No video
Testing The Echo 7310SX Powerful Chainsaw in bad conditions
Testing the almost biggest Echo Chainsaw 7310 in hard conditions with default setting and bar length. Cutting wood with a petrol saw.
Testing the almost biggest Echo Chainsaw 7310 in hard conditions with default setting and bar length. Cutting wood with a petrol saw.
Пікірлер: 50
Loving the Echo chainsaws.
@matejkubis
2 жыл бұрын
Me too!
@CarlospuAlmeida
6 ай бұрын
Me too... I have 6 echo chainsaws. Dont want any other
I bought the USA version a few days ago, CS7310P, what a friggin beast, and its not even broke in yet!!!!!!!!! I`m a Stihl guy at heart, but Stihl prices have gone full stupid. Why buy a Stihl when you can buy THIS Echo saw for almost half the money! Not a single regret after running this Echo! Not to mention, this saw is a gas sipper compared to my Stihl`s in the same CC class with no doubts!
@matejkubis
Жыл бұрын
Very true, the chainsaw is too good for the price. use it almost daily.
@goranpavlovic9051
11 ай бұрын
Whats a gas sipper?
@kevinmccoy269
10 ай бұрын
I'm with you, Stihl prices are insane, even the used ones are damn near priced like new saws. I'd love a 500i, but not at $1700.00.
This is the best real world test I've seen on KZread too date this is the saw I will purchase. Good job guy.
@matejkubis
Жыл бұрын
Thanks! still runs great,
@Okinawa1914
5 ай бұрын
@@matejkubis2t oil mixs 50/1 ? Motul 710 2t ok oil ?
@matejkubis
5 ай бұрын
@@Okinawa1914 2T oil 1:50 Echo PowerBlend is what I use. - But Motul 2T should be OK also.
@Okinawa1914
5 ай бұрын
@@matejkubis 👌👍
Really runs great ! Got yourself a new subscriber !
@matejkubis
3 ай бұрын
thanks m8.
Klobouk dolu chlape , jsi borec s takovou kobylou ve výškách , mám 621 a 501 a jsou opravdu dobré , palec nahoru , odběr a přeju hezkou neděli .
@matejkubis
2 жыл бұрын
Děkuji moc za kometář, je to tak! Ale echo zatím paráda. At se vám daří. Hezký den.
L̶o̶v̶i̶n̶g̶ making love to the Echo chainsaws ✅
@matejkubis
2 жыл бұрын
That is amazing.
Impressive.
@matejkubis
Жыл бұрын
thanks for watching.
Enjoy the review of the Echo saw cutting.
Pěkný video. Chci se tě zeptat. Proč sis nekoupil 372xp? Cena je skoro stejná. Zajímá mě srovnání těhlech dvou pil.
@matejkubis
7 ай бұрын
Děkuji za komentář - mám více echo pil - žádná nikdy neměla problém a to jsou cenově dostupnější. O Husq jsem slyšel, že už nejsou tak dobré jako stihl a jelikož jsem fanoušek echo tak jsem nad tím nepremyslel vubec. Jinak tuto jsem koupil zanovní po známém, který měl úraz, takže za babku defacto nová a do těd jede jako drak - jediný co se musi po době vyměnit je šnek, který se otáčí a posouvá mazání lišty pumpu.
@matejkubis
7 ай бұрын
echo je velmi kvalitní značka. japonci.
@addis8268
7 ай бұрын
@@matejkubis Diky za odpověď, já jsem fanda starých Husqvaren. Ale Echo se mi moc líbí, hlavně teda ty malý s ležatým motorem. Co jsem četl tak Echo a Shindawa má nejkvalitnější pokovení válce. A ty kovaný lišty jsou perfektní. Prostě japonská kvalita, lidi je hodně podceňují. Hodně profesionálů co jsem s nima mluvil mi řeklo že Husqvarna 5xx už tolik nevydrží co předchozí řady. Ale žádnou z nich nemám a řežu málo, tak nevím.
@matejkubis
7 ай бұрын
@@addis8268 je to tak. moje zkušenost i kamarada je zatím super s echo, ale nikde to moc neříkej, nebo to bude stejně předražené jako stihl a husa :D
Daaaaaammmmnnn!!!!
@matejkubis
Жыл бұрын
thakz. a good saw
Zdravím,zvažuji koupi této pily dá se jí věřit? Dík za odpověď.
@matejkubis
Жыл бұрын
Profesionálně se s ní živím, je to držák.
@Zetor6718
Жыл бұрын
@@matejkubis Tak jsi měl pravdu je to mazec ta pila. Kubíky přibejvaj jedna radost.
@matejkubis
Жыл бұрын
@@Zetor6718 velmi rád s ní dělám.
Sounds like it surges at high rpm. Does it need tuned ? Great looking saw
@matejkubis
5 ай бұрын
idk tbh, never did I inspect the RPMs cause it runs like i prefer to do my work, but surely there are ways to make it better.
@coreyriley7160
5 ай бұрын
Thank you for the reply
@matejkubis
5 ай бұрын
@@coreyriley7160 np if you search on YT there are people doing echo tunings
@nothanks9050
5 ай бұрын
It's running at the max rpm that it's tuned for through the cut, making the '4 stroking' sound. It's tuned fine, will make money for many years trouble free. My dolmar 7910 was the same, unless you had a long bar and a big enough job it would just bounce off the max rpm through the cut. Even with a new/perfect chain you would have to lean on it with smaller bars/wood to put enough load on the engine to bring the rpm's down. These big saws really rip.
@matejkubis
5 ай бұрын
@@nothanks9050 true
Sounds like it would have NO PROBLEM running a way bigger bar. Seems too small for the engine
@matejkubis
Жыл бұрын
I can definitly rip with longer bars. But it also depends on your wood type. Have a nice day
@dieselkiki5081
Жыл бұрын
Yes, much too less load
@jamesmiller7283
Жыл бұрын
Long bar mite be too heavy for him !
Puedo ponerle una espada de 15 pulgadas.
@matejkubis
Жыл бұрын
si, oregon o husqarna o echo o dolmar etc. pero más grande es mejor
Echo/Shindaiwa 731 SX maden in USA/Mexico/ China?
@matejkubis
Жыл бұрын
Its Europe 7310 SX, made in japan.
@goranpavlovic9051
11 ай бұрын
@@matejkubishave you tried shindaiwa products?
@matejkubis
11 ай бұрын
@@goranpavlovic9051 no, but it should be almost the same as echo, so do your research on that and I Guess you should be OK with them.
Loving the Echo chainsaws.
@matejkubis
2 жыл бұрын
Indeed.