Tesla Model S Full Brake Job & Hub Bearing Replacement
Автокөліктер мен көлік құралдары
This is my 2013 Tesla Model S 85 project car. The brakes are shot, the calipers have corrosion and bearings are making some noise.
Links:
Brake Pad& Rotor Set: amzn.to/47SMQuI
Hub Bearings: amzn.to/47V6iXD
Use my Tesla referral link if you're ordering a new Tesla for exclusive savings and incentives: www.tesla.com/referral/laura4...
Get your Tesla accessories here: amzn.to/3QXDuqI
My Camera Setup
Gopro Hero12: amzn.to/3IJqAsW
Gopro Media Mod: amzn.to/3THpzIn
Tripod: amzn.to/43qcHt6
DJI Microphone: amzn.to/490Ktqh
DJI Drone: amzn.to/4alB3Xx
Be sure to Like and Subscribe!
Video Links:
Painting the brake calipers: • Painting Brembo Brake ...
Bleeding The Brakes: • How To Change Brake Fl...
Here is a link to the playlist for all the video for this project car: • 2013 Tesla Model S 85 ...
For Promotional opportunities or business inquires email me at: Myksgarage11@gmail.com
#myksgarage
#teslamodels
#teslamodelx
#brembobrake
#brakecaliper
#teslamodely
#teslamodely
#teslamodel3
#teslabattery
The above links are my Amazon affiliate links, Which by using will support the channel. Thank you!
Пікірлер: 14
It amazes me how much you know about the mechanica l part without any mechanical background.
@Myksgarage
4 ай бұрын
Appreciate that, this part was not much different than other vehicles so it wasn’t too bad. Thanks for watching!
I still recommend that you lubricate the slide pins of the brake pads with ceramic grease then you are less likely to corrode
@Myksgarage
4 ай бұрын
Good tip!
Tape will only work so long with that parking brake connector. The second you get some decent rain while driving you will get a parking brake failure. Ask me how I know.
@Myksgarage
4 ай бұрын
Thanks for sharing your experience
Great job Mike!
@Myksgarage
4 ай бұрын
Thanks buddy!
Really enjoyed your well put video Mike! We have a 2014 P85+ that will need to get the front bearings replaced, u inspired me to do it myself :) do you have the link for the front hub bearings?
@Myksgarage
3 ай бұрын
These are the ones I used for the front: www.ebay.com/itm/314039044906?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=RGgc_m9cTWO&sssrc=4429486&ssuid=wd61b5SvTMO&var=&widget_ver=artemis&media=COPY
How much ft-lbs torque did you tighten the axle nuts to?
@Myksgarage
2 ай бұрын
Like 280ft lbs
I’m the first! 😊
@Myksgarage
4 ай бұрын
Welcome!!