No video

Testing the New NIBBI Carb on my WPB 190 BEAST

First test ride with the New Nibbi carb ive installed, seeing if there are any issues or fettling needed.
Thanks for watching
MOTO MACHINEZ UK
Follow on INSTAGRAM
WPB BEAST 190 Welsh Pit Bike

Пікірлер: 80

  • @tigerstripemark6973
    @tigerstripemark69732 жыл бұрын

    You will have to do another top speed run buddy ,with the nibbi,as it sounded as thought it was holding back a little with the original carb on ,i shall watch with interest👍👍

  • @ThtGSXRguy
    @ThtGSXRguy2 жыл бұрын

    I wasn’t quite as lucky as to have no tuning, but after a few days of getting the jetting right and retuning, the Nibbi carb really unleashed the beast on the 155z 👌

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    I think it's probably slightly rich and will soon find out when I inspect new spark plug. Seems like it's going very strong and couldn't find any bad patches. More testing needed but so far so good I'm pleased

  • @rabc.nesbitt7715
    @rabc.nesbitt77152 жыл бұрын

    Glad your finally having some luck with the beast 💪, my wpb race 125 arrived / its MOT'd and all forms away to dvla. I can confirm wpb give a certificate of newness and the come standard with magnetic sump plugs and E marked tyres 😀

  • @Giblet16

    @Giblet16

    2 жыл бұрын

    Mines currently at DVLA for my wpb 125 can confirm e marked tyres and magnetic plug is standard

  • @lonewolfplays8790

    @lonewolfplays8790

    2 жыл бұрын

    can you make these legal to ride on roads?

  • @rabc.nesbitt7715

    @rabc.nesbitt7715

    2 жыл бұрын

    @@lonewolfplays8790 if your planning on doing it. Welsh pitbikes are good because... They come with a certificate of newness (needed for v55/5 dvla form) They are nova registered already(need again for v55/5) E marked tyres as standard (needed for mot) Get it insured (Adrian flux /bikesure) with vin number Get it mot'd (you need a horn that's all) hornit horn £20 will be daytime only mot Then fillin v55/5 form send to dvla with all papers ect £22 for tax £55 first registration It takes 5 weeks. Hope that helps

  • @lonewolfplays8790

    @lonewolfplays8790

    2 жыл бұрын

    @@rabc.nesbitt7715 niceeee. thanks fore the reply . i was buying one of these just purely for off road but its making me want to get it even more now knowing i can get it on road evenatully . dont u need indicators and a license plate aswell

  • @rabc.nesbitt7715

    @rabc.nesbitt7715

    2 жыл бұрын

    @@lonewolfplays8790 no front lights no rear light or brake light no indicators. You need an mot before you can register it , so no number plate required. They use the vin number to mot it.

  • @eirikswensrud4264
    @eirikswensrud42642 жыл бұрын

    There are also two types of the Nibbi carb you are using, The red and black ones with chromium plated slide and its polished in the plenum area which is the "racing" version. Then there is the standard version that is raw aluminum color and not polished and generally requires jetting, I'm seeing them being included with the ZS 190cc kits.

  • @ashleyhawkins4113
    @ashleyhawkins41132 жыл бұрын

    Bluemin farmers growing crop on your play fields! Then they have the cheek not to cut the grass too! Nice vid bud good to see the beast out

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    I know what's that all about bikes before crops eh lol. Cheers mate and yes was nice to get on the bike too Thanks

  • @eirikswensrud4264
    @eirikswensrud42642 жыл бұрын

    I've been running the Nibbi 28mm on all my ZS190 powered bikes for 2 years and they are fantastic!!

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    I'm very pleased with mine so far. Got some more testing to do but it feels very strong. So many mixed opinions on nibbi.

  • @landon9295

    @landon9295

    Жыл бұрын

    i have a zs 190 bored to 212 and cant get the tuning right at all do you know what jets you had?

  • @annabanna666

    @annabanna666

    Жыл бұрын

    what jets size for the zs 190, thanks

  • @peternufc1981

    @peternufc1981

    Жыл бұрын

    Goes that littlw beast thinking of buying a brand new one .. just bought my son a 140 stomp for Christmas and it's cool. I want to eat out with him on them

  • @S416RE
    @S416RE2 жыл бұрын

    She's sounding pretty good man 👍‍

  • @oneanddonetzone3673
    @oneanddonetzone36736 ай бұрын

    If I can make a suggestion put in an NGK DPR8EIX-9 Iridium IX Spark Plug and NIBBI Performance Ignition Coil Fit for 4T Carburetor Motorcycle total you have about $35 on it you’ll never have to change your spark plug again and I think you’ll see some improvement further!

