Visit fletcherhandcraftedguitars.com for more information
Жүктеу.....
Пікірлер: 48
@samohtdivad8 жыл бұрын
you took your templates to the next level...with the pickup and spring cav cutout..
@adrian247418 жыл бұрын
You are simply the best. I have used your videos to start making guitars at 17. Thanks
@luffegun8 жыл бұрын
So happy to see you're back, Fletch! encore! looking forward to more content.
@bonzo28428 жыл бұрын
Very glad to see your videos again!!
@MarkLindsayCNC8 жыл бұрын
I'm very happy to see you post again, David. I've always enjoyed your videos and have learned more from you than any other source - more than I can quantify. I know that you're a very busy man, but I do hope you'll continue to post whenever you have the time. Cheers!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Mark Lindsay Thanks Mark !
@loopmasta51048 жыл бұрын
Thank you for all your great videos. After watching all of them i started my own Telecaster build. And every time i'm in trouble i get back to your channel for more inspiration. All the best and greetings from Cologne, Germany.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Loop Masta Thankyou very much, glad you find them useful
@FesixGermany8 жыл бұрын
Another video from you, nice! Seems like the CNC does a good job, I want to build myself a smaller one but unfortunately I don't have enough space even for this. Keep the good work up!
@hondablack18 жыл бұрын
Slick ! Well done mate.
@j-ohara8 жыл бұрын
Wow, thanks for sharing! Really glad you're back!
@FletcherHandcraftedGuitars
8 жыл бұрын
+João Ohara Thankyou :-)
@himonides8 жыл бұрын
ordered! great to see you back Sir!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Evangelos Himonides Thanks Evangelos :-)
@MrFengen8 жыл бұрын
Can you do a Strat with SEC neck joint template set? 2 stud tremolo..
@GregsGarage8 жыл бұрын
Glad to see that cnc is kicking out good stuff!!! I have a tool set I'm working on for compound radius fretboards... I'd like to send you a set and see what you think... It will be about another month until I have the final version ready.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Greg's Garage Thanks Greg. Upload a vid on your compound radius tool so I can see what it does !! :-)
@acowen8 жыл бұрын
Great work here, and well thought out templates. How are you finding the X-Carve? I was planning on picking one up for the workshop - to cut templates/pick guards/body outlines etc. I'd heard that the 1000x1000mm version suffered from droop in the center of the gantry, effecting Z axis accuracy. Have you noticed this? I had planned to reduce the width of the Y axis to 500mm in any case, to make the thing fit in my workshop, which would effectively stiffen up the gantry. Do you think it's a reliable tool?
@PeteRaine9728 жыл бұрын
Glad your back! Love your workmanship! Might I suggest including a neck "side" template as well in your kits, and definitely a LP style in addition to the S & T styles would be awesome! Cheers!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Pete Raine Good idea
@alfonsolermadominguez62148 жыл бұрын
I am glad you are back
@FletcherHandcraftedGuitars
8 жыл бұрын
+Alfonso Lerma Dominguez Thanks Alfonso :-)
@normadomras71197 жыл бұрын
Ralph Domras how deep do I rout the back of the fender stratocaster.
@shelby504116 жыл бұрын
And wat machine did u upgrade too....prob a 4x4 or 4x8 unit?
@PavelDashkov8 жыл бұрын
Excellent! I think you could make a holes on the neck pocket template in the same place like pickguard holes. For fixing it on body by screws. I think it would be precisely.
@FletcherHandcraftedGuitars
8 жыл бұрын
+PavelDashkov Yes, might add those in.
@kimtoro1007 жыл бұрын
high technology,congratulations
@parklaneguitars73205 жыл бұрын
What program is this please?
@plexibreath7 жыл бұрын
Do you do custom shape templates? I have a guitar idea I want to build, it's not an existing shape but one of my own design, would I be able to send you something like a DXF file of the shapes I'd need then you can cut them out for me on your CNC machine?
@ciri1518 жыл бұрын
Woa I thought you quit youtube. You should upload more often if possible. Your work screams quality :)
@italianguitargarage7088 жыл бұрын
Hi David, have you strenghten the machine in any way, or do you use it "stock"?
