Thank you for this test 👍👍 it was very informative now I know n690 is a real beast if well heat-treated ❤️🔥 thanks a lot man💪 if you will have opportunity to run a similar test with m390 it would be awesome 👍👍
@vndiy8963
Жыл бұрын
Thank you for watching the video. I did a video test 2 M390 steel knives. kzread.info/dash/bejne/a2eYj7SmpKTUeLg.html
@hammerhandedhelm
Жыл бұрын
@@vndiy8963 thank you I will watch it 😉
@tianwaifeixian Жыл бұрын
好刀
@vndiy8963
Жыл бұрын
Thanks you!!!
@TexasJuggernaut Жыл бұрын
So n690 would be ideal for bushcrafting
@vndiy8963
Жыл бұрын
Yes! definitely not a bad choice
@picsure10 ай бұрын
Good steel. Just purchased an EXtrema Ratio Contact c
@picsure
10 ай бұрын
Great Review
@vndiy8963
10 ай бұрын
Thanks bro!!!
@jistyclovek4693 Жыл бұрын
How many HRC it has?
@vndiy8963
Жыл бұрын
I trust it to reach hardness > 60hrc
@alituzun4612 Жыл бұрын
what is heat treatment information?
@vndiy8963
Жыл бұрын
I have followed the manufacturer's regimen.
@alituzun4612
Жыл бұрын
@@vndiy8963 thank you
@thichduthu94542 жыл бұрын
Anh có dạy nghề ko ạ em rất muốn học ạ
@vndiy8963
2 жыл бұрын
Mình không bạn à!
@Gyllbonus2 жыл бұрын
So is it a bad steel? It's seems to hold a edge
@vndiy8963
2 жыл бұрын
No! It's still a very good steel
@adityawibowo9572
2 жыл бұрын
@@vndiy8963 how about n695 vs n690. Which is better ?
@vndiy8963
2 жыл бұрын
@@adityawibowo9572 I can't answer because I haven't made n695 steel.
@zeewizard7198
2 жыл бұрын
Thank you for this test. I just ordered me a knife in this still grade. I'm going to be doing Bushcraft and I needed to stand up to abuse. I think it will
@vndiy8963
2 жыл бұрын
@@zeewizard7198 Thank you for watching the video
@MayGio91 Жыл бұрын
1 lưỡi như này giá tầm bao nhiêu vậy anh?
@vndiy8963
Жыл бұрын
Mình không bán phôi dao,chỉ nhận hoàn thiện full.
@82wethepeople Жыл бұрын
how easy is it to sharpen
@vndiy8963
Жыл бұрын
I used sharpened jigs
@tianwaifeixian Жыл бұрын
我想買一把
@vndiy8963
Жыл бұрын
Sorry I can't ship to another country
@duyhuathe8157 Жыл бұрын
Lò việt hay Tây vậy
@vndiy8963
Жыл бұрын
Việt bạn à
@duyhuathe8157
Жыл бұрын
@@vndiy8963 làm con thép n690 dài 22 tanto khoảng bao tiền b
@vndiy896310 ай бұрын
My new video with M390 steel blade Tested M390 steel.VNdiy kzread.info/dash/bejne/X6qau7duaKvdZaw.html
@genuinetrueblue11 ай бұрын
I broke my N690 Katana today trying to chop a plant base. That's why I am doing some research. I was obviously lied to and taught that N690 is stronger than it actually is....
@simmatlaming1837
10 ай бұрын
It gets pretty hard, but the toughness Is not that good
@vndiy8963
10 ай бұрын
I don't think N690 steel is suitable for making Katana. It has high hardness and sharpness, but lacks toughness
@vndiy8963
10 ай бұрын
I have the same opinion as you.
@mistersmith3986
3 ай бұрын
If your Katana didn't cost $50,000.00 or more, it wasn't a Katana.
@vanongnguyen25412 жыл бұрын
nghe nói like clip sẽ đc tặng :))
@vndiy8963
2 жыл бұрын
Cmt này chắc của AE nào từ Fb qua đây😁
@vanongnguyen2541
2 жыл бұрын
@@vndiy8963 anh ko biết em ạ ?
