The Audio Workshop: How to PROPERLY use VOCAL RIDER
Музыка
*UPDATE all you need to do now is to just Send all your music to the music SC bus (Mute that bus because itll echo) and then just simply slap a vocal rider on the targeted vocal track and then use the key insert to side chain the Music SC easy clap, no need for two vocal riders. ***
Here I show you how to Properly use Waves Vocal Rider.. most people just set it up as an insert and only use the plug in to HALF It's potential.
BLOG : www.masondayotproductions.com
Profesional Mixing and Mastering Services : www.masondayotmixing.com
Пікірлер: 310
**UPDATE all you need to do now is to just Send all your music to the music SC bus (Mute that bus because itll echo) and then just simply slap a vocal rider on the targeted vocal track and then use the key insert to side chain the Music SC* easy clap, no need for two vocal riders. ***
@jayceonadler8885
5 жыл бұрын
How do I do this in FL?
@willlove7927
5 жыл бұрын
NOT WORKING FOR ME
@antgod2724
4 жыл бұрын
Could you do a update tutorial?
@tomix1970pl1
4 жыл бұрын
I dont have this key on plugin..?
@urealiknow6060
3 жыл бұрын
and just slapping it on does it..? or you have to write and record it to be fully functional as supposed..?
actual video tutorial starts at 6:48 thank me later
@dannyboycinco
7 жыл бұрын
alvinraydj3 thanks fam
@bv9434
6 жыл бұрын
Thank you
@damienparham3979
6 жыл бұрын
LMAO
@chocolorenzo5158
6 жыл бұрын
Thanks.
@raulduro809
6 жыл бұрын
I know there would be one of you here, you're a good man.
What a beautiful song and voice! And you sir did a wonderful job so far with it's sound! Thank you for this totally useful tutorial! God bless you man!
This video just made Vocal Rider even better! It rides so freakin' well this way!
@MasonDayot
7 жыл бұрын
IT was the original purpose!
Outstanding tutorial....explained very well. Thank you..
Awesome, thanks! Just bought Vocal Rider and this really helped my understand some aspects of the plugin.
Vocal rider = Time saver...PERIOD...great video....i just used your technique on my latest track
For anyone using Ableton, the sidechain option is not on the Vocal rider window, it's on the ableton box at the bottom left of screen where plugins sit. Took me awhile to notice that
@carriefingsolomon
12 күн бұрын
Omg thank you! I wouldn’t have known that
Well done sir! Attention to that detail! I like it!
excellent tutorial. I just got this plug in yesterday and see a lot of potential!
Thanks for a great video, with clear explanations. Much appreciated. And a great track, too!
Wouuuuu! thank you so very much, I already have Vocal Rider, but have never consider to use it this way, thanks for sharing this advance way to use it more eficently!
@MasonDayot
6 жыл бұрын
Yeah you can also just slap it on as the final plug in on your chain and still run the side chain just without that second channel in paralel
@marcomusictv3854
6 жыл бұрын
Mason Dayot great Video Mason! You have a new subscriber!
Thank you for the thorough explanation on using plugin
Thanks. I have not been having great success with this plug-in; now I know why.
i have been using vocal rider for years. this guy just added a lot of extra steps that arent needed. if you mix, you already have bus tracks setup for your drums, gtr, hh, and all that. then you would have a summed buss of all the music. once you have that summed buss, just create a send on that summed buss for the s/c on the vocal rider. place the vocal rider directly on your vocal track last in the chain. each vocal track will be different so each vocal rider setting should be different.
@Pearlpassionstudio
8 жыл бұрын
OK....here's a question. The summed buss is stereo, sending it to VR on that track is to be mono. I don't get it. Does it make a difference instead of sending mono tracks directly to the Lead Vocal vocal rider?
@291god
8 жыл бұрын
it does not make a difference.
@Pearlpassionstudio
8 жыл бұрын
Sure makes sense now that I thought about your process. I sure do have bus stems on all instruments. Just sending them to the VR side chain...Bammmm, done. Thanks for the help.
@stormshadow2k
7 жыл бұрын
Makes total sense, yeah. Thanks.
@AceAttack
6 жыл бұрын
you're a hero :D
Mate i love your tutorial big thanks
Love this. Gonna try it tonight
Great video! Thanks!
Finally, someone explains this well!
@MasonDayot
8 жыл бұрын
Thanks for watching! Hope it works
Excellent video. Thanks for posting!
@MasonDayot
7 жыл бұрын
+Tim Roberts my Pleasure
Really helpful! Thank you!