@bobbyquitzon6 жыл бұрын
hello, what are you using to cut the templates?
@concordiamusicbali86267 жыл бұрын
wow super...
@shelby504116 жыл бұрын
Hi...i noticed ur x axis on the xcarve has bolts going through center,,,,whats that for?...and kick ass template
@FletcherHandcraftedGuitars
6 жыл бұрын
I haven't had the X-Carve for a couple of years now. I upgraded to a professional machine.
@exit98Studios8 жыл бұрын
Excellent work. I really like the small inserts to separate different depths of cuts. That really helps minimize on extra unneeded templates.
@danlc2
2 жыл бұрын
Hi
@evangunning28408 жыл бұрын
How would you do this without a CNC machine?
@rumbachumba330
8 жыл бұрын
well first you'd need to trace out or draw your design to scale on paper, or if you know how, design it on your computer much like architects CAD files, get it printed, then stick the paper on some MDF and use whatever tools you have available to get the MDF to shape, like a jigsaw, files, sandpaper etc. If there's any spots that need smoothing do it on the template, MDF is easier to work with than hard woods. Sorry it took so long to reply.
@LeeCarmichael8 жыл бұрын
Hi David, what speed are you running your dewalt spindle when cutting hard woods? And what is your typical IPM/ depth of cut? Thanks.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Lee Carmichael Hi Lee, I usually cut @ between setting 3 and 4 - I manually adjust as I cut some scrap to fine tune it. The speed I cut @ 1800mm/min and 3.175mm DOC for soft woods and 2mm for hard woods
@LeeCarmichael
8 жыл бұрын
+Fletcher Handcrafted Guitars thanks for the fast reply David! I think we have had our machine for a few weeks now and we are still ironing out the kinks. Have you done any modifications to your machine yet or still running it stock?
@FletcherHandcraftedGuitars
8 жыл бұрын
check the inventables forum for mods, lots listed there. I've done the X axis stiffening mod with the bolts, thats all I've done
@LeeCarmichael
8 жыл бұрын
+Fletcher Handcrafted Guitars I think I may have read every thread on that forum ha. That is the mod we are planning on doing. Good to hear you are getting good speeds out of your machine. All the best.
@droy3338 жыл бұрын
Woohoo he's back. So whens the next build? :P Build me a LP Junior in black & green yet? :P
@FletcherHandcraftedGuitars
8 жыл бұрын
+Troy Graham Oh I forgot about that ;-)
@berkc068 жыл бұрын
Kevin Macleold - Slow Burn
@shelby504116 жыл бұрын
Ok...yes xcarve is ok for hobbyist but not daily use....give me ur honest opinion of xcarve....i have many opinions...and arent good
Пікірлер: 48
you took your templates to the next level...with the pickup and spring cav cutout..
You are simply the best. I have used your videos to start making guitars at 17. Thanks
So happy to see you're back, Fletch! encore! looking forward to more content.
Very glad to see your videos again!!
I'm very happy to see you post again, David. I've always enjoyed your videos and have learned more from you than any other source - more than I can quantify. I know that you're a very busy man, but I do hope you'll continue to post whenever you have the time. Cheers!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Mark Lindsay Thanks Mark !
Thank you for all your great videos. After watching all of them i started my own Telecaster build. And every time i'm in trouble i get back to your channel for more inspiration. All the best and greetings from Cologne, Germany.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Loop Masta Thankyou very much, glad you find them useful
Another video from you, nice! Seems like the CNC does a good job, I want to build myself a smaller one but unfortunately I don't have enough space even for this. Keep the good work up!
Slick ! Well done mate.
Wow, thanks for sharing! Really glad you're back!
@FletcherHandcraftedGuitars
8 жыл бұрын
+João Ohara Thankyou :-)
ordered! great to see you back Sir!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Evangelos Himonides Thanks Evangelos :-)
Can you do a Strat with SEC neck joint template set? 2 stud tremolo..
