My thoughts as a total novice on getting into spraying. I decided to get into spraying and purchased the excellent Graco GX21. Has it been plain sailing? No! My sprayer arrived complete with a 15M hose, that's got to be a good thing because it's huge, right? Well, not really. One of my first jobs was a two bedroom apartment but it was small. Having a huge hose caused problems, although they were problems of my own making. I would spray a room and start at the wrong end so I ended up smudging the paint with the bloody hose. My fault of course but it wasn't something I considered until I messed up. Get a shorter hose and a whip, you will not regret it. Oh, get a hopper. It's worth it just for how easy it makes cleaning the GX21. If you're asked to quote for a job go over it with a fine tooth comb, don't consider quoting if the plastering hasn't been completed. I've recently completed a job where the plasterer had a left a build-up of plaster on every skirting board and door frame. Trust me, it's a swine to remove by hand and very time consuming. This will sound stupid to many people but consider masking your lovely, expensive sprayer. I didn't and it's now white and looks crap. Two minutes of masking keeps it looking like new. On the subject of masking, when you first start you will probably be slow and even struggle to cut masking film with your hand masker. Stick with it, you will get faster with experience and one day be as quick as Pete! Finally, watch Paint HQs videos, literally everything that I know is due to Pete's fantastic tutorials.

@PaintHQ

Жыл бұрын

Hey Stephen, great to hear from you.. I really appreciate your input, wise words and kind support.. hope you’re keeping well.. regards Pete 🙏

Great work again Pete.

@PaintHQ

Жыл бұрын

Thank you Steve, very kind of you 💙 ..regards Pete

Hi Pete, you got me again! Looking at a new gun now.😀 that must be the tidiest shed I’ve ever seen. Thanks Allan.

@PaintHQ

Жыл бұрын

Hey Allan., haha treat yourself my friend, you deserve it... trust me, it’s not always so tidy 😆 ..all the best my friend, regards Pete 💙

Solid work, Pete can't go wrong with graco gear 👍👍 saludos..

@PaintHQ

Жыл бұрын

saludos y gracias mi hermano 💙

Hi Pete, like Alan also looking at the compact gun now, another great video

@PaintHQ

Жыл бұрын

Hi Tony.. ah you won’t regret investing in the PC Compact gun, it’s a genius design how it fits in the hand.. keep in touch, I’d love to hear what you choose and how you get on 💙 regards Pete

I'm loving the pc compact gun in the new gxff cordless. Hard to see me using anything else now Pete. Graco have nailed it with these guns. Great video at always 👌🏻 💙⚡

@PaintHQ

Жыл бұрын

thank you, as always appreciate your feedback and support 💙

Great job pete,the staircase looks fantastic some cool colours there,the pc gun is great as its so light and less fatiguing,graco are at the top of their game when it comes to spraying in my opinion

@PaintHQ

Жыл бұрын

Hi Eddie, yeah it was a pleasure to prep and complete.. 100 year old woodwork, lots of sanding, filling TLC 😆 ..The colour choices were all the custoner, very good choices, I was a fan too ..thanks for your kind feedback, I agree.. Graco develops and produces innovative, industry leading technology 💙 ..all the best my friend, hope you’re keeping well 🙏

Love it Pete bless 👌🏾

@PaintHQ

Жыл бұрын

Ah my brother, thank you 🇯🇲💙

Love your channel Pete! It’s the music that really does it for me. Where can I find a playlist that’s curated by you?

@PaintHQ

Жыл бұрын

Hi James, thank you so much for the kind words of support.. very much appreciated.. keep in touch my friend, regards Pete

Hello Pete, I’ve watched a few of your videos, and I must say they are very helpful, I’ve been decorating for 45 years, and only done occasional spraying jobs, but I do love the finish they give, so I’m starting to do more of them, I am a subscriber, so look forward to your videos 👍

@PaintHQ

Жыл бұрын

Hey William, you’re so kind, thank you my friend.. feel free to reach out if I can offer any help or advise 💙 ..regards Pete

@williamstyles6491

Жыл бұрын

@@PaintHQ thanks for the reply Pete,much appreciated 👍

@PaintHQ

Жыл бұрын

You’re very welcome my friend 🙏 regards Pete

Excellent video, and thank you for showing the comparison between the two guns. You've earned a like and a new subscriber:) Question: spraying primer on doors and trying to reduce overspray. Using a black Graco 4-13 still getting tails at 2500. My 5-15 seems like overkill for doors. My FFLP 3-08 is good for finish, but the primer is my problem. Do you have a suggestion?

