The one's on the treble part is also the value of the capacitor that I mostly use or a 1µf.. Because 1.5µf is not always available here in our place.. :) Nice detailed review and you clearly stated the value of parts and the drivers...

@Quimerateck

5 жыл бұрын

two 1uf in parallel to a 1uf in series can make 1.5uf if needed

Hi Pass 6db/octave for treble Band Pass 6db/octave for mid Low Pass 12db/octave for bass

nice idea my friend

the coil for the bass pasted welded on the negative or positive

Sir mere pas purana videocon ka cassette wala deck rkha h jiska speaker base audio wala h kya mai us speaker ko as a car woofer bana kr car k fit kr skta hu.....reply n thanks in advance

.70mm it says in the video about the gauge of the wire No. of turns also 164 turns. moreover, .71mm=22 SWG (google)

Mantul....super krative

Can I put 2 speakers 300wx2 2 tweeters 150wx2 1 midrange 150w In 1 3way of dividing network 600 watts?

Very nice 👍🏻👍🏻 🇮🇳 || Kuki

Standard 2nd order bass, 1st order roll in/out for the mid and 1st order for the horn. A 1.5 uf cap for the horn? It must be 16 ohm. Mid is 4 ohm. Bass is probably 4 ohm too.

Sir isme kitne turns or kitna thickness wala wire lena hoga

specs of the drivers pls sir.. impedance wattage watever they are..im a noob here

can you use it on 4hms.

Hai What's the specs for using it for teeeter

Boss im asking favor to you i have budjet already i plan make speaker can you teach me boss thankz

Bhai ye aapan product banke sale karo ge kya i want this

អត់ប្រើ រេស៊ីស្តង់ទេអីបង? 10 ohm 4.7 ohm បាសដូចជាឮស្រាលតិច ។

I've heard that air coil inductors are superior to iron core inductors, is that really the case?

Este trabajo es empírico hay ecuaciones y fórmulas matematicas para hacer un buen recorte de frecuencias de sonido a voluntad, sin estar probando de todo.

At home? Is that opposed to where you work?

What ... what numbers AWG you use ..

@anindyamitra5091

5 жыл бұрын

watch 3:35.

FOR WOOFER 2.2 MFD 50 V or 22 MFD 50 V.....please confirm

Good video but still no links to where you bought everything, and nor any parts list break down on what you use. It would be most helpful to us to have that information so that we could do our own builds. Thanks very much.

@raul.olmosvasquez2046

5 жыл бұрын

No dicen cuantas vueltas tiene la bobina que realiza la bobina es un crosover

cuantas vuelta le as dado a la bobina

Mare pas100 watt ka woofer ha os ko bass coil lagwne ha Moja bass coil chahiya

very good bro

il condensatore sul tweeter e giusto per filtrarlo ma errato perche si deve limitare la corrente con una resistenza se l amplificatore e 200 watt vanno tutti sul tweeter abbrustolendolo- ciao a tutti

បងខាងបាស់បេីសិនដាក់កង់ដង់50v 10ufបានអត់ ហេីយបេីសិនមិនដាក់ គឺដាក់តែសែលបានអត់បង

អរគុណបងសំរាប់វីដេអូនេះ

Thanks sir

ลมวาไปซื้อลำโพงบูทูช ในเซเว่น เพราะกว่าเยอะนะ

Cuộn này dùng cho bass bao nhiêu đại ca

queria ouvir todos juntos

The midrange is reversed, you soldered the inductor and capacitor on the negative terminal

السلام عليكم اخي محتاج دائرة بيز

I dont recommend a 50v cap for the woofer use 100volt and above

@TAPASOJHA

6 жыл бұрын

Zeus Martin Sajol Bhai ek comment 3 baar Kiyun kar rehe ho

DUDE, I'VE GOT A GOOD TWEETER IN A KLIPSCH R28F THAT WON'T WORK ON ONE SPEAKER........... COULD IT BE THE CROSSOVER ?

@ericschulze5641

3 жыл бұрын

I know it's a year later but why don't you switch tweeter's & you will get your answer

How to know the wattage of speaker

nice video pro, Hope you products audios......