  • @jamierichards2235
    @jamierichards22353 ай бұрын

    Hi guys can any one help i have a brand new yx 160 running on a vm26 125 main jet doesnt seem to have the power i thought it would have only a tiny bit more than my old 140, does any one els have the 160 and could suggest a good carb setup? Mine bogs at low rpms and doesnt seem much more powerful than my old 140 at high rpms and it doesnt run with the choke on

  • @catalickconverta6823
    @catalickconverta68232 жыл бұрын

    Try it on a cold crisp morning it will run nicer i wish i still had my old pit bike had a demon x 160 with the large wheels new bars leavers ect looked sick an rode even sicker

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Great fun arnt they. Yes most engines run better with crisp air especially my road bike.

  • @catalickconverta6823

    @catalickconverta6823

    2 жыл бұрын

    @@motomachinezuk8786 they are indeed mate perfect for the summer evenings when you want to ride but just wonna have a laugh an not have to clean and lug a full size bike about an that haha

  • @tomtom7776666
    @tomtom77766662 жыл бұрын

    Great vid mate and you can hear the carb as made some improvement with the wheel spinning up like that in 3rd so good choice mate will be looking into one of them carbs for mine I wonder if it’s made any difference on mph will have to do another top speed run 👍

  • @meeeeeej8
    @meeeeeej85 ай бұрын

    I keep watching videos of this bike and want 1 so bad

  • @RyanJames-ml7oc
    @RyanJames-ml7oc Жыл бұрын

    Is the 190 beast worth buying?

  • @back2_basice
    @back2_basice Жыл бұрын

    i need one of these

  • @tymiles9089
    @tymiles90892 жыл бұрын

    More vids on this please

  • @fredbaker3822
    @fredbaker38222 жыл бұрын

    Great video! how long have you have the bike for now? Hows it going?

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Nearly 3 years and going fine Cheers glad you enjoyed

  • @ukm6yik69
    @ukm6yik692 жыл бұрын

    Sounds like it’s over revving a little when giving it some

  • @enduroSlovakia14
    @enduroSlovakia144 ай бұрын

    Does it go faster?

  • @adamhough5367
    @adamhough53672 жыл бұрын

    what is the fuel like on these bikes? Does it last long and how much litres does it take?

  • @ReclaimerB312
    @ReclaimerB3122 жыл бұрын

    Great vid mate keep it goin. Getting a WPB race 140 on Thursday, definitely going to change the carb and air filter what would you recommend.

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Thank you and good luck with the new purchase. I'm not sure about the 140s but I'm guessing a 26mm. Uni air filter from ebay are quite good I think

  • @ReclaimerB312

    @ReclaimerB312

    2 жыл бұрын

    @@motomachinezuk8786 cheers pal 👍🏻 top man

  • @camparle6864
    @camparle68642 жыл бұрын

    Hi mate would you know of anywhere I can get 17 & 14 inch supermoto tyres from for my 125 road legal thumpstar thanks love the vids 🙂

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Hi I would try ebay that's where I get my tyres from or local dealer is best bet. I've never purchased those size and type of tyre so I'm not too sure to be honest. Thanks for watching all the support helps. Appreciate it cheers

  • @wm05eb
    @wm05eb2 жыл бұрын

    Hi mate, looking at getting a new pit bike, what’s the best one out? Are the 190’s reliable yet? Can you still get the Detroit?? Just looking at something to play on with fairly decent suspension, I ride a yz250 big bike. I’m fairly tall too. What’s your recommendations cheers pal

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Hello mine has been OK since I added the gearbox mod. I'm not sure if they sorted problem out to be honest. Biggest pit bike frame you can get. They are just cheap fun and need a little tlc to keep reliable then they are fine for messing about on. It's no yamaha. I like mine as good area for it and less hassle than getting my 250 out a d having to clean etc and body protection etc.. it has a bit of punch this 190 for price.

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Suspension stock isn't great but lots of options available out there for replacement parts. The deteoit has gone from the demon range but I think available in a thumpstar. Same as demon x just different colour

  • @solounstreamer4238
    @solounstreamer4238 Жыл бұрын

    What number of jets u use?? Pls

  • @motomachinezuk8786

    @motomachinezuk8786

    Жыл бұрын

    I just looked on the box and it doesn't say. Whatever come stock with the 28mm nibbi Sorry I can't answer I tried to look

  • @999roxtambler
    @999roxtambler2 жыл бұрын

    Will the person that allows you to ride on his field allow any more people? I'm local and am looking for somewhere to take a 190 beast.

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Where is local ? I don't know personally I wouldn't ask them as others have been and told to leave because they abuse and mistreated the place.

  • @999roxtambler

    @999roxtambler

    2 жыл бұрын

    @@motomachinezuk8786 chippy area. Fair enough, I haven't even got the bike yet. I used to have a stomp 140, loved it but no where to ride the bloody things haha!