Awesome program
Thanks man! Great tutorial
Thank you for your knowledge
Awesome tip.... I will gladly put this to use
@MasonDayot
8 жыл бұрын
Let me know how it goes!
Thanks Mason! :)
This helped me so much man thanks.
@MasonDayot
7 жыл бұрын
+Drashawn Clay I'm glad it did!
The way he hits his consonant's jeeeez.
Love this thank you.
@MasonDayot
7 жыл бұрын
+SmoothSailingMusic you're welcome!
Thanks bro! this helped alot..#missing puzzle piece!
Great Video thanks mate!
Hej new to this plugin. Side chain tip very good.
This thing is a monster! I use 2 in series like compression. Try that out. Talk about total control.
@chadb4533
5 жыл бұрын
make a vid!!!
Might be worth mentioning that you're effectively parallel processing the lead vocals here, by sending post-fader to the "Lead VR" buss as well as to "MIXBUSS" from the initial channel. That is, unless I've missed something here haha! Looks like I'll need to take a look at this plugin soon; could be a real time saver! :)
@MasonDayot
8 жыл бұрын
+Ben Davies Music definitely take a look man!
This is great, what cool way to not have to just automate and mix for hours
Thank you very much!!!!!!
@MasonDayot
7 жыл бұрын
YW!
Thanks bro!
THANK YOU
great sounding voice!, nice tutorial
@MasonDayot
5 жыл бұрын
thank you sir. though it IS old..
@mikesparks3398
5 жыл бұрын
@@MasonDayot great vocal sound, that's something i'm trying to work out right now..that's how i fell across this tutorial!
Thanks.
Cheers man.
@MasonDayot
7 жыл бұрын
+laughingboy9000 cheers
love u broooooooooooooooooooooooooooooooooooooooooooo i love u thxxxxxxxx
Awesome
@MasonDayot
7 жыл бұрын
Thanks!
What a great song to demonstrate this Plugin with. Great arrangement, performance and a dynamite mix. Would like to know how this song was mixed and if compression was used on all instrument tracks because everything is really shining through. If a DAW doesn't have a side chain, is there a work around using the buses or maybe using Vocal Rider on a separate bus in the same way as you would apply parallel compression on drums? I can create as many buses as I need in my DAW though. Thanks and any tips would be really appreciated by all. A quick tip of my own regarding compression -- if you like to use stacked compression, say twice on vocals, then set your second instance of it in the reverse mirror image of the first! That way you will catch both the onset transient, as well as the tailout!
Thanx, man! I bought Vocalrider 2 days ago and it is already a great help. Thanx for laying out the sidechain thing, saves me a lot of Braingrease! (is that a word in english?) 🧐great timing for me!😊
4:50 you mixed tf out of that 🔥😭
I tend to leave some drums, percussive and other spikey transients out of the side chain so that vocal rider is oblivious to them. I find you get better and more even results, especially if the transients are very prominent and occasional in the mix. Glorious voice by the way.
@MasonDayot
7 жыл бұрын
+Philfy Phil hmm good idea I should try it
@killsplaque
4 жыл бұрын
Yep, for sure. Don't want snare drum spikes to cause the vocals to come up.
I use the write automation function aswell, then if there is any problems you can still just do some small changes on your main vocal volume automation afterwards. Shouldn't be confused with compression though, 2 different things, compression changes the shape of the waveform due to attack/release/knee settings whereas rider just changes the volume. I tend to compress first then use the rider, then automate volume for sweeping dynamics ie big choruses. Works bloody brilliantly.
@Pearlpassionstudio
8 жыл бұрын
I agree, new at this VR. Question...once you automate the vocal track, do you bypass the Vocal rider and the sends to it? Commit the track to save CPU? Thanks
@metalion667
8 жыл бұрын
once its written the automation i usually just switch it over to read, you could remove the sends to it if you wanted as its not listening to them anymore its just following its own written automation. If youve set it up right the vocal should have a fairly even level throughout the song, sometimes too even so I then go in and either adjust its own automation curves or write a new one using the main track volume, ie re adding dynamics like quiet verses, louder choruses. I dont usually commit to track until im totally happy, from memory the rider is quite a low cpu consumer. The other day I tried it out on a overheads track that kept disappearing in loud parts of the song and it worked great, im sure Ill try it on other sources in the future, its a great tool.
@Pearlpassionstudio
8 жыл бұрын
Explained well, thanks for taking the time getting back with this response. I did do the commit after liking my end result. Now it all makes sense. Cheers
Blew my mind! Thanks! Question: Could you explain again how to use the Output fader of the plugin? Why do you have is so low?
Great info. I cant get totally clear on whether VR ALWAYS should be the last insert or whether it can give a relief on compressors pleaced after VR.
