Greetings from England and thank you so much for doing this video, so straightforward and easy to follow, even for a novice like me.. I have an SL B2, not used it as a main deck for a while and was considering getting rid, but after watching this I'm definitely going to keep it and use it more. Cheers again, great job pal, looking forward to more videos from you.

@AdamHiFi

3 жыл бұрын

so glad to hear - thanks for taking the time to comment. good luck and if u run into any roadblocks let me know

@bobdarlington4634

3 жыл бұрын

@@AdamHiFi It's all going well so far, I've just ordered a new belt then it will be all set to go. I'm also considering a new cartridge/stylus, to finish the deck off properly. Once again, cheers and all the best to you pal.

thanks !!!!, I own this turntable, i bought it when i was very young, it worked fine but the arm did not return, after looking your video i understood the problem, so i removed the spindle and gear, after good cleaning it from oil, i glued the cracked gear on the spindle, