Boedy how does it stack up against the Proyama you tested yesterday for us?
@MrBooMY33 ай бұрын
I just built the smallest version of the Zenoah clone. It's 46.5cc by my measurements. 43mm piston 32mm stroke on the crank. It wants to Rev to like 14k but closer to 9k in the cut. Excellent limbing saw because of its want to Rev high.
@dubbssawshop3 ай бұрын
Def seems like one of the better ones for sure. Ive had great luck with my Jon Cutter 5800, nothing bad to say about it yet anyways. 👍🏻
@aaronpowell48853 ай бұрын
Great saws for the money. And seem to be consistently good!
@mr.somebody14933 ай бұрын
Oh, the suspense is killing me to see how this compares.
@Agustin-jo8mv2 ай бұрын
I got one of these because of you! I haven't used it extensively but its great! I have made about 50-100 cuts in a 14" trunk.
@jimholz11023 ай бұрын
Would have finished better than midpack in the Horizontal Hustle.
@0808dsmith3 ай бұрын
Love the Zenoah clones! Even the good ones are very inexpensive compared to the Husky or Stihl saws of the same size! I have 2 and both are great saws.
@Cherokee-sz7xi18 күн бұрын
Ok, I can’t afford stihl or husqvarna. So , what would you recommend for a highly skilled mechanic who uses it for medium to heavy cutting couple times a month ? Thanks.
@danmcdermott50803 ай бұрын
Are these really only $110.00 on Amazon? Seem to be a pretty decent saw.
@wildhog32172 ай бұрын
Do you have to make changes to drive pulley in order to go from a .325” pitch blade to a 3/8” blade?
@clintonbeckworth1263 ай бұрын
Cool man
@crazyfeller57043 ай бұрын
👍👍
@dougmiller24593 ай бұрын
Where do you get one do you have a link
@ragercrepair93012 ай бұрын
This is pretty damn impressive for a Chinese clone out of the box that's for sure!
@bellysup2 ай бұрын
Do you use a 50:1 or 25:1 ratio in the wemars?
@vincew.6905
8 күн бұрын
I can’t find 25:1 pre mixed
@user-ig8cu3ct7k3 ай бұрын
Question proyama or wemars for home use
@zachdiehl3401
3 ай бұрын
Either really But I’d go with the wemars myself because I have a 62cc wemars and its great they cut really nice and always start and have plenty of power to cut hard dead and aged wood I haven’t used a Proyama saw but also seems like a good saw
@TheodoreM-wp6cs3 ай бұрын
Easy start….i broke mine trying to start like that until i realized it’s an easy start. Unless you switched it out of course
@FarmlessFarmer-xs1he3 ай бұрын
I think you just sold a whole bunch of Wemars for them. You deserve a cut $$$
Пікірлер: 21
Boedy how does it stack up against the Proyama you tested yesterday for us?
I just built the smallest version of the Zenoah clone. It's 46.5cc by my measurements. 43mm piston 32mm stroke on the crank. It wants to Rev to like 14k but closer to 9k in the cut. Excellent limbing saw because of its want to Rev high.
Def seems like one of the better ones for sure. Ive had great luck with my Jon Cutter 5800, nothing bad to say about it yet anyways. 👍🏻
Great saws for the money. And seem to be consistently good!
Oh, the suspense is killing me to see how this compares.
I got one of these because of you! I haven't used it extensively but its great! I have made about 50-100 cuts in a 14" trunk.
Would have finished better than midpack in the Horizontal Hustle.
Love the Zenoah clones! Even the good ones are very inexpensive compared to the Husky or Stihl saws of the same size! I have 2 and both are great saws.
Ok, I can’t afford stihl or husqvarna. So , what would you recommend for a highly skilled mechanic who uses it for medium to heavy cutting couple times a month ? Thanks.
Are these really only $110.00 on Amazon? Seem to be a pretty decent saw.
Do you have to make changes to drive pulley in order to go from a .325” pitch blade to a 3/8” blade?
Cool man
👍👍
Where do you get one do you have a link
This is pretty damn impressive for a Chinese clone out of the box that's for sure!
Do you use a 50:1 or 25:1 ratio in the wemars?
@vincew.6905
8 күн бұрын
I can’t find 25:1 pre mixed
Question proyama or wemars for home use
@zachdiehl3401
3 ай бұрын
Either really But I’d go with the wemars myself because I have a 62cc wemars and its great they cut really nice and always start and have plenty of power to cut hard dead and aged wood I haven’t used a Proyama saw but also seems like a good saw
Easy start….i broke mine trying to start like that until i realized it’s an easy start. Unless you switched it out of course
I think you just sold a whole bunch of Wemars for them. You deserve a cut $$$