Thanks for sharing your knowledge.

Thanks for the information 😊

Amzing ❤❤

Really useful!

Ty ^^❤

i opened it and the gray and white womt lock, because the mother board is on the way but i don't want to push it because it might break

@aihnsvlog

3 ай бұрын

If you installed the mother board properly but kind of stocked? try to check the cover of the "hot / cold" switch if placed upside-down. otherwise, it won't fit. The outer cover will fitted if it's not bumpy.

Can u pls send the link to your first video in which you disassembled all the parts?

@aihnsvlog

3 ай бұрын

This is the only video I made disassembling this machine. The first one was my first time after the laminating film jammed. ( kzread.info/dash/bejne/oYKZxsiOlKfgZ7Q.html )

Hello po

@aihnsvlog

Күн бұрын

Hi po

You shouldn't use black cloth on your table

Sakin po bigla n lng d n gumgna akin, sa shopee q p kc binili ang hassle mag return refund,, 4x ko lng ngmit in a couple of minutes , then aya n mag on i think nag over heat, kc amoy wire

@aihnsvlog

10 ай бұрын

You mean, ni pag ikot ayaw? Try mo e plugin sa outlet. Make sure na naka "on" ang machine mo. If hnd umikot, possible issue sa wiring or yung motor nya. Since wala kang idea sa mga bagay na yan. Kailangan mong madala sa technician yan malapit sa inyo. Otherwise, makakabili ka ng bago. If mahal ang charge sa pagpapa ayos, for me bili ka nalang talaga ng bago.

bhai mujh sy fiting nahi ho rahi on off wala botton ni lag rha

@aihnsvlog

Жыл бұрын

Hnd kopo naintindihan ang tanong.🥴

Motor is not functioning

@aihnsvlog

3 ай бұрын

Then it has to be replaced.

Mine didn't function after I open it 😢

@aihnsvlog

3 ай бұрын

I just checked my Channel and Oh my reply to you fails. I have a lot of questions in my head, like why did you open your machine in the firts place if it functions well? But if you experienced some error like the film jammed, if you open it make sure to be careful with the wires. So your problem is, it didn't function? Does it mean that when you plug in the wire, the roller won't turn? it could be the motor didn't work. OR when you plug in, there's no power at all? In this case, if we no nothing about electrical, what we need to do is bring the machine to the nearest technician.

Hello po sinunod ko naman po yung steps nyo pero po bakit ganon? Ayaw po uminit noon akin pag po nilagay ko na sa "Hot"?

@aihnsvlog

Жыл бұрын

If bago pa ang machine mo at may warranty, ipa ubaya mo sa kinuhaan mo. If hnd yan bago at umiikot pero hnd umiinit, need mo napo ng technician para ma diagnose if meron problema sa wires nya or need ng palitan ang roller nya.

Where is aliment purches

@aihnsvlog

10 ай бұрын

I didn't get what your question Sir.