Tesla number plate / registration plate solution fix
Tesla number plate carrier trays aren’t tidy and floppy. Here a suggested solution.
Жүктеу.....
Пікірлер: 28
@dieselestate2 ай бұрын
Perfect solution to a problem I didn’t know I had. Looks great thank you
@rico8312 жыл бұрын
wow! it's like you read my mind! Got my MYLR on Friday and the first thing to annoy me was the number plate - not only is it "flappy" but it wasn't even aligned properly. Thanks for the video, very useful!
@R0BBS4 ай бұрын
Those buzzards are making a racket... Love it 🥰
@bulbaur5910 ай бұрын
Excellent idea going to do that asap ,got my model 3 last week totally agree number plate is very poor thank you .
@williampaulrogers95832 жыл бұрын
Thanks Rory, I will get the Halfords tape and fix the plate on my hopefully October delivery model Y.
@jonathanmillar7205 Жыл бұрын
Very useful thank you. I collect my model 3 tomorrow and I’ve always disliked the bulk of their number plates. I was going to completely remove them but after watching this I think it’s a good idea to leave the back bit particularly the front one as it has that rounded mould in it. Thank you! Cheers Jon
@cotswoldmusings
Жыл бұрын
You’re very welcome Jon 😊
@bobf711 Жыл бұрын
Much better that Rory - I did the same with my Model 3. I did find however that during the very hot summer we had last year (40 degrees, you might recall,) the bow in the front plate eventually caused the front plate to begin to come loose as the glue melted. I was able to re-mount it, but lost a little confidence in it staying put as the blistering heat continued, so I drilled the front plate and put screws through aligned with the holes which mount the back mount onto the car. Appropriately coloured plastic caps cover the screw heads, so still much neater than the Tesla 'original' and the screws hold the bow in the front plate perfectly. The rear plate has stayed put without any problem, but being flatter you would expect that.
@cotswoldmusings
Жыл бұрын
Interesting Bob, looks like we’ve been lucky 🍀 as ours has stayed fixed. I did overdo the fixing tape though 🤞
@rowedav Жыл бұрын
Nice video, I'm going to do the same on my M3P. Thanks!
@fraazhussain Жыл бұрын
Really useful video, thank you!
@chrisallen7162 Жыл бұрын
Thanks Rory. I have the exact same car coming next week (been a long wait) and changing from a Macan Like you. I also have an X personalised plate like you so appreciate all the advice on this and the other videos. Thanks from a fellow Midlander 👍
@mylosrobertos99 Жыл бұрын
The issue with number plates being legal, other than lettering size and spacing, is that the supplier needs to have their details on the plate. I see some small print on your plates so assume that is the suppliers details. Looks good to me!
@ariag.a3620 Жыл бұрын
Very nice!
@robertking58582 жыл бұрын
Hi Rory, I too have removed the ugly Tesla plate holder, and stuck the number plate straight into the bodywork at the rear, on the front I have completely removed the holder and purchased a self adhesive number plate, which is adhered straight onto the bodywork , both of these number plates are completely legal, as they are the correct colour, and are reflective as they should be
@cotswoldmusings
2 жыл бұрын
Interesting 😊
@farazqureshi1614
Жыл бұрын
What happens if/when you need to remove the plate? Is there not a chance of damaging the paint?
@robertking5858
Жыл бұрын
@@farazqureshi1614 Hi Faraz, as far as Iam aware, the self adhesive number plates are made of vinyl, exactly the same material as used when wrapping a car, therefore they shouldn’t damage the paint when removed. I think the company selling these plates would be in serious trouble if it damaged the paintwork .
@maxflight777 Жыл бұрын
You already have a small stain on the rear luggage compartment! May I kindly recommend the Tesla OEM cover . It’s expensive, but works well. Best wishes.
@s10lucky Жыл бұрын
Brilliant solution. Out of interest did changing to a private registration cause you any agro with the Tesla app etc? I am about to change mine over for one I have on retention but didn’t know if it messes with anything Tesla software based.
@cotswoldmusings
Жыл бұрын
No, not at all as everything is VIN based for that reason with all brands.
