Temptress Build 5: Cutting Bulkheads 4 & 9 With Shaper Origin
Тәжірибелік нұсқаулар және стиль
Temptress Boat Build: A series of videos documenting the modern cold molded wood boat building process. The boat is a mahogany runabout "Temptress" kitted by Dan Lee Boat Building.
In this video, I use the Shaper Origin CNC router, from Shaper Tools, to cut out the bulkheads 4 and 9.
The CNC cutting will be done with the Shaper Origin CNC router:
/ @shapertools
@Shapertools
You can see the original plans at Dan Lee Boat Building:
www.youtube.com/ @DanLeeBoatbuilding
@DanLeeBoatbuilding
And the Temptress plans at:
• Temptress - Boat Build...
Пікірлер: 6
Thanks for this. I was looking for a real time look at how the SO performs cutting large profiles out of full sheets. A useful video.
@Polymerman
6 ай бұрын
Glad it was helpful! Thanks for watching.
@turnerdavidturner
6 ай бұрын
@@Polymerman I should also add, that your project is also super cool. I came for the shaper original demo, but stayed for the video series. I’m not doing a lot of boat building, but picked up a couple other tips that are useful for my furniture work (in particular the jig for your curved components in videos 21/22, or thereabouts).
@BobKody
6 ай бұрын
Thank you.
does the Origin get fussy after those first, inner pieces get cut and move slightly while you are cutting the big piece out? because the tape layout was disturbed a bit?
@Polymerman
Жыл бұрын
Good question. As long as there are enough dominos that have not been cut, the Shaper Origen works well. That said, when I cut out a lot of small gussets, the Shaper Origin can signal that there are not enough full dominos. In video 6, I had to add more shaper tape and add a scan to the original workspace scan.