Super helpful and rescued some sagging blinds for me. Top man. 👍🏼👍🏼👍🏼

Just what I needed thank you

I have the roller blind and used a screw driver to tighten the plastic piece inside but it’s not adding tension ??

@Mac-dt6kw

3 жыл бұрын

I’ve got the exact same problem

Hi Colin, nice video, I had to replace a Venetian blind on my son's window I took some photos as I was doing it but then struggled to re-cord correctly after feeding the cord through the blinds and had a real problem getting the cords through the tiny hole where the screw lock is but I managed it - however the blind does not work correctly, do you have a video that would help, please?

@allanbarlow685

2 жыл бұрын

I'll take that as a No then Colin?

Help! We have the roller blind and I stupidly took the red tag out while the blind was up, it obviously came down and now the allen key method isn't working. I'm screwing round and round and it's not fixing any tension. Do I somehow have to roll the blind back up manually first? 😢

Very helpful video. May I ask how you would take the pleated blind unit out of the window frame? Do I have to just prise it off? Or is there fixings under the corners? 😃

@conservatoryroofblindsnet

7 ай бұрын

Press the part of the bracket that protrudes from each punch hole and it should release the frame from the bracket

@markcuthbertson4297

7 ай бұрын

@@conservatoryroofblindsnet thankyou very much. 👍😃

My pleated blinds bunch up, not folding properly. They deem to be tight to one side of the frame but not the other, catching on the window frame, any ideas?

How are you tightening the nylon grommet? Which tool do you use?

@conservatoryroofblindsnet

3 жыл бұрын

The nylon is tightened by a grommet that sits behind the bottom rail and we have a specially adapted to designed to fit the adjusting nut of the grommet

Do you know what thickness cord are in those perfect fit blinds? Thanks

@conservatoryroofblindsnet

4 жыл бұрын

Hi, both the support nylon and the control cords are under 1mm thick

@Aw-co8ir

4 жыл бұрын

@@conservatoryroofblindsnet Thanks

Hi. Is it possible repair a perfect fit blind if the cord breaks?? Came to slide it down and it literally fell to pieces. Have taken it out of the window in anticipation that we can

@conservatoryroofblindsnet

3 жыл бұрын

It will probably need to be re-corded if the cord has snapped as you can't just tie a knot in it as the Blind needs to slide up and down smoothly

@lorrainenaden7921

3 жыл бұрын

Thanks for your speedy response

@paredetel

3 жыл бұрын

Is there any guidance on how to re-cord when the original cord had snapped out? Thanks.

@allanbarlow685

3 жыл бұрын

@@paredetel I need this info too, as my cord goes thro the base of the frame.

@allanbarlow685

2 жыл бұрын

@@paredetel Hi did you ever find a video - I still haven't and Colin isn't replying....