What do you think of the beam saw? what a beast! Stealth Mount GIveaway: (NZ Only) Comment your Instagram name, what tool brand you want mounts for (Festool, Hikoki, Makita, Milwaukee or Dewalt) And answer the question "What should you use with a chisel? a hammer or a mallet?" Good luck!

@williamlauder9213

3 жыл бұрын

Incredible!!! I can only imagine getting my hands on one, one day... maybe someone will hire one out?! Haha Hirepool... Milwaukee mounts would be a dream 😉 @Northmen_construction

@default9740

3 жыл бұрын

@default_nz , the DeWalt mounts would be great for an upcoming van fitout. I promise I’ll only whack my chisel with a mallet.

@nevillewilson1406

3 жыл бұрын

Thanks ,my tools are Makita and i would use a mallet . #buildingdreams

@double_074

3 жыл бұрын

Wheres my trusty brand OZITO?

@laneashby-king8968

3 жыл бұрын

@lanes_transformation - always a Mallet!! DeWalt please bro, will look great in the workshop! :)

Meanwhile, the drummer guy in his container is shooting his video saying "if you hear something that sounds like a jumbo jet, it's just this carpenter dude with his mammoth saw" 😂

@sukhudeskjet3706

3 жыл бұрын

Ahahahaahah

@ultimateadventuresblog6564

3 жыл бұрын

hahahhahahahha

@patroberts4708

3 жыл бұрын

Lame

@vzgsxr

3 жыл бұрын

@Schwalbe262 Umm, I'd say don't get on his bad side. 🤣

@drewt6235

3 жыл бұрын

😂

Whenever a New Zealand politician gets "gifted" a donation, they should mark their next speech as an "advertisement"

@robertjonsson5518

3 жыл бұрын

Shouldent all politicians be marked then ?:)

@11kungfu11

3 жыл бұрын

@@robertjonsson5518 They should have to wear NASCAR style suits.

@jasonswoger410

3 жыл бұрын

We could use that in America as well

@jeffstanley4593

3 жыл бұрын

I am not even from NZ and I approve of this message. The same thing should apply everywhere including the US.

@MrGtownjake

3 жыл бұрын

Here in America, the joke is we should require the politicians wear sponsor logos on their suites just like the NASCAR drivers do.

Meanwhile in Australia, Paul Hogan is walking up to someone on a job site with that Mafell beam saw and saying, "That's not a saw..."

@Straale501

3 жыл бұрын

Touché! haahahahaha..

@rickrudd

3 жыл бұрын

Needs garlic!

@Ben-bp5dw

3 жыл бұрын

This comment is so underrated 🤣

@tzenophile

3 жыл бұрын

Mafell? I heard Mo-Fo saw..

@mrpoopypants9586

3 жыл бұрын

Had to be said :-)

Im from Australia, but I'm an electrician and the best and only chisel is a flat head screw driver being bashed with a set of pliers 🤣

@drewtaranto9509

3 жыл бұрын

my people

@scotta.2967

3 жыл бұрын

A pair of Klein side cutters and a big azzz screwdriver will damn near fix anything

@nelit2270

3 жыл бұрын

Without seeing you said you were an electrician, I was going to say "typical sparky talk" 🤣

@joearchuleta6400

3 жыл бұрын

Lmao yep. The big flat head is our chisel. We call it our “beater”

@paulguerrero972

3 жыл бұрын

Hey sparky, I like your style!!!!🤪🤪🤪 But we learned to use the screwdriver to cut holes in trunk line for heating and cooling!!!

Gaston is like the Snap-on truck for carpenters.

And I was just thinking the other day "I hope Gaston is ok, haven't seen him in a while"

Gaston is such a character, what a personality. He's really all you want in a salesman, just a genuine dude. Comedic timing is impeccable and subtle, too.

@gregkelly2233

2 жыл бұрын

Would definantely welcome him to my site anytime haha 🤝

Gaston videos remind me of a the hardware-store story that ends “I didn’t need any, but he was so enthusiastic and knowledgeable, I wish I did.” Thanks for the video!

