That work on the wiring harness and getting it running without the immobiliser is a perfect demonstration of why you guys are the best in the business!

whoever labelled the windscreen is a legend and time saver. I was tempted to ask if it was reusable till I red it was cracked 😅

@DarksideDevelopments

2 жыл бұрын

Make an offer, I'll be sure to write UN on it so it flies through the MOT

@otacon4065

2 жыл бұрын

@@DarksideDevelopments sound mate, can you write not a decat on the decat pipe then the mot man will have to apologise?

@DarksideDevelopments

2 жыл бұрын

Good thinking, yes!

@otacon4065

2 жыл бұрын

@@DarksideDevelopments just cross out the 'not' where it says not for road use ;) how has no one thought of this?

Your episodes could never be to long , Keep them coming mate

"Called" it with the T56 Magnum. Really looking forward to following this project. I love these oddball engine and transmission swaps!

Paul needs to be promoted to hold company shares.....seems like he's a very valuable chap.

Would be cool to see this v12 stripped down to the absolute necessities and a couple turbos and downpipes see how it sounds.

@DarksideDevelopments

2 жыл бұрын

It will happen!

Paul is a pretty good mechanic isn’t he !

Always great to see V12 in a Darkside Developments video. 👍👍

Can't wait to see more of this and the results of the amarok v12 tdi 😍🥰

Cant wait to show this build to all my truck friends here in usa

SOOOO excited to see this project!

Can’t wait to see the big turbo packages you guys do on this platform.

Full respect for delving in so deep👍👍

Hell that V12 is a monster

Outstanding work. Badass project

Can't wait for the next installment, that's going to be an awesome truck 👌

Hello keep up the good work ! this is going to be an interesting build ! 👍

wow it sounds so smooth for a diesel

Ryan this is modern hot rodding at its best with a beast V12 diesel and T56 6 speed in a rear wheel drive Amarok ,this is going to be the most interesting build on KZread for sometime to come looking forward to this superawesome build, i hope the rear diff in the Amarok is stout enough to handle the power or has said its prayers 😂

@DarksideDevelopments

2 жыл бұрын

Ford 9" incoming!

@99unclebob

2 жыл бұрын

@@DarksideDevelopments awesome choice, friends dad builds race engines for drag cars and recommends them more than any other and tons of parts available

friggin love the update, if anyone looking for exhaust flexis like the one on engine, Darkside flexi are best out there

That’s one quick engine removal lads! Keep it up 👍

That's One Big Old Lump🤔 💪💪

Thats a big beast.

The engine management is hell on the V12 ,i had have ecu's trouble with water ,2 years to repair the car ...here in Belgium 😅 now its ok but 🥵🥵🥵🥵🥵hard times passt , Darkside power 💪

How 'easy' was that! (Ok not...) But folks used to make more fuss pulling a pinto out of their Cortinas when I was a kid. I guess once you're past the electrics it's basically the same, only bigger 😳 Looking forward to the next installment.

Christmas day special…. 😜

That's one hell of a lump

Maybe the lifting eyes at the back of the engine makes sense when mated to the gearbox? Perhaps it'd be level if you lifted from there with the weight of the box at the back?

Gonna be awesome, please stick it in the back of an UP gti

Call me a weirdo. But this engine is so amazing.

Damn that is one hell of a lump isn't it. Looks like a nightmare to work on when it's inside even a big bus like the Q7 😫 Double ECU so can't imagine the complexities of attempting to remap that. Still looking forward to the attempt to get that in the Amarok should make for great content. Can we have the bits left in when you'll be effing and just beep them out 😂😂😂😂

@soapmcsoapface1787

2 жыл бұрын

Pretty much any work you need to do on these the engine comes out. There is just zero chance of getting to things. Had a coworker do an oil cooler on one and it just looked like a pain. That was i think like 50-60k swedish kronor which is around 5-6k€

@75L48

11 ай бұрын

complexities of a remap are flashing the same config into both ECUs... wouldn´t run otherwise.

That wiring is the stuff of nightmares 😆

@DarksideDevelopments

2 жыл бұрын

It was fairly straightforward!

@andyhunt457

2 жыл бұрын

@@DarksideDevelopments Like a marathon is fairly straightforward...just one foot in front of the other 😂

That's a huge motor. It barely fits in the q7. Excited to see you squeeze it in to the single cab. Two ECUs? One per bank? Sounds like fun tuning that.

@DarksideDevelopments

2 жыл бұрын

They are just clones, tune one basically

Reyt then

‘Cracked windscreen’ did you call auto glass ?

Could you do a buyers guide to q7 I’ve looked at a few and some had ecu issues but nobody seems to have a clue what’s what and what symptoms are got give you lot 10/10 you live and breath the range

@DarksideDevelopments

2 жыл бұрын

We don't get involved with those sort of issues so not the best to do such a video. Buy later and don't go for a silly low miler. Get something that has been maintained!

@bill3021

2 жыл бұрын

@@DarksideDevelopments no worries I’m looking at one at the moment said it just died on a 64 plate got people saying fuel others saying ecu think it’s best to put a vagcom on although he’s saying there’s no codes

@DarksideDevelopments

2 жыл бұрын

No codes sounds odd.