@PaintHQ

Жыл бұрын

Thank you so much for the kind words and support.. regarding spraying primer, your thought process to get the balance of atomisation / pressure / fluid flow is spot on.. you’ll see in a lot of my videos I’m a fan of FF LP .008 tips, which works awesome for the low viscosity waterborne / spray only primer / topcoat that I’m a fan of.. I spray a high build that still atomises awesome through a 208 / 308.. so your primer is much thicker is it? Vs your topcoat ..if you’re still getting tails with a black 413 (TrueAirless) at 2500, you’re right to think the tip orifice size needs to be upped.. if you have a 515 to test on paper (not on the doors), it will give you an idea on orifice size to see if tails are eliminated.. if so, you could stick to a .015 size or try a .014 (very similar).. if you’ve got the RAC X tip guard, I’d go with an FF LP ..Or go back to the 413 and thin the material.. again test a bit so you’re not wasting your precious paint.. I don’t like to thin trim paints but it could be worth it, 10% max, with this primer.. if waterborne, you could use warm water / and warm your paint.. all helps the flow 😆 Sorry I don’t have a definitive answer, but credit to you, you’re thinking very wisely.. it’s just getting the balance right, and spraying at the lowest possible pressure to minimise overspray.. Keep in touch, great to have your input on the channel.. happy to help if I can.. regards Pete

where do you get those graco boxes that look like festool ones ? like your vids mate 👍

The ceiling paint got mixed in the end I see my friend 😂😂💯

@PaintHQ

Жыл бұрын

Haha, yeah all sorted.. it’s not often you hear me swear 😂

I need to get those contractor pc guns.. Big one for my 395, small one for my gx19. I keep saying oneday lol but I'm always buying other stuff. 😆 I liked the wall color in the video!! Not sure about that ceiling color tho. Looks good from my house 🤣

@PaintHQ

Жыл бұрын

Haha yeah I know what you mean.. you’ve got a good setup in those 2 Graco units.. the wall colour is matched to a Farrow and Ball colour.. “Green Smoke”.. Great to hear from you buddy 🇺🇸💙

Pete, perfect videos & sound blend (as always)! Please use gloves with Elbow Grease. Just as you always use a face mask, you should look after your hands too! Elbow Grease (which you have recommended to me earlier) is a strong degreasant that does no favours to your skin. Having tried Elbow Grease, I've switched to Non-Nonsense degreaser 5L from Screwfix. It works better but does need a spray bottle...

@PaintHQ

Жыл бұрын

Hey Dmitriy, thank you so much for the kind words and the heads up.. you’re right.. I’ll be sure to look into your recommendation 🙏 take care my friend.. regards Pete

It's certainly nice to watch a real professional paint. I am a retired DYI guy that mostly paints interior and exterior trim and baseboard (Acrylic Enamel) with a Graco Magnum X5 airless. while the X5 gun is OK, I never liked the RAC IV spray tip selection. Is it possible or even plausible to use the Graco Contractor PC Compact gun on my Magnum X5? I would like to use the LP FF tips; however the RAC IV does not seem to offer those sizes. Thank You

@PaintHQ

4 ай бұрын

Hi Mark.. that’s very kind of you to say - it’s great to hear from someone with a wonderful enthusiasm to spray projects into retirement 💙 I’ve just looked up the X5, the gun / tip guard thread is a standard 7/8”, so it is possible to swap out to a RAC X tip guard and tips (I believe the X5 max tip size is .015”).. also the hose connection is a standard NPSM 1/4”, so yes a swap out to a contractor gun is also possible 👍 ..Hope this helps, please keep in touch it will be great to hear how you get on.. regards Pete 💙💯

Hi Pete. I'll take the big gun. You make work look like anti-stress therapy. Best regards.

@PaintHQ

Жыл бұрын

Haha thank you Enrique 😆 ..hope you’re keeping well my friend 🙏

@EnriqueJavierRodzRodz

Жыл бұрын

@@PaintHQ as always. Same to U.