Gaston's visits are always a highlight, great video

Loved Gaston's, "If you wanna have all the shavings in your face, you can do that." Lmao!

Gaston's tagline; 'When it comes to hand tools, if I don't have it, you don't need it.'

I've got a 16" Makita that I've had for over 20 years. I only use it 3 or 4 times a year but it is handy when needed.

Your friend Gaston gives the impression that he has his tools business purely as a way of maintaining his hobby for tools and new tool tech. Which is excellent.

The Name Mafell means „Maschinenfabrik Fellbach“ in south Germany. All tools of them are great!

@golayy

3 жыл бұрын

I work everyday withe Mafell tolls, they are the beste for timber framing

@anatomie6340

3 жыл бұрын

I'm in a Realatioship with Erika😍

@MrMEINNAMEISTMENSCH

3 жыл бұрын

except for the drills, we had two new ones on a construction site and they both broke within three weeks

@tonic4497

2 жыл бұрын

@@MrMEINNAMEISTMENSCH the drills are made by metabo

I'm a Journeymen Cabinet Maker out here in Canada. I will never need that saw ever, but I really want it lol

@roberthibberd5362

3 жыл бұрын

See if you can luck into an old 40's or 50's Porter Cable K10 or K12 beast. I picked one up, sans lower blade gaurd, for $22.50 at auction 😁

@wurclav1

3 жыл бұрын

The big Makita beam saw is great. Get an old one for 300 bucks. Make sure nothing else is plugged in to the 15 amp circuit.

@jam1324

3 жыл бұрын

@@wurclav1 Second on that Makita, I've used one lots for beams they are great and super cheap!

@wurclav1

3 жыл бұрын

There's a Makita on kijiji right now. 200 bucks. Needs work but worth it.

@andrewpritchard5328

3 жыл бұрын

don't we all

Mafell is etter than festool on making saws. In german carpentry this is the top brand. Greetings from Germany.

@samoanSAIYAN

3 жыл бұрын

To get mafell in Australia is a pain and a half. Thou I would love the ability to purchase mafell.

@samoanSAIYAN

3 жыл бұрын

@@daispatrick no idea what you saying but thank you bro

@evgeniydeus8137

3 жыл бұрын

Mafell tools are great, but the price... You need a good stable carpentry business to be able to justify a purchase like that.

@berserker6702

3 жыл бұрын

In Germany the price is currently 4598.50€ and with guide rail 5057, 60€

@nilsandresen9912

3 жыл бұрын

@@evgeniydeus8137 I know a lot of carpentry business that only get Mafell saws. They are the best saws you‘ll ever get your hands on. For the pricepoint they sell here, it‘s honestly rather easy to justify that purchase as a carpenter, if you handle big diameter logs regularily

Shout out to that drummer that’s thoughtful as. Hires a storage room just to go practise drums. What a legend mate

@ScottBrownCarpentry

3 жыл бұрын

I agree

I haven't seen Gaston videos before and I love it. He reminds me of an uncle I have back home. Great tools too! thanks

I friggen love when Gaston comes to town

When Gaston walked behind the saw to hold the timber, I was like please don't kickback please don't kickback. Kiddies out there, never stand behind an operational circular saw, especially holding the timber.

@sovajaja1718

3 жыл бұрын

I was scrolling through the comments to see if anyone noticed that 👍🏽

@Fractal666

Жыл бұрын

yeah terrifying, even standing in front with a saw that size with that much torque... like bruh it'd cut you in half.

Love it when Gaston is on. The casting director for this channel has done a top job since episode #1. Kameron, Gaston, etc etc.

@christian.h8440

3 жыл бұрын

The lot of them! Scott, Paerau, Kameron, Gaston, Richard , All legends in my books!

@luckyal_syd

3 жыл бұрын

Don't forget the occasionals too - Sayeed, Gillies, the two plumbers whose names I can't remember...

videos with Gaston are always my favourite, it's like christmas every time, I don't get any presents, but watching other people play and show off new toys is always a treat. WIsh there were more videos with Gaston... I think I've watched them all.

