Tanks for all videos!!!! but i need view the platter link Xl !!! LOL !!! tanks again!!!
@GearItFirst11 жыл бұрын
Me, too.. HAHAHA. Sorry, life got REALLY hectic. Let me see if I can do it this week. I live in FL and it's been too humid to paint..
@zogzog10638 жыл бұрын
This is what I have done with my platter. I have left the top alone, because it is covered with a slipmat; but I have scrubbed the strobe dots off completely. I did with with Acetone and a wire brush. I used a smallish brush that looks a bit like a toothbrush. It requires some elbow grease, but the result is a bare aluminium. The Strobe works just as well - ie the black background is not needed. As a finishing touch I polished the aluminium with Autosol. Incidentally it is a good idea to get a quality aftermarket mat, say from Funkfirm or Oyaide. The reason is that the rubber underneath the platter is not correctly applied and so the platter has a lot of resonance with is a bad thing - a better platter will ameliorate this.
@GearItFirst11 жыл бұрын
Possibly tomorrow!
@GearItFirst11 жыл бұрын
Been swamped. I'll do it ASAP!
@buset19748 жыл бұрын
I've bought parts tune arms parts from ebay years ago and it still not put together yet. I don't think have a good hands and skill like you are. What u done is my dream for my turntable
@GearItFirst
8 жыл бұрын
+buset1974 Find an old broken 1200 and practice on it!
@fred2ka411 жыл бұрын
Nice videos! Still waiting for # XI ;)
@prestonzanemusic10 жыл бұрын
Please post a "how to paint the platter".... thanks for the vids...
@GearItFirst
10 жыл бұрын
I know I know.. I've been slacking. Coming soon-- promise!!!
@kishspence220911 жыл бұрын
Hey where's the platter paint job vid? I'd love to see that!
@scottsound47118 жыл бұрын
watched all parts very well dun,would like to see you do a video series same as this but with a Vestax PDX 2000 deck :) thanks.
@GearItFirst
8 жыл бұрын
+Scott Sound I don't use Vestax nor do I know them well enough to take them apart. So sorry. Thank you for watching, though!
@yxooo9 жыл бұрын
still no platter video?
@demogoro10 жыл бұрын
hello how are you? as the name of that glue you use for the land. thanks
@GearItFirst11 жыл бұрын
Hope these help!
@kronjohnson9 жыл бұрын
watched your whole series to find the platter paint part only to find out it doesnt exist
@GearItFirst
9 жыл бұрын
It got deleted. I'll have to refilm
@giuseppedisanto54037 жыл бұрын
Amazing video! 3:00 is it a special kind of glue? Can i use Attak?
@EzyMonies8 жыл бұрын
Hey nice series, very informative... Question though, when are you gonna upload the bonus video?
@GearItFirst
8 жыл бұрын
+EzyMonies No idea where it's at. Lemmefind my techs and I'll repaint it. :)
@EzyMonies
8 жыл бұрын
+Arnoldo Offermann that's great! I have a pair I'm going to restore and these tutorials are the best I've seen on KZread
@GearItFirst
8 жыл бұрын
Thank you!!!
@STEREO76STUDIO11 жыл бұрын
We still waiting platter paint (((
@stardoshinrg9 жыл бұрын
and the serigraphy?
@Whatsofreakingever4 жыл бұрын
STILLLLLLLL waiting for the platter video ;(
@GearItFirst
4 жыл бұрын
Not gonna happen, sorry. But there are other tutorials that show it!
Пікірлер: 33
great series!!
Excellent job, gonna have to give it a try,
Tanks for all videos!!!! but i need view the platter link Xl !!! LOL !!! tanks again!!!
Me, too.. HAHAHA. Sorry, life got REALLY hectic. Let me see if I can do it this week. I live in FL and it's been too humid to paint..
This is what I have done with my platter. I have left the top alone, because it is covered with a slipmat; but I have scrubbed the strobe dots off completely. I did with with Acetone and a wire brush. I used a smallish brush that looks a bit like a toothbrush. It requires some elbow grease, but the result is a bare aluminium. The Strobe works just as well - ie the black background is not needed. As a finishing touch I polished the aluminium with Autosol. Incidentally it is a good idea to get a quality aftermarket mat, say from Funkfirm or Oyaide. The reason is that the rubber underneath the platter is not correctly applied and so the platter has a lot of resonance with is a bad thing - a better platter will ameliorate this.
Possibly tomorrow!
Been swamped. I'll do it ASAP!
I've bought parts tune arms parts from ebay years ago and it still not put together yet. I don't think have a good hands and skill like you are. What u done is my dream for my turntable
@GearItFirst
8 жыл бұрын
+buset1974 Find an old broken 1200 and practice on it!
Nice videos! Still waiting for # XI ;)
Please post a "how to paint the platter".... thanks for the vids...
@GearItFirst
10 жыл бұрын
I know I know.. I've been slacking. Coming soon-- promise!!!
Hey where's the platter paint job vid? I'd love to see that!
watched all parts very well dun,would like to see you do a video series same as this but with a Vestax PDX 2000 deck :) thanks.
@GearItFirst
8 жыл бұрын
+Scott Sound I don't use Vestax nor do I know them well enough to take them apart. So sorry. Thank you for watching, though!
still no platter video?
hello how are you? as the name of that glue you use for the land. thanks
Hope these help!
watched your whole series to find the platter paint part only to find out it doesnt exist
@GearItFirst
9 жыл бұрын
It got deleted. I'll have to refilm
Amazing video! 3:00 is it a special kind of glue? Can i use Attak?
Hey nice series, very informative... Question though, when are you gonna upload the bonus video?
@GearItFirst
8 жыл бұрын
+EzyMonies No idea where it's at. Lemmefind my techs and I'll repaint it. :)
@EzyMonies
8 жыл бұрын
+Arnoldo Offermann that's great! I have a pair I'm going to restore and these tutorials are the best I've seen on KZread
@GearItFirst
8 жыл бұрын
Thank you!!!
We still waiting platter paint (((
and the serigraphy?
STILLLLLLLL waiting for the platter video ;(
@GearItFirst
4 жыл бұрын
Not gonna happen, sorry. But there are other tutorials that show it!