I use a pc but been wanting to get a pic compact . Just the price brother . Gosh it’s crazy . Cheapest I’ve found is a little under 300 and all the way up to 600 . Do you know where to purchase at a better price

That Graco compact looks like a good gun. I've been using a Silver Plus gun for a few years (nice gun), but recently I found a gun by ARO on eBay for $25. I'd never heard of these guns but it's the best gun (by far) that I've ever used. The pressure is butter smooth and it has the lowest pull pressure of any gun I've ever used. The trigger lock is in the back where it should be. The downside is these guns cost $800-$1K dollars and that's probably why we don't see these guns used much. If you come across one for dirt cheap pick one up. You'll be glad you did.

@PaintHQ

3 ай бұрын

Thank you my friend, I really appreciate you reaching out and sharing your experience.. keep in touch, will be great to hear your thoughts in future.. Ps Graco is releasing a ‘genius design’ airless spray gun.. I believe marketing material is being shared in North America right now (or very soon).. I’ve just viewed a presentation in Europe / EMEA ..we have a little while to wait yet - it’s all very exciting 💙💯 Regards Pete

Nice to see you running the woodwork-> walls -> ceiling approach. There’s always an element of discussion on what is the order to spray. Ceilings, woodwork then brush and roll walls is another favoured approach but then I’m putting my sprayer away too early!! How are you dealing with spitting out of the extension without a clean shot. Is that simply technique. Triggering just off the surface? Cheers

@PaintHQ

Жыл бұрын

Thanks for your feedback, appreciate your input.. yeah my favourite is all sprayed, like you I enjoy the spraying process and the finish and sharp masked lines are mind blowing.. I can appreciate the reasons for a roller / back roller finish.. on all my jobs the minimum is spray is woodwork and ceiling.. a possibility for me is to spray woodwork, then mask and brush / roll up onto the ceiling (no cutting in), then on the last day mask the cut line and spray the ceiling.. you may not save a day labour, but it’s less labour intensive on the body, each step is quicker, the finish is flawless and yeah the ceiling cut line is razor sharp.. a HSL is a good example of spraying, masking the ceiling cut line is easier to navigate than manoeuvring a ladder, going up and down.. on this job I didn’t use a ladder I could spray off the landing up onto the ceiling, and I could reach and push the masking round (if that makes sense).. then all the masking pulls down from the ground at the end, it’s very satisfying 😆 ..you’re right I trigger off / on, hitting the masking 👍 ..although I find the small 25cm / 10” extension doesn’t produce much / if any noticeable spit 😆 ..I do sometimes use a Cleanshot 💙 ..really appreciate your input and contribution on PaintHQ buddy.. regards Pete

@xxnonstopdancingxx

Жыл бұрын

@@PaintHQ not as much as I appreciate the time you spent on that reply, as well as your videos, really useful and inspiring. 👍

@PaintHQ

Жыл бұрын

You’re so kind, thank you 💙

Do they sell conversion kits? I have the compact. It’s great for spraying stationary. But once I get moving with it from side to side and different angles the hose swivel always finds a way to pinch the side of my hand.

@PaintHQ

18 күн бұрын

That’s a very good question and a very good idea.. I’m pretty certain that they don’t - thinking bout it, there is a difference in the ‘trigger assembly’ because the PC cartridge has a different part numbers for the compact Vs regular contractor PC.. plus the trigger and guard has it’s differences.. it is a good idea though 👏👏👏 on the note of the ‘problematic’ swivel / pinching your skin ..I believe it’s a ‘known issue’ (in some cases) and a modification is planned for future releases 👍💙💯 all the best my friend.. keep in touch.. regards Pete

Need to see finished hall stairs and landing . Uk

@PaintHQ

Жыл бұрын

Hey Glen, I have more footage for a future video.. leave it with me 🙏

Hi Pete, I have a oak staircase that a customer wants painting black I'm thinking of using otex akva gor the primer and everal aqua 10 as the top coat. I've never tried any of tikurillas products so wanting to give them a go. I'm wondering if there is any way of getting some samples from tikurilla to try

@PaintHQ

Жыл бұрын

Apologies for my delayed reply my friend .. did you get to try Tikkurila? ..regards Pete

@marsdencarl89

Жыл бұрын

@PaintHQ hi Pete, no problem 👍 yes I used the otex akva and everal aqua 40 mixed to black it sprayed lovely and because it has enamel it dried rock hard

@PaintHQ

Жыл бұрын

Ah great news, glad it all went well 💙

How much time you let the wall paint dry before masking the walls? Thank you.