@ohasis8331

2 жыл бұрын

His behind the product antics are rather amusing.

I’ve had the Rali 105 in nickel since 2001 and love it, easy depth adjustment and always square to the sole. I gifted one to a friend who is a trimwork contractor several years ago and he loves it also.

My wife would always ask what’s with you boys and toys, honestly could spend hours trawling through Gaston’s truck

Veto pro packs are expensive, but they make life a lot easier. And Wera tools, what can I say... quality.

Gaston, I used to serve you at Blacks in Nelson so glad you get to stock Wera your a true salesman and your passion for quality tools always shines through.

I just love how Passionate this guy is about tools, don't come across tool shops like that very often that just tells you about the tools for what it really is, no bullshit, so you will always go back to him

in my shop i use a mallet, my "in the field chisels" have never been hit with a mallet in their life lol

What was the light that you can plug different batteries into?

@dustin9100

3 жыл бұрын

I second this. Couldn't find it on their website

@tucker2980

3 жыл бұрын

Yes please give us an answer

@scottspropertyservices6877

3 жыл бұрын

That other blue light is a Grizzly Light so I just looked up the site & there’s an “edge 20w hybrid worklight” with “coming soon” as the picture. Looked at the description & it says it’s compatible with leading brands power tool battery systems. So that’ll be the one👍🏼

Love the channel Scott! Always looking forward to the next exciting episode.

Love that you're not shy to share that the tool you're receiving is an advert, lots of creators try to hide it, you have nothing to hide!!!

intead of santa claus coming to town Gaston is coming to town

The WERA impaktor bits are just the best I have used up to now...

I love your videos Scott I am an apprentice from the uk and love watching your videos to learn what other joiners do in other places keep it up man the quality of the videos have improved a lot since I first started watching you 😁😁

@garethheathcote4988

3 жыл бұрын

Whereabouts in the uk are you m8? I hope that your apprenticeship is with a decent firm.

Rewatched all the Gaston videos yesterday, then wake up to this. Happy Sunday 😊

I like that multiplying screwdriver, I think I'll buy one.

"That's not a saw, that's a spoon!" "I see you've played saw-ies spoon-ies before!"

Hello Gaston! So good to see your smiling face again. Scott, You should do a little New Year video of your band of characters just sharing a meal and some laughs. We could all use some cheer after 2020.

Wera tools are the absolute bomb! I am from Holland and it's still quite unknown here but you can buy it at the right places. Once you bought one set, there's no going back to other brands! By far the best brand I've used for hand tools. Cool to see the brand in your vid.

Mafell is the king of woodworking tools 👍😍

Tim Taylor and Al Borland are at it again! TOOL TIME! (If anyone remembers Home Improvement)

Been using Stealth mounts for a couple years in UK ,i have boards set up in workshop plus when no site just hang them up for each brand of tool i have .Found all the trades use them saves time .

When Gaston grabbed the timber behind the saw, while you were cutting. I thought about what sort of kickback a saw like that has. I had to close my eyes.

Like the vids, sorry I can't take part in the give away since I live in Iceland. Always good to see Gaston and the newest and latest in tools 👌💪

@alexjames1146

3 жыл бұрын

Mallet or hammer?

@88Haffi

3 жыл бұрын

@@alexjames1146 hammer sadly, those few times I use a wood chisel it's just the beating object closest to me.

I love the smell of maffell in the morning.

I have my batteries in the van on stealth mounts, easy to grab without digging through boxes to use or change. Also have that mini hultafors pry bar, really useful and surprisingly strong

Incredible saw!! Thanks for showing us!

WERA is quality tools!!!!! 10/10 😍😍😍

Please set up a piranha tools in Scotland.

@garethheathcote4988

3 жыл бұрын

You can buy a good ninety percent of the tools that he sells from the timber framing tools uk website m8.