@cotswoldmusings
Жыл бұрын
It is always wise to make a note of the original registration number in case support or someone doesn’t recognise the cherished number
@ravkhangurra7522 Жыл бұрын
Great video, do you have a link for the tape you used., thanks
@cotswoldmusings
Жыл бұрын
I’ll try and find it for you
@ravkhangurra7522
Жыл бұрын
@@cotswoldmusings Thanks
@benw55612 жыл бұрын
Can I ask where you got the plates and are they 3D or 4D gel?
@cotswoldmusings
2 жыл бұрын
Gel online demon plates I think. I’ll check later 😊
Пікірлер: 28
Perfect solution to a problem I didn’t know I had. Looks great thank you
wow! it's like you read my mind! Got my MYLR on Friday and the first thing to annoy me was the number plate - not only is it "flappy" but it wasn't even aligned properly. Thanks for the video, very useful!
Those buzzards are making a racket... Love it 🥰
Excellent idea going to do that asap ,got my model 3 last week totally agree number plate is very poor thank you .
Thanks Rory, I will get the Halfords tape and fix the plate on my hopefully October delivery model Y.
Very useful thank you. I collect my model 3 tomorrow and I’ve always disliked the bulk of their number plates. I was going to completely remove them but after watching this I think it’s a good idea to leave the back bit particularly the front one as it has that rounded mould in it. Thank you! Cheers Jon
@cotswoldmusings
Жыл бұрын
You’re very welcome Jon 😊
Much better that Rory - I did the same with my Model 3. I did find however that during the very hot summer we had last year (40 degrees, you might recall,) the bow in the front plate eventually caused the front plate to begin to come loose as the glue melted. I was able to re-mount it, but lost a little confidence in it staying put as the blistering heat continued, so I drilled the front plate and put screws through aligned with the holes which mount the back mount onto the car. Appropriately coloured plastic caps cover the screw heads, so still much neater than the Tesla 'original' and the screws hold the bow in the front plate perfectly. The rear plate has stayed put without any problem, but being flatter you would expect that.
@cotswoldmusings
Жыл бұрын
Interesting Bob, looks like we’ve been lucky 🍀 as ours has stayed fixed. I did overdo the fixing tape though 🤞
Nice video, I'm going to do the same on my M3P. Thanks!
Really useful video, thank you!
Thanks Rory. I have the exact same car coming next week (been a long wait) and changing from a Macan Like you. I also have an X personalised plate like you so appreciate all the advice on this and the other videos. Thanks from a fellow Midlander 👍
The issue with number plates being legal, other than lettering size and spacing, is that the supplier needs to have their details on the plate. I see some small print on your plates so assume that is the suppliers details. Looks good to me!
Very nice!
Hi Rory, I too have removed the ugly Tesla plate holder, and stuck the number plate straight into the bodywork at the rear, on the front I have completely removed the holder and purchased a self adhesive number plate, which is adhered straight onto the bodywork , both of these number plates are completely legal, as they are the correct colour, and are reflective as they should be
@cotswoldmusings
2 жыл бұрын
Interesting 😊
@farazqureshi1614
Жыл бұрын
What happens if/when you need to remove the plate? Is there not a chance of damaging the paint?
@robertking5858
Жыл бұрын
@@farazqureshi1614 Hi Faraz, as far as Iam aware, the self adhesive number plates are made of vinyl, exactly the same material as used when wrapping a car, therefore they shouldn’t damage the paint when removed. I think the company selling these plates would be in serious trouble if it damaged the paintwork .
You already have a small stain on the rear luggage compartment! May I kindly recommend the Tesla OEM cover . It’s expensive, but works well. Best wishes.
Brilliant solution. Out of interest did changing to a private registration cause you any agro with the Tesla app etc? I am about to change mine over for one I have on retention but didn’t know if it messes with anything Tesla software based.
@cotswoldmusings
Жыл бұрын
No, not at all as everything is VIN based for that reason with all brands.
@cotswoldmusings
Жыл бұрын
It is always wise to make a note of the original registration number in case support or someone doesn’t recognise the cherished number
Great video, do you have a link for the tape you used., thanks
@cotswoldmusings
Жыл бұрын
I’ll try and find it for you
@ravkhangurra7522
Жыл бұрын
@@cotswoldmusings Thanks
Can I ask where you got the plates and are they 3D or 4D gel?
@cotswoldmusings
2 жыл бұрын
Gel online demon plates I think. I’ll check later 😊
Interested in reviewing our products?😀