@PaintHQ

Жыл бұрын

Thanks for your question.. it’s the next day that walls can be masked.. This is the low tack masking tape that I use by Kip.. www.amazon.co.uk/Kip-221634-Fineline-209-23-Lilac/dp/B06XKKZ4GY/ref=mp_s_a_1_5?crid=2G3DFM2C6RR87&keywords=kip+masking+tape&qid=1679841221&sprefix=kip+masking+%2Caps%2C105&sr=8-5 Then I use a 2.6m Pre-taped plastic film also from Amazon.. Kip Washi-Tec 232 Film (2600mm) Hope this helps 🙏 regards Pete

Them graco sprayers are only 110 volt, are they practical to use in the UK?

@PaintHQ

Жыл бұрын

Good question my friend.. it’s a 110v CE kite marked Graco unit, so all good on safety / UK warranty and service ..It is a pain carrying the (heavy) 110v transformer, the advantage is you’re covered for site work.. a 240v mains corded unit is less to carry.. a Graco Cordless Sprayer is even better 😆 ..my opinion, the future 💙⚡️ ..Thanks for your input.. keep in touch, regards Pete

Hello Pete how's you ? seeing you contractor gracco gun dirty with paint made me feel better about my self. usually on your videos they are spotless, i been founding my self looking more and more on HVLP and i seen on SpraymanUK a deal with a compressor gun etc etc which made think in what is your thoughts about it? i was looking on the wagner 5000 but not quit sure what to do know as that deal in SpraymanUK sounds more appealing. the other is the gracco 7500 but is getting out of the budget.... i just wonder because i saw you using all the ones i mention if you have to stick to 1 option what would you do. i realized gracco is coming up with a new sprayer but for what i understand is on the £2000s which is not cheap i must say. have a good Sunday afternoon

@PaintHQ

Жыл бұрын

I do rate a conventional airspray / HVLP setup.. you’re not limited to the air and the passive setup when using a remote pot.. unless you add a compressor to a turbine setup or go for the Graco 9.5 ProComp, .. that would be my choice of a turbine, but I can appreciate the cost and investment.. with a compressor setup, it’s not as portable as turbine, but you can run a long airline and have the compressor in another room.. so a turbine is portable but the airline is thicker and not as flexible (if spraying uPVC for example and maybe working off a ladder).. I’d rule out the XVLP, that’s by no means a slur on Wagner, I wouldn’t do that.. it’s just not in the same league as a compressor airspray / turbine HVLP .. one more thing on a compressor, if you already have airless.. you could take another step in future to Air Assisted Airless 👍😆 The upcoming Graco QuickShot, firstly is a professional airless unit that’s extremely portable.. I was fortunate to field test in the UK, and being released I’m super excited what this unit can deliver and I can’t wait to showcase why I believe it’s a cordless unit worth investing in Have a chat to my friend Mike at SpraymanUK, he’s a great guy, super knowledgeable and won’t pressure you to make a purchase.. mention me (Pete) and he’ll steer you right 👍 Keep in touch, I’d love to hear what you decide and I’m more than happy to help and advise more if I can.. regards Pete 💙

@flaviokepista9086

Жыл бұрын

@@PaintHQ Pete thank you for your replay, i did look on the gracco 9.5 with the pot but as mention price tag is high(i guess is a case you get what you pay for) this is no different then my gx21 i absolutely fall in love with the bloody thing ,i was quite reluctant in to buy it because of the price tag but know i'm so glad i did it and haven't both a cheap one. bottom of line i need to decide if the work is coming up if justify the investment . i also been looking on a battery powered but seeing videos of th quickshot is making me wait a bit longer because i think will wort it. i will speak with Mike and exchange some thought wend i more ready for it as i don't wanna waist anyone time. is a difficult because the compressor i can buy locally however the deal mike had seemed to me quite good. thank you for your help 🙂

@PaintHQ

Жыл бұрын

You’re very welcome, I can appreciate your dilemma and having a budget.. you have invested wisely in the GX21 💙 ..The upcoming release of the Ultra QuickShot is something I’m very excited about.. it’s a great addition to the cordless range.. I can vouch for the research and how Graco listens to custoner feedback to develop such innovative technology.. I’m confident the Ultra QuickShot will be a great investment for anyone in the Paint Contractor / P&D market.. I can’t wait to showcase the unit soon 💙 ..regards Pete

Hi Pete, just wanted to share my experience with the newly-purchased Graco Contractor PC Compact gun. You have not mentioned the problem I have and I wonder if it is just me (of a sort). This gun has this weird sheath near the swivel nut that allows the skin of my palm to get caught between two moving metal parts and pinch it quite painfully. Have you had such a problem?