Olá amigo de som eu entendo pouco,mas ouvi de um engenheiro que a bobina não pode ser muito comprida aproximadamente 3 vezes seu diamatro quanto mesmo esse valor melhor será a bobina por que ela dispersas o campo eu sou aparecido .

What is the metarials

នៅណានឹងបង

How did it sound all together?

Mau tanya gan menggunakan elco apa bera uf untu bass & di solder ke min apa plus makasih

@arifopg4440

3 жыл бұрын

pake elco non polar gan .. kaki kanan kiri sama saja ....

No dicen cuantas vueltas tienen las bobinas crosover en los parlantes y cual es el calibre del alambre

@estebanperez2435

5 жыл бұрын

Minuto 3:32 y 5:04 amigo. Saludos

@virgilreyes9514

5 жыл бұрын

en el minuto 333 lo dice 164 vueltas

@daniello8956

4 жыл бұрын

Amigos la impedancia final es a 8 ohms?

@peterperez1541

4 жыл бұрын

@@daniello8956 eso para q es?

Bass me lag jaye ga kya 18,, ke mee

very cool

queria corta o grave do galante

Muy interesante, sería bueno especificar las frecuencias de corte, gracias

@joseluissuarez6797

Жыл бұрын

31mñ4ñp4ódoDoLFñfkñriñ

បងទទួលរៀប crossover ហ្នឹងសំរាប់ជាវ ឬអត់?

this man is showing his works but no clue link on parts...this man is waiting for us to say "how much"...ah ah no way sir....psychology 101

Beautiful work. The end result is wonderful. What song is that 09:16 ? I liked it too.

@chheangsovathana

4 жыл бұрын

ProjectV8 it’s a Cambodian song

@ProjectV8

4 жыл бұрын

@@chheangsovathana Thank you

Hello sir hamare pass Ahuja srx 500 Watt sound hai aur ismein network plate Ahuja AR 0422-1 laga hai jo ki kharab ho gaya hai Isko Kaise banaen yah dusra Banakar dikhayen Jo jo ise chal Jaaye aur Kitna kharcha padega jald se jald video Banakar bataen Aisa bataen ki do speaker aur ek Pita sath mein Chali

ដាក់ដុំភ្លើងចឹងទៅលឺបុុុុុកមែនបង

@InnovationKH

6 жыл бұрын

បាទលឺបុក

doi trep ken bao nhieu tien

So that's how Klipsch speakers are made nowadays!

@byCDMC

4 жыл бұрын

LOL

good

បងអ្នកខេត្តណា

Super

6inch mid reng bass less capasitar vellyou tellmi how much ug and volts

crossover divide and filter audio sounds systems

@InnovationKH

5 жыл бұрын

Thanks for watching

NO [MUSICA]

Try putting the inductor in parallel with the mid, not in series.And slap one on the horn while your at it.

@anindyamitra5091

5 жыл бұрын

inductor must be in series with the mid, it is meant to decrease the treble sound from the mid speaker and also helps to match the overall impedance, and if you are into that , then let me tell you that you can use an inductor paralleled to the tweeter.

Y no importa si las boinas no son de los mismos ohs????

just amazing he forgot to show how many turns should you make the coil, size of the copper wire etc. everthing.

@graphenepixel8231

4 жыл бұрын

Yep, the induction, Henry's, and frequency of induction, produced by the number of turns, the width of wire, and the size of the coil.

@beto9348

4 жыл бұрын

3:33

@summer-west

4 жыл бұрын

Was going to say there are charts available in all shapes and sizes in case you might need a different inductance value... But I realized the genius Bak Lai has probably authored volumes on the subject so I wont mention it.

Coil gauge ?

? Medidas ?????

Sueño esa musica

HLA MUY BUEN TUTORIAL M LO PODES PASAR EN CASTELLANO GRACIAS SALUDO D ARGENTINA

SUPER

sir ele jobs is my favourite

LA DEMOSTRACION SE HACE EN UN SOLO PARLANTE PARA VER EL EFECTO REAL QUE CADA FILTRO PRODUCE.

@estebanperez2435

5 жыл бұрын

Con y sin filtro para notar la diferencia, si es muy funcional pero no hace las comparaciones . Saludos.