@flukywotsit8555

3 жыл бұрын

@@garethheathcote4988 thank will check them out

Featuring piranha tools in your videos is a Christmas present for us!❤️

I did the two days showcase with Mafell in Germany a few years back going through every product testing and trying them out. Incredible machines! Now work for the UK distributor! You can’t beat Mafell.

Hi. What brand was the site light? Thanks in advance!

@samsingh2042

3 жыл бұрын

That was a hikoki or Hitachi

I use a “mallet” with a Chisel. On the battery mounts I like the Milwaukee.

@toonzbrah4316

3 жыл бұрын

Is mullet the correct answer jw

@mrpoopypants9586

3 жыл бұрын

@@toonzbrah4316 You could cut your mullet with a chisel ...

I have Makita battery clips next to the shelf where I have my chargers. I put uncharged batteries in or behind the chargers, and promote them to the clips as they charge. Love it, makes life easier!

The Wera collection is by far my favourite drivers and bits I've ever seen, I keep the compact one that has the bits hidden inside it on me at all times, I'm slowly building up my set of Wera tools because they are expensive but they feel like they'll last a lifetime.

That saw would be perfect for cutting dovetails.

@adammacer

3 жыл бұрын

off doves?..

@ryanslut5607

3 жыл бұрын

Could be a dove processor or a good tennon saw perhaps?

@anxiousappliance

3 жыл бұрын

emu tails

The kick back on the mafell would rip your arm off!

@davidhull1610

3 жыл бұрын

And possibly your head too! We had a contractor killed in the U.K a few years ago, when his 7 1/4" circular saw kicked back and somehow it jumped up and sliced his jugular open......that Mafell would cut you in half!

@tmmtmm

3 жыл бұрын

Yep seems like a bad idea. Just like when putting big bits in your router at some point it becomes dangerous and you're better off using a router table.

@samoanSAIYAN

3 жыл бұрын

I was worried when Gaston stood in the front then at the back while cutting.

14:54 thx for sacrificing your “container” with all the sawdust to show us that beam saw👍🏻👍🏻

@ryanslut5607

3 жыл бұрын

I'm so surprised Scott didn't plug in the mighty festol up to it

Gaston is awesome! Always a good video when he visits

10k ? wtf. I come from Germany and have exactly the same saw, but here it costs “only” 4,000 euros. The Mafell products are awesome for hard and big work.

@karremania

3 жыл бұрын

On his previous tools it was the same massive difference, export, taxes, gst, etc it all goes up alot when u go to the other side of the planet :D

@mrhortimer1

3 жыл бұрын

Yeah, that was my thought as well. 10k seems a little excessive compared to the 4000€ over here. But I think it is a matter of import taxes and customs. That's probably why the price increases so steeply.

@donderjager4770

3 жыл бұрын

May I ask you where you use it for? Timberframing? I'm Dutch but i've never seen one being used here.

@mrhortimer1

3 жыл бұрын

@@donderjager4770 it can be used for timberframing as well as anywhere where you have to cut beams over 100mm (I think that is the minimum cut depth of that particular saw). For example in large production buildings where the roof construction is made from wood. Or pole frame buildings. Basically any beam that you'd have to cross cut multiple times to go through.

@donderjager4770

3 жыл бұрын

@@mrhortimer1 Yeah I know, I was curious to his specific use. Since in The Netherlands we rarely use those kind of sized beams.

And all the US viewers are saying what about us. Well now you know how giveaways feels to other country users.

Love my veto bag . Glad their growing! Quality!

MAKITA! I don't do Instagram, but as for chiseles... I use whatever's handy, hammer, mallet, 2x4, or some elbow grease.

Thats a saw you dont want kickback from!!!!

@everythingcool101

3 жыл бұрын

Yeah ikr. Id be shitting myself if i were to use that lol

@adammacer

3 жыл бұрын

I've used one a lot and that was always my worry but, for whatever reason, I've never experience it nor heard of anyone who has.. they don't spin that fast perhaps, or the lumber sizes you're cutting resist pinching just due to their size?..