@MasonDayot
8 жыл бұрын
It depends if you want it to help control how hard the compressors have to work, or you can place it after to do fine tuning on the dynamics
Thanks yo
congrats on this tutorial! it really helped me understand certain aspects of the vocal rider use. my question is: In case i wanna use both the Vocal rider technique you demonstrate as well as the Rear bus technique (aka Parallel Compression on the whole mix, watch?v=R0l3XAli6Zg) , how is it possible for them to be combined?
I never understood why I couldn't get the 'Music' feature of this plugin to work. Thanks a bunch! This is golden.
@MasonDayot
7 жыл бұрын
No Problem!
@theshoprecordingstudio7308
7 жыл бұрын
HAHAHAHA! I was gonna make the same statement but feared the horrible backlash
@manesaamusic9927
5 жыл бұрын
SAME HERE@@theshoprecordingstudio7308
Great tutorial, thank you. I have two questions: 1. why do put fader of the VR to -12db? 2. would you use VR write option to record the automation, to, then, adjust it manually if needs be?
I need you to show me where the outputs of these Side chains go, maybe even a template of of what you did in the video!
Thank You so much!! I have had this plugin for ever, and I had pretty much written it off until I watched this. Great Job!
@MasonDayot
7 жыл бұрын
+Aaron Mondo I haven't ridden a vocal since haha
I'm thinking placing a glue compressor set about 50%, just in before the vocal rider would help the Rider get is job done with less late or over-shot errors(?)
Is it somehow possible to do this in Ableton?
Hello! Thank you so much for posting this. I have the plugin and I've was using it incorrectly by just putting it on the vocal track. It does help a lot that way but your way is MUCH better. A quick question for you... How come you setup the track in Mono instead of Stereo? Can't you just make it a stereo track? Many thanks! Todd
@ShalowRecord
Жыл бұрын
If you look closely he does have one VR on the lead vocal directly too
Do you have to bounce the song down in real time so that it plays out loud for the vocal rider to work? (I'm using logic pro) or can you bounce it down offline so that it goes faster, but the vocal rider will still work? also if I wanted to vocal ride multiple tracks at once how could I do that?
What is the name of the artist and the music? Amazing tutorial. Thanks! Best
Cool video. So can it be used as am automatic volume slider for a full stereo mix also without having compression or limiting effects? And what if its used for music with a very low and very high volume changes? I'm talking about using it with a stereo after wave mix and no effecting a vocal track.
Whats the shortest way to use this plug in properly like u have in this video
would this work if I was using a 2 track ?
Did you use VR here both as Insert and on the SC?
Thank you! What about the vocal dial? When do we use that one? Thank you.
what recording chain you are using ?
My plugin doesn't have the key so can't sidechain. Using Ableton 8 / mac
Dont forget to volume match all your sends. "Alt + ctrl + H" after selecting the sending tracks.
Hi thanks for the video. Question. Why do you open another aux channel just for the lead vocal rider as opposed to just using the actual channel where the vocal is to begin with? You could still route all the instrumental to the side chain that way and it would ride the volume on the channel where the vocal is. I don’t understand why you did that. What am I missing here?
@klassenjimmy99
5 ай бұрын
Your not missing anything that was driving me nuts and he finally said you can do that.
I wish waves would not use tiny green indicator lights on their plugins - myself - and many other male users - will have trouble making out the subtle changes - due to red/green color weakness combined with that small size of the indicator. Choose Blue/yellow - shades of grey - or make it larger.
Hi Mason, thanks for the tutorial! I have a question. Why can't you send the music to a bus and simply SC that one bus with the VR instead of having the SC on every track except the vocals? Thanks again.
@MasonDayot
7 жыл бұрын
Well, where are you getting the music from? A stereo bus that has all of the music elements only? With that in mind, you have to send ONLY the music elements that you want. You can even pick and choose which elements you want to send (BGVs for instance)
I can't get this to work properly, it's frustrating as hell. The initial attack of my loud parts are still quite loud and some of the quieter parts just don't seem to recover quickly enough for some lines...
You're the first one to explain that side-chain input takes the ride UP to keep it on top. Most folks think it is ducking due to side-chain music input, like many compressors.
@MasonDayot
7 жыл бұрын
+SeerTrulth mmhm
Are all the vocals on 1 track? For example double and harmonies et?
What song in this? Who is the artist and song name? Great song.
Can i use it on a bounced instrumental like stereo track? Or jus send every instrument stem to the vocal rider aux?
Why the little meter or beside the plug-in on the insert
doesnt work with reaper? won't detect any sidechain 'key' , i believe. help!! thanks.