@vndiy8963
2 жыл бұрын
@@vanongnguyen2541 Khồng...mà nhìn tên quen quá kkk
Пікірлер: 47
Essa aí é bruta 👍👏👍
@vndiy8963
10 ай бұрын
Thank you so much!!!
amazing :)
@vndiy8963
Жыл бұрын
Thank you so much!!!
Thank you for this test 👍👍 it was very informative now I know n690 is a real beast if well heat-treated ❤️🔥 thanks a lot man💪 if you will have opportunity to run a similar test with m390 it would be awesome 👍👍
@vndiy8963
Жыл бұрын
Thank you for watching the video. I did a video test 2 M390 steel knives. kzread.info/dash/bejne/a2eYj7SmpKTUeLg.html
@hammerhandedhelm
Жыл бұрын
@@vndiy8963 thank you I will watch it 😉
好刀
@vndiy8963
Жыл бұрын
Thanks you!!!
So n690 would be ideal for bushcrafting
@vndiy8963
Жыл бұрын
Yes! definitely not a bad choice
Good steel. Just purchased an EXtrema Ratio Contact c
@picsure
10 ай бұрын
Great Review
@vndiy8963
10 ай бұрын
Thanks bro!!!
How many HRC it has?
@vndiy8963
Жыл бұрын
I trust it to reach hardness > 60hrc
what is heat treatment information?
@vndiy8963
Жыл бұрын
I have followed the manufacturer's regimen.
@alituzun4612
Жыл бұрын
@@vndiy8963 thank you
Anh có dạy nghề ko ạ em rất muốn học ạ
@vndiy8963
2 жыл бұрын
Mình không bạn à!
So is it a bad steel? It's seems to hold a edge
@vndiy8963
2 жыл бұрын
No! It's still a very good steel
@adityawibowo9572
2 жыл бұрын
@@vndiy8963 how about n695 vs n690. Which is better ?
@vndiy8963
2 жыл бұрын
@@adityawibowo9572 I can't answer because I haven't made n695 steel.
@zeewizard7198
2 жыл бұрын
Thank you for this test. I just ordered me a knife in this still grade. I'm going to be doing Bushcraft and I needed to stand up to abuse. I think it will
@vndiy8963
2 жыл бұрын
@@zeewizard7198 Thank you for watching the video
1 lưỡi như này giá tầm bao nhiêu vậy anh?
@vndiy8963
Жыл бұрын
Mình không bán phôi dao,chỉ nhận hoàn thiện full.
how easy is it to sharpen
@vndiy8963
Жыл бұрын
I used sharpened jigs
我想買一把
@vndiy8963
Жыл бұрын
Sorry I can't ship to another country
Lò việt hay Tây vậy
@vndiy8963
Жыл бұрын
Việt bạn à
@duyhuathe8157
Жыл бұрын
@@vndiy8963 làm con thép n690 dài 22 tanto khoảng bao tiền b
My new video with M390 steel blade Tested M390 steel.VNdiy kzread.info/dash/bejne/X6qau7duaKvdZaw.html
I broke my N690 Katana today trying to chop a plant base. That's why I am doing some research. I was obviously lied to and taught that N690 is stronger than it actually is....
@simmatlaming1837
10 ай бұрын
It gets pretty hard, but the toughness Is not that good
@vndiy8963
10 ай бұрын
I don't think N690 steel is suitable for making Katana. It has high hardness and sharpness, but lacks toughness
@vndiy8963
10 ай бұрын
I have the same opinion as you.
@mistersmith3986
3 ай бұрын
If your Katana didn't cost $50,000.00 or more, it wasn't a Katana.
nghe nói like clip sẽ đc tặng :))
@vndiy8963
2 жыл бұрын
Cmt này chắc của AE nào từ Fb qua đây😁
@vanongnguyen2541
2 жыл бұрын
@@vndiy8963 anh ko biết em ạ ?
@vndiy8963
2 жыл бұрын
@@vanongnguyen2541 Khồng...mà nhìn tên quen quá kkk
@vanongnguyen2541
2 жыл бұрын
@@vndiy8963 thế để dislike vid :))