@riccardovazzoler8517

3 жыл бұрын

@@adammacer don’t know other brands’s beam saws, but this one has a riving Knife, maybe that helps avoiding pinching? Just my opinion, I don’t know for sure. I’ d be more worried about using that kind of beam saws (don’t know if it’s the right name) that have bar and chain like chainsaws.

@adammacer

3 жыл бұрын

@@riccardovazzoler8517 Yes, of course - that would make a big difference for sure. I don't recall ours being fitted with them but probably were.

@SovereignStorm

3 жыл бұрын

Those saws never really kick back. The slow RPM, ratio of power to weight and especially the diameter of the blade make it far less powerful than normal size saws per kilo. They just stop and that's it.

I actually did't know the exchange rate nzd to euro untill this video pretty interesting 10000nz=5000euro

Nice video again i like to see al te new hand tools from Gaston I hope you will show more of this video's in the future 😁👍what a beast that mafell saw 😅

I was 19 when I ran a beam saw while building prefabricated log homes. Biggest hand saw i ever opperated. Largest saw i ever used and did maintenance on was a band saw on a track powered by hydraulics that had a 20' blade talk about power! I ran some freaking amazing equipment in that job.

Gaston (or anyone really) shouldn't put his hands behind a circ saw. It can always kick back and guess what it's gonna hit.

Don't Mafell make a 610mm hand held saw that takes two men to operate...one pushing and one pulling?

@boogiedahomey

3 жыл бұрын

I think it's the chainsaw beam cutter. It has two 240v motors on it

@adammacer

3 жыл бұрын

Yes, a buddy has one.. used it once on a job I was helping on.. an insane, and insanely heavy, bit of kit..

I know which category of Advent calendar users I fall into: have been using my full kit from Gaston for a couple of weeks now. And good to see Gaston took the plunge to stock Veto. I got a TechPac earlier in the year, it’s one of the best tools I own.

Loved some of those new tools from Gaston!

Great video. I like these tool ones. I like tools just like you guys.

4:54 I love how serious he sounded haha

Always great to see Gaston

10/10 the veto bags for hvac, I use the tech lc and the tp4 for rooftops carries everything needed for 90% jobs

New to work working here. Definitely a mallet! Feels like my chisel won't break when I hammer down hard haha.

Hi I was using this saw in the 1990 in Germany 🇩🇪 they had them connected to the 3 phase electric supply a very powerful machine and light weight I was cutting bevelled up stands for the permitter of a grass pitched roof it did the job easily I was surprised how easy it did the job

Gaston!? Oh man this is going to be a great video! Tools are just the best!

Great hard working mafell saw, we use them for ripping oak beams.

Loove the Gaston vids!

I have used a similar sized saw. But it was on a track which made it very easy. Soft start and very smooth. The 9inch Hitachi was more scary as it was just rough.

These are the best videos with Gaston

Great saw for working on glulam beams. We call it "the ride on" as its massive.

I’ve had the Vito tech lc, It’s the best thing I ever bought. Heating technician from the Uk. The other bags also look amazing

Gaston always has a way of showing up on the best of days.

That light was amazeballs!

I've used one of these bad boys. Surprisingly easy to use.

Love new toys. I have a few of the Rali Planes. They are pretty good

Always nice to see gaston 👍

I normally use a hammer day to day for rough carpentry. But the correct tool to use is a mallet and I would love to have the Dewalt battery clips please. Keep up the good work Scott

I’m from Canada and I like what you do on your KZread channel. Thats a big one and that’s what she said

Keep up the good work scott

I use a mallet for the chisel. And I would love the Milwaukee battery mounts!

🤣 the drums... Nice video!

That saw is crazy! I’ve got a festool hk85 and even that feels too big when you’re using it lol.

Iv had my veto pro tp4 pouch and tech back pack for years now ! They are the best made bag in the business!

Hey awesome vids as always!! I used that saw a few times in Switzerland, powerful!! Do your self favor and get the RALI planer they are great!!

Never stand behind that beast of a saw again Gaston.great video 👍

Awesome collection of tools!