@PaintHQ

11 ай бұрын

Hey Dmitriy, thanks for your feedback on the Contractor PC Compact gun.. no I haven’t experienced that problem myself, I will ask others though.. it’s an interesting scenario 🤔

@dmitriyl4177

11 ай бұрын

@@PaintHQ I've been in touch with Graco and they have confirmed that they had this issue in "small number of cases". Lucky me, I suppose. Nevertheless, they told me that a modification was made to address this issue and having checked my serial number they have sent a new gun to me. Upon visual inspection, it looks 100% the same as the one which gives me problems; will try it in action to see if it is just my eyesight that is not seeing the difference...

@PaintHQ

11 ай бұрын

Ah cool, interesting to know.. let me know what you discover my friend 🙏

What was that you were using to clean your gun at the beginning?

@PaintHQ

Жыл бұрын

It’s just a cheap household degreaser called “Elbow Grease”.. it’s one of the most effective cleaners I’ve used, also in preparation of jobs.. here’s a link to Amazon 👍 www.amazon.co.uk/Elbow-Grease-Original-Purpose-Degreaser/dp/B07HRWGWWB/ref=mp_s_a_1_3?crid=NGXN1B6TTLZO&keywords=elbow+grease+spray&qid=1681108920&rdc=1&sprefix=elbow+gre%2Caps%2C120&sr=8-3

What’s the floor covering you use mate

@PaintHQ

Жыл бұрын

Hello my friend.. it’s this floor fleece, great quality, plastic backed and can be rolled up and reused.. great value too, 25m roll 👍 For stairs I fold it in half and tack in the corner of each tread / riser.. just with a Kip Crepe tape, kind of like how stair rods would work 😆 ..it’s quick and handy in an occupied property, I can fetch up and leave clean and tidy at the end of each day.. www.amazon.co.uk/gp/aw/d/B06XJ7PYD4?psc=1&ref=ppx_pop_mob_b_asin_title

Hi Pete, it’s been a while - I hope you’re keeping well. I have a quick question: I’ve been using Tikkurila Optiva Matt 5 for walls for ages now, probably because I hate change (!) but their recent price increase had me looking around and I noticed that, on a number of recent videos, you are using Johnstone’s Acrylic Durable Matt. It seems to be a of the price of Tikkurila! Have you found any drawbacks with it? With thanks and best wishes, Rob P.S. I loved Stephen Ryan’s post that you pinned!

@PaintHQ

Жыл бұрын

Hey Rob, great to hear from you.. yeah I’m doing great, hope you are too my friend.. very good point, it’s a reason I switched to Johnstones, along with Brewers being my local trade store and I rate the colour matches.. I’ve also been a fan of Albany Durable Matt, but I do prefer Johnstones being an acrylic.. basically I’ll thin Johnstones 10% with warm water, it really helps ease the flow, especially with it being a very thick emulsion, so you get 5.5 litres out of a 5 litre can 😆 (Tikkurila being 3 litre / 2.7 litre ☹️).. performance, scrub rating and matt finish is excellent, up there with Optiva in my opinion.. plus both companies are owned by PPG, and I’ve seen the odd Tikkurila exterior product appear to cross over to Johnstones.. as for price, you’re right Johnstones can be very cost effective.. especially if you have a word with your Brewers account manager (if a Brewers is local to you).. Optiva Primer (acrylic) for fresh plaster is cost effective, otherwise I mix a Johnstones acrylic durable matt 30% for a mist coat 👍 Hope this helps.. thanks for the kind words of support 🙏 Keep in touch.. regards Pete

@amanfriday3141

Жыл бұрын

@@PaintHQ Hi Pete, many thanks for taking the time to give such a detailed reply. Your reassurance is very helpful as I’m always nervous of suggesting a new product to a client. Using warm water is also something I’d not considered. I might be fortunate in also having a local Johnstone’s store in addition to Brewers! Once again, many thanks and best wishes, Rob