Do you still have individual busses for your music and drums?
You might want to read the vocal rider manual, then re-do some sections of this video...
Hi a big question. I have a project and there is a vocal level problem. There several tracks and each track has different level problems- louder quieter. I tried this plugin and it works perfectly for each track but then the vocal level is different between the tracks. Is there some limiting option to bring / reduce everything up to 0db with some dynamic variations? This is death metal project so it gotta be all loud and legible. Cheers
@MasonDayot
7 жыл бұрын
That's where you have to do your initial balancing first with compression first. and then use Vocal Rider to rider the music rather than the vocal itself, if that makes sense.
When I set the vocal rider on the aux input, TARGET it is always full with yellow and the output appears on 104.0 and it does not work with that, I set the output on -12 but with the full TARGET, it just makes the voice sounds louder, nothing else... can u help me?
@MasonDayot
7 жыл бұрын
+TxExRxRxAxN hmm not sure, maybe someone else can help you on here!
how would you set it up in Reason 10?
What a great song and great mix, is this someone you recorded? I don't have a side-chain possibility in my DAW, so is there a work around?
@killsplaque
4 жыл бұрын
Get Reaper. It's $60.00 and great. :)
Still haven't found anything that works better than parabolic compression.
@arande3
5 жыл бұрын
Now I do agree that sidechaining the volume level against a soundtrack is a great way to level out the vocal audibility, although I would be pretty gentle with the settings when I do that
why does this trick makes my mix buss right channel so loud its clipping????
also, so you keep vr on the actual track as well as the aux channel? so it's on both?
@killsplaque
4 жыл бұрын
One to control the vocals, like a transparent compressor, then the other one is to ride the vocal on top of the music.
That song is so freaking good.
Hi Mason, Thanks for this extra tip. So just to clarify which you may have a number of times already. You're using the vocal rider already on the channel strip LV as a transparent compressor. THEN you're using an AUX to then ride the compressed signal (also using vocal rider and CLA-2A) against the music? Is there a big difference between this and sidechaining within the LV strip? Thanks
@MasonDayot
7 жыл бұрын
+Marcus Hobbs as an update an easier way to do this is just to send it to the side Jain then put the vocal rider on your vocal track instead.it will still ride the music while receiving from the sidechain
@Yabletttt00
7 жыл бұрын
Ahh right that's how I had been doing it originally but thought you were running it parallel for some reason. Carry on!
Great tutorial. Won't it be easier to just put Vocal Rider directly on the vocal track and still sidechain the music? Until now, I've just been using it as a stand alone plugin to even out the vocal track. Gonna check out the sidechaining now. :-)
@MasonDayot
7 жыл бұрын
+Mikkel Tiedt Musik I actually do that now and can confirm it works
@GammelfarMusik
7 жыл бұрын
Of course it makes sense, if you have a mix of several vocal tracks you need to flow on top of the mix :-)
great mix I study panning eq an compression every day but can get everything clear an sheen even when using excitor. mix still dull do you give mixing lesson
@MasonDayot
7 жыл бұрын
+Maurice Robinson I do overviews of my mixes every other week
can´t access your website
All these steps make sense and you can clearly see that Vocal Rider is "working", but the tutorial doesn't explain whether or not Vocal Rider is WRITING any of the riding it's doing to any of the tracks??? It's supposed to be writing automation right? Well, how do we know if it's writing at all? And does it write to the aux tracks we've created, or the original tracks we tracked the vocals on? And if it writes to the aux track... do we have to unmute it for the final mix of the song and mute the original tracks???? I feel like this part, which should have been the final step, is completely left out.
@MasonDayot
4 жыл бұрын
I’m still surprised this gets views lmao
Hey man, I don't use pro tools.....I'm using reaper, so I don't have the key insert, do you know how I can do what you have done in pro tools, but in reaper.? Thanks.
@MasonDayot
3 жыл бұрын
Not sure. I haven’t really used reaper
Thanks Man. Great Tutorial!
@MasonDayot
7 жыл бұрын
+The SHOP - Rehearsal & Recording Studio thanks!
I can’t get it to automate
wouldn’t it be less cpu intensive if you just send the musical elements busses to the Music SC??
Who is your vocalist. She is fantastic
Do you know how to make the sidechain work in FL studio, i sidechain it to my instrument mix bus but .. it does not detect the music and does not allow me to change the knob on the music sensitivity
@blandwithoutblues
3 жыл бұрын
righttttt
@yogicbeats
3 жыл бұрын
i have same exact problem
@slowpokeproductions
3 жыл бұрын
Are you adjusting your send levels?