@cavernetblack9037

5 жыл бұрын

oye y que pasa con el embobinado eso no suma ohmios ? por que me da miedo conectar esos filtros sin saber si dañare mi ampli

@linea23playtek63

3 жыл бұрын

@@cavernetblack9037 creo que no, pero si que necesitaras mas potencia para moverlos

@hernanr4348

Жыл бұрын

¿por qué el capacitor en paralelo en el woofer me corta los agudos de todas las vias? Gracias.

I don't think you have enough commercials in your video

..to make tweeters sound sweet and keep from blowing them ..look into " run motor capacitors " oil in a can capacitors .. find .4 mfd and 50 DC ones are the best for under 50 watts. lower mfd for louder uses .but Hard to find.. like used with ''Vintage klipsch type E crossovers'' ..or ''oil in paper'' would work also.. like lespaul tone caps such as the bumblebee's.. talk about bell sounds ..wow klipsch no longer uses these in new or after 1988 systems ..alnico horns are the best for under 50 watts per chan ...1 watt = 5 watts with alnico ..real efficient but yeah man

Can you give me the formula of steel core coil ? thank you

Berapa meter kawat yang dibuhkan pak

បងខ្ញុំអោយបងដាក់ចំណងជើងជាអក្សរខ្មែរបានបងអត់ព្រោះខ្ញុំចង់អោយបងជួយលើកដំកើនអក្សរខ្មែរយើងបង

What is the function of capacitor here??

@anindyamitra5091

5 жыл бұрын

Capacitive reactance is being used in cross-over circuits, as well as inductive reactances.

How dare you not play the whole system together! :)

Jos

No wire guge number No wire trun number please full detial now you.

@anindyamitra5091

5 жыл бұрын

watch 3:35.

@kingbins354

4 жыл бұрын

Heheh. 🤣Watch full video

entah kenapa aku ingin tertawa

@JunaypaserM

3 жыл бұрын

Hah

Keep walking bro!

ខ្មែរតើ ស្មានតែបរទេស

@InnovationKH

5 жыл бұрын

បាទ ខ្មែរយើងទេ

@menghongekphnom4548

5 жыл бұрын

@@InnovationKH ញុមចង់អោយបងដាក់ជាភាសាខ្មែរវិញ

ภาษาอะไร

Okok

Third

ever hear of HYSTERESIS? metal core in audio is really bad.

Какой же ты медленный!!!!!

Cuantos metros de alambre son y de que calibre

@estebanperez2435

4 жыл бұрын

Exacto en metros cuanto equivale?

This is a KZread demonstration. At least make a little effort at tidiness.

ACHO ISSO UMA BOBAGEM. SE VOCÊ COLOCAR UM CAPACITOR CERÂMICO DE 2,2 MF x 250 VOLTS. PARA TODAS AS TWETERS.NO POLO + .E DE 3,3MF x 250 VOLTS. PARA A CORNETA. NO + OU EM UM FALANTE, CONE SECO, ATE DE 8" PARA SÒ SAIR MEDIOS. NÃO VEJO PRECISÃO DESSA BOBINA. PERDA DE TEMPO.

3 bucks on ebay or auto zone for free

Using metal as core for audio coils is totally not recommended. It causes distortions in the sound. Use air or plastic instead.

@anindyamitra5091

5 жыл бұрын

but that would increase the overall impedance and decrease the inductance.

@ManoelNunesOSan

5 жыл бұрын

@@anindyamitra5091 To keep the overall impedance low and increase inductance, even without metal cores, one should use higher gauge wires for the coil. Anyway, the inductance should be only high enough to keep a certain range of frequencies away from the woofer. Good quality speaker frequency dividers NEVER use metal cores.

@anindyamitra5091

5 жыл бұрын

@@ManoelNunesOSan, okay, I got it.

@linea23playtek63

3 жыл бұрын

@@anindyamitra5091 eso son barras de hierro silicio y si son recomendadas

Mmmmm

Tho y nung

eres mudo. porque no explicas

no entiendo una mierda su idioma like si no lo entiendesXDXDXDDDD

@walteralvarez4902

5 жыл бұрын

Ricardo Cifuentes yo no entendí ese enredajo

@cavernetblack9037

5 жыл бұрын

@@estebanperez2435 yo quisiera saber como calcular las vueltas de alambre para el bajo es que quiero hacer el corte en 100 hz

164 turns=w

Background sucks