@PaintHQ

Жыл бұрын

You’re very welcome Rob, anytime my friend 🙏 ..Another thing I do, if the client wants to pick a colour off the F&B chart.. i’ll explain what I’m doing, and get the tester mixed at Brewers in Johnstones (not the F&B tester pot).. they’ll mix a 500ml of Johnstones Cova Plus, it’s around £5.. that way customer is able to see exactly the colour 👍

@amanfriday3141

Жыл бұрын

@@PaintHQ Many thanks Pete, are you just using the Cova Plus for the tester? Meaning, once the client is happy then you would get the Acrylic Durable Matt tinted to the same colour? Thanks and best wishes, Rob

@PaintHQ

Жыл бұрын

Yes my friend.. at Brewers when you ask for a Johnstones tester it defaults to Cova Plus, so you get the colour but not the sheen 👍 ..let me know how you get on buddy 👍🙏

Hi Pete how do you rate the graco LP tips against the HEA tips cheers

@PaintHQ

Жыл бұрын

Hey John, that’s a very good question.. what I find is the HEA tips can be a much courser atomisation Vs Graco LP tips, that atomise very fine, producing a softer edge to the fan.. I’m sure there’s an engineering explanation for how the material is broken up under pressure.. certainly all paints behave differently, going on their pigmentation and quality.. I find it all very interesting 💙 ..great to hear from you again, hope you’re keeping well my friend.. regards Pete

@johnthemod71

Жыл бұрын

@PaintHQ thanks Pete I have just got a 440 impact very happy with it I use HEA tips all the time only because I have been using a wagner 250r that only has a top end of 1500psi but now I can try different tips and see the difference between them thanks for your reply mate cheers

@PaintHQ

Жыл бұрын

Ah I see.. what size tips do you typically use?.. I’m confident you’ll be impressed with Graco tips, the low pressure achieved in fine finish spraying (FF LP), has been up to 50% less in some of the tests I’ve carried out.. you’ll need a 7/8” Graco RAC X tip guard.. I have spares, never been used, I’d gladly pop one in the post for free if you wanted to email me your address.. painthq.mail@gmail.com Regards Pete 💙

@johnthemod71

Жыл бұрын

@PaintHQ I've used the FFLP tips and they are spot on my little pump had enough pressure for them but not the LP tips I typically use a 5:17 hea for walls and a 210 FFLP for woodwork cheers mate

@PaintHQ

Жыл бұрын

Thanks for the info 👌👍🙏

They spit a few droplets of paint when you press the trigger. I haven’t found a way to fix that. Definitely not the right tool for fine finish.

@PaintHQ

Жыл бұрын

If you’re getting a spit when triggering on (Vs triggering off), it could be the gun packings / or cartridge swapping out of its the Contractor PC .. Or the gasket / seal needs checking in the tip guard (should be the smaller orifice gasket if using LP / FFLP tips ..if it’s the bigger orifice gasket that’s used with PAA tips, that could cause a spit like you describe.. hope this makes sense my friend 😆 ..regards Pete 🙏

Oooo, how's that for timing 😂

@PaintHQ

Жыл бұрын

Haha 🙏 ..This video has finally come together after quite a few weeks of editing 😆 ..Hope you’re keeping well buddy, keep up the excellent work.. regards Pete

That compact gun looks tiny Probably ideal for spindles and tight areas Stick with my tritech

@davidsmalley8783

Жыл бұрын

Having said that I’ve had two tritech guns where the handle thread has worn out and will no longer grip and leak Have you had this at all Pete ? A Wagner one to

@PaintHQ

Жыл бұрын

Hey David, it’s design as to how two fingers wrap around the swivel / hose, plus a 1/8” whip makes for a very flexible setup 👏👏👏 ..thanks for your input, always a pleasure to hear from you 🙏 ..regards Pete

@PaintHQ

Жыл бұрын

Oh dear, sorry to hear you’ve experienced that.. no I can’t say I’ve had that problem.. if you ever get chance to ‘handle’ any of the Graco PC guns, I think you’ll be impressed, especially the amount of time you spend spraying.. the ProConnect gun cartridge swap out is a great time saving feature to keep you spraying too 👍

🇩🇿🎩

@PaintHQ

Жыл бұрын

🇩🇿❤️👍

hi pete is there a personal number i can contact you as i need some advice please?

@PaintHQ

Жыл бұрын

Hi Gareth.. send me an email to painthq.mail@gmail.com and I’ll send you my mobile number my friend 👍