Houuuu i would like make complete exhaust but the downpipe section was very difficult 😬 , with my hands i Can touch the turbo bride but ,see the way on your engine ...😳 Hmmm dpf out and replacement by tube is hard 🤔 ,i don't care my V12 will sing ! 😁

Reyt then another top video

......and going in the R8 ? Damn, going in the single cab ?

@DarksideDevelopments

2 жыл бұрын

Unfortunately it would not fit in the R8 :(

@catlee8064

2 жыл бұрын

@@DarksideDevelopments Yeah i should of thought the height/width of it would be too much, my bad !

Instead of dimpling the exhaust tube to fit could you use oval tube to get volume area. Cheers

@DarksideDevelopments

2 жыл бұрын

A tune fitted OK!

Is the amarok getting the carbon ceramics as well? 😁

@DarksideDevelopments

2 жыл бұрын

Yes

V12 q7 TDI manual are you kidding me?! 🥲

@DarksideDevelopments

2 жыл бұрын

It's going in an Amarok

@DarksideDevelopments

2 жыл бұрын

kzread.info/dash/bejne/q6SasrqHg5OuYNI.html this one

Oh those down pipes.............

Please keep the Q7 brakes in the Amarok

@DarksideDevelopments

2 жыл бұрын

It's happening!

Hooo i look the vidéo in bed , i'm curious because i have One Q7 V12 and i Know in future ,i will unfitt the engine out the Frame 😂

Looks crazy complicated, you have a talented team! Realistically, how possible is it to put that in a mk1 golf? 🤔🤣

@DarksideDevelopments

2 жыл бұрын

The golf would be 'on' the engine

@cwuzii

2 жыл бұрын

@@DarksideDevelopments squeeze it in the boot and make it rwd 🤣

Not enough likes compared to the veiws ppl?? We know what we're getting when you come to the DarkSide and I love it. Nice1 lads 100% the best information I've found.. what can you do to my infiniti ex30d lads?

@DarksideDevelopments

2 жыл бұрын

Cheers, can't help with the Infinity though!

Any plans to upgrade turbos on the 4.2 tdi in the d4 a8 ?

@DarksideDevelopments

2 жыл бұрын

We have a Q7 booked in for big turbos and some other mods ;l

Anychance to take away those ECUs and get a standalone to control all the cylinders?

@DarksideDevelopments

2 жыл бұрын

Nothing can do all 12 together, we will learn more tuning with OEM

would it be possible to engine swap 1 ton ford or chevy/gmc or Ram trucks engines and swap it with this audi engine

@DarksideDevelopments

11 ай бұрын

It'll probably take a lot of work but i'm sure you could do it. Not something we have tried

Hi.Can this engine be fitted to a sedan? For example: e class, 5 series, A5, etc.

@DarksideDevelopments

2 жыл бұрын

Anything is possible but it's a huge engine

Whats your plans with this beast is the v10 touareg gonna get a brother for off roading

@DarksideDevelopments

2 жыл бұрын

Single cab ;)

@GT320VLOGS

2 жыл бұрын

@@DarksideDevelopments happy days cant wait for the videos on it an i just bought the v6 touareg aswell

@DarksideDevelopments

2 жыл бұрын

Wise choice!

@GT320VLOGS

2 жыл бұрын

You guys still have that first back box delete you did for the v10 or has it gone and will it fit the v6??

@DarksideDevelopments

2 жыл бұрын

It sold ages ago, V6 is a different setup but we can make one!

i need a downpipe for a A4b9 2.0tdi but you havent one in your shop=(

@DarksideDevelopments

2 жыл бұрын

Email the VIN :)

@Flo-wu8px

2 жыл бұрын

@@DarksideDevelopments thanks. I do it!

What year Q7 is that guy and how much for both front strut assemblys

@DarksideDevelopments

2 жыл бұрын

It's a 2010, please email with what do you need exactly, we are likely using the Q7 front hubs.

@davidcochrane3671

2 жыл бұрын

Both front air struts, left and right. What mileage was on the audi?

2 ECUs, one a side?

@DarksideDevelopments

2 жыл бұрын

Yes

@christopherbell7561

2 жыл бұрын

Dam!! Keep going lads!

ECU1, and ECU2.. The fuck o.O

What a huge fat engine 😂 vw was really snorting cocain when they designed all this!

How much does this engine weigh?(sorry for the spelling....)

@DarksideDevelopments

2 жыл бұрын

340kg or so

I bid 49p for the cake 🎂 😆

@DarksideDevelopments

2 жыл бұрын

Sold

How much are you selling the rotten cake for?

@DarksideDevelopments

2 жыл бұрын

Highest bid so far 49p

@bouncycastles1214

2 жыл бұрын

@@DarksideDevelopments 😂

I like your vids but sometimes i cant see shit

@DarksideDevelopments

2 жыл бұрын

It's a bit dark at times on camera, working on it!

Long videos are better

So we're not getting the V12 Audi R8 TDI then why doesn't go to plan we need that UK's first Audi V12 R8 tho so scratch your head and your bullocks can come up with something 😁🤘🤟👌🤌☝️👏😁

@DarksideDevelopments

2 жыл бұрын

This engine is way too tall for an R8

@GETPHUCKED57

2 жыл бұрын

Will at least are we getting a PD TDI tho !!! 😁 R8 Lols for the jokes !!