  • @jimjones4206
    @jimjones42062 жыл бұрын

    Got an apollo rxf 190 same nibi carb cant get to work as well as my standard carb what pin settin do u have it on mate? I noticed the pin in mine has like 4 or 5 differnt settings tried on last n second to last n no joy just boggin

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Hi I'm not sure the needle height I haven't changed at all from how it came. I plan to drop it a notch when I open it up but that won't be for a few days yet. When I'm happy with set up I shall share setting s

  • @jimjones4206

    @jimjones4206

    2 жыл бұрын

    @@motomachinezuk8786 cheers mate all the best

  • @manyeastgarland

    @manyeastgarland

    11 ай бұрын

    If you still have it it goes on the 3rd notch and I run 48 /112 jets

  • @terryshove5926
    @terryshove59262 жыл бұрын

    Love the channel mate I think you need to do give aways to boost your subs you always do good videos, maybe you could do some wheeling videos in the future

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Thank you and yes I know what you mean I have tho8ght about a giveaway but that's as much as I did. Maybe think more about 1 this time if you think it will help

  • @terryshove5926

    @terryshove5926

    2 жыл бұрын

    Yer deffo I noticed wheelie videos get a lot of attention and like verses videos say kx vs cr etc

  • @gregkirby
    @gregkirby Жыл бұрын

    What's it jetted?

  • @motomachinezuk8786

    @motomachinezuk8786

    Жыл бұрын

    Stock

  • @alexstowell16
    @alexstowell162 жыл бұрын

    Hi mate I'm really interested in getting 1 of these and I noticed on 1 of your previous vids you had trouble with the gearbox and said the bike was nothing but junk and needs a match in the tank lol, I notice you've still got it stuck with and rectified the problem, is this a common fault with these and would you still recommend getting 1, love watching all the vids pal, cheers

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Hi and yes it's a common fault on the older models easy enough sorted though. Apparently new 1s have problem sorted. I enjoy mine I think it's great fun for the money. Yes it was lucky not to be burned lol

  • @fredbaker3822

    @fredbaker3822

    2 жыл бұрын

    @@motomachinezuk8786 when you bought it was it a v3? or is that new?

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    @@fredbaker3822 not sure it's the first model they released

  • @fredbaker3822

    @fredbaker3822

    2 жыл бұрын

    @@motomachinezuk8786 i see and now on the v3 i wonder how much they have changed,

  • @TheStressD
    @TheStressD2 жыл бұрын

    Does the wpb 190 comes standard with 28mm? If so, I just watched a video on carbs and they said you can go 2mm up for best results without doing any upgrades to the internals. If its 26mm standard carb then 28mm is the best upgrade. Another great video keep up the good work.

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Well it's difficult question because ooracing who are known for pit bikes have their 190 performance kit and it's a 28mm they don't rate a 30mm so I've kinda listened to them as they know more than me. Just because bigger doesn't mean it will go faster or have more torque. Its finding that perfect ballance. I'm pleased with this so far Yes standard it 28mm mate

  • @TheStressD

    @TheStressD

    2 жыл бұрын

    @@motomachinezuk8786 True, I brought the Molkt 30mm with the 50mm OOracing filter. Let's see if it's any good as the carb only cost £19, if it ain't I'll just get the 28mm Nibbi and give that a go instead.

  • @eirikswensrud4264

    @eirikswensrud4264

    2 жыл бұрын

    The ZS190's mostly come with junk carbs. The Nibbi 28mm really wakes them up!!

  • @TheStressD

    @TheStressD

    2 жыл бұрын

    @@motomachinezuk8786 Have you ever thought of doing a 212cc big bore conversion? What do you think of them, are they worth it?

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    @@TheStressD yes but to get full potential from it you need to do fly wheel and stator plus change some wiring then add the ooracing carb so it's a big job. I don't personally think doing just the head and piston is alone is worth the money but others will disagree. Would be interesting to try 1 myself to see power difference 🤔

  • @geared4423
    @geared44232 жыл бұрын

    Would the e dirt bike have a chance against this?

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    In a straight line both stock no electric moto wouldn't have much chance but with a sl8ght modification electric will whip it. Stay tuned as its in the pipe work

  • @geared4423

    @geared4423

    2 жыл бұрын

    @@motomachinezuk8786 OK mate looking forward to it

  • @proctor107
    @proctor1072 жыл бұрын

    How have you found the gearbox on the 190?

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Typical 190 gearbox needed a retaining washer fitted

  • @proctor107

    @proctor107

    2 жыл бұрын

    @@motomachinezuk8786 I did see that video. Is that the common issue that gives them a bad name?

  • @bradleymilton9372
    @bradleymilton93729 ай бұрын

    Is this all u do is drive up and down a the fields

  • @cookedgammon6724
    @cookedgammon67242 жыл бұрын

    where do you ride

  • @motomachinezuk8786

    @motomachinezuk8786

    2 жыл бұрын

    Local land we got permission to ride on luckily