Glad to see that cnc is kicking out good stuff!!! I have a tool set I'm working on for compound radius fretboards... I'd like to send you a set and see what you think... It will be about another month until I have the final version ready.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Greg's Garage Thanks Greg. Upload a vid on your compound radius tool so I can see what it does !! :-)
Great work here, and well thought out templates. How are you finding the X-Carve? I was planning on picking one up for the workshop - to cut templates/pick guards/body outlines etc. I'd heard that the 1000x1000mm version suffered from droop in the center of the gantry, effecting Z axis accuracy. Have you noticed this? I had planned to reduce the width of the Y axis to 500mm in any case, to make the thing fit in my workshop, which would effectively stiffen up the gantry. Do you think it's a reliable tool?
Glad your back! Love your workmanship! Might I suggest including a neck "side" template as well in your kits, and definitely a LP style in addition to the S & T styles would be awesome! Cheers!
@FletcherHandcraftedGuitars
8 жыл бұрын
+Pete Raine Good idea
I am glad you are back
@FletcherHandcraftedGuitars
8 жыл бұрын
+Alfonso Lerma Dominguez Thanks Alfonso :-)
Ralph Domras how deep do I rout the back of the fender stratocaster.
And wat machine did u upgrade too....prob a 4x4 or 4x8 unit?
Excellent! I think you could make a holes on the neck pocket template in the same place like pickguard holes. For fixing it on body by screws. I think it would be precisely.
@FletcherHandcraftedGuitars
8 жыл бұрын
+PavelDashkov Yes, might add those in.
high technology,congratulations
What program is this please?
Do you do custom shape templates? I have a guitar idea I want to build, it's not an existing shape but one of my own design, would I be able to send you something like a DXF file of the shapes I'd need then you can cut them out for me on your CNC machine?
Woa I thought you quit youtube. You should upload more often if possible. Your work screams quality :)
Hi David, have you strenghten the machine in any way, or do you use it "stock"?
hello, what are you using to cut the templates?
wow super...
Hi...i noticed ur x axis on the xcarve has bolts going through center,,,,whats that for?...and kick ass template
@FletcherHandcraftedGuitars
6 жыл бұрын
I haven't had the X-Carve for a couple of years now. I upgraded to a professional machine.
Excellent work. I really like the small inserts to separate different depths of cuts. That really helps minimize on extra unneeded templates.
@danlc2
2 жыл бұрын
Hi
How would you do this without a CNC machine?
@rumbachumba330
8 жыл бұрын
well first you'd need to trace out or draw your design to scale on paper, or if you know how, design it on your computer much like architects CAD files, get it printed, then stick the paper on some MDF and use whatever tools you have available to get the MDF to shape, like a jigsaw, files, sandpaper etc. If there's any spots that need smoothing do it on the template, MDF is easier to work with than hard woods. Sorry it took so long to reply.
Hi David, what speed are you running your dewalt spindle when cutting hard woods? And what is your typical IPM/ depth of cut? Thanks.
@FletcherHandcraftedGuitars
8 жыл бұрын
+Lee Carmichael Hi Lee, I usually cut @ between setting 3 and 4 - I manually adjust as I cut some scrap to fine tune it. The speed I cut @ 1800mm/min and 3.175mm DOC for soft woods and 2mm for hard woods
@LeeCarmichael
8 жыл бұрын
+Fletcher Handcrafted Guitars thanks for the fast reply David! I think we have had our machine for a few weeks now and we are still ironing out the kinks. Have you done any modifications to your machine yet or still running it stock?
@FletcherHandcraftedGuitars
8 жыл бұрын
check the inventables forum for mods, lots listed there. I've done the X axis stiffening mod with the bolts, thats all I've done
@LeeCarmichael
8 жыл бұрын
+Fletcher Handcrafted Guitars I think I may have read every thread on that forum ha. That is the mod we are planning on doing. Good to hear you are getting good speeds out of your machine. All the best.
Woohoo he's back. So whens the next build? :P Build me a LP Junior in black & green yet? :P
@FletcherHandcraftedGuitars
8 жыл бұрын
+Troy Graham Oh I forgot about that ;-)
Kevin Macleold - Slow Burn
Ok...yes xcarve is ok for hobbyist but not daily use....give me ur honest opinion of xcarve....i have many opinions...and arent good