave it in the pressure tank for the 3 days? What happens if you wait 5 days, does it hurt the mold?
Just found out you had a KZread. 100 in a month is awesome! Definitely some serious potential. Have you thought about expanding to other object than just skulls? Also new one with the bora bora blue looks sick
@byromscustomwoodworks
Жыл бұрын
I have been thinking about doing a few different things just haven’t landed on one I think is cool and will sell
Spray the inside of the mold with alcohol right before you pour it helps release those pesky low down bubbles.
I am confused what and when you use the rubbing alcohol to pop the bubbles. Thank you
Where do you order SealFix?
how about one with dried flowers >.>?
Can you make bullet skull mold without a pressure machine Or would that be to much resin being poured at once Thanks love your videos
@byromscustomwoodworks
Ай бұрын
Yeah you can. The pressure pot is only needed to reduce and remove bubbles
Just use a vacuum pot, quickly on the resin, before pouring it into mold, then pour slowly into mold, and put in pressure pot. should eliminate any bubbles.
@byromscustomwoodworks
2 ай бұрын
If it was just resin in the mold that would work great
Awesome. What pressure pot do you use?
@byromscustomwoodworks
Жыл бұрын
I use the California air 225c
Would be cool with a lightening bolt
what are pressure pots and what are they for/ Is it to help set the Resin up faster?
@byromscustomwoodworks
2 ай бұрын
They collapse the bubbles in the resin so it comes out clear
I’ve heard 24 hours is sufficient in the pressure pot. Have you compared different time-lengths in the pot to see if there is any impact on the product?
@byromscustomwoodworks
Жыл бұрын
It’s still in a gel state at 24 hours so it’s safer to leave them in for a minimum of 48 hours.
Do you buy your spent shells, or do friends save them? I am looking for some place to get some. Thank you
@byromscustomwoodworks
Ай бұрын
I buy them by the 5 gallon bucket.
Do you clean the brass casings with anything?
@byromscustomwoodworks
Ай бұрын
I use a vibration polisher with crushed walnut shells and metal polish
can i buy the bullet shells online ? where do you find them ?
@byromscustomwoodworks
10 ай бұрын
I get them from local ranges. Can't find them free anymore so I usually pay around $3 a pound
Do you have a certain place you buy your 9mm casing
@byromscustomwoodworks
Ай бұрын
I buy them from a local range. I fill a 5 gallon bucket and it’s everything from 9mm to 45.
Can you reuse the syringes?
@byromscustomwoodworks
10 ай бұрын
I get 2-3 uses out of them before the rubber is trash
How did you do that 2 tone skull you posted on your Instagram?
@byromscustomwoodworks
Жыл бұрын
It takes 2 pours. Let the first one gel up then pour the 2nd in what ever color you want
Snow globe using circular mold hmmm thinking here lol
Where do you buy empty shell casings?
@byromscustomwoodworks
Жыл бұрын
I go to local firing ranges and buy them
@jodir9984
Жыл бұрын
@@byromscustomwoodworks oh okay. I will have to look into that. Not to necessarily do this, but you gave me a great idea for some jars and trays.
@MissGlenda1965
Жыл бұрын
Whats the link to your store?
@byromscustomwoodworks
Жыл бұрын
@@MissGlenda1965 www.etsy.com/shop/ByromsCustom
May I ask how heavy it is?
@byromscustomwoodworks
6 ай бұрын
About 2 pounds
How big are your molds?
@byromscustomwoodworks
3 ай бұрын
About the size of a baseball. They hold 11 ounces of epoxy
Can you show me a link to your store
@byromscustomwoodworks
Ай бұрын
It’s In the description for the video
How many grams or mls does that size skull take to fill?? xx
@byromscustomwoodworks
Ай бұрын
It’s roughly 11 ounces of epoxy to fill them
Great video , nice explanations! For what it is worth you made a Subscriber out of me!
Why pressure instead of vaccum ?
@byromscustomwoodworks
Жыл бұрын
Less steps and less chances of a mess. And a pressure pot does just as good of a job
I dont see why the bullet shells dont like stick out of the eyes and mess it up .Would be my luck
@byromscustomwoodworks
Ай бұрын
I’ve had a few that have done that
I vibrate my molds and all the bubbles disappear..
@byromscustomwoodworks
Ай бұрын
That works but you can still have micro bubbles
I seem to get a lot of bubbles on the back of the head, how can I prevent that?
@lisab2437
9 ай бұрын
Alcohol spritz should help. Also torch and proper Mixing time. It also depends on your choice of resin. I have this exact same mould, from let's resin...the skull is awesome...I get bubbles in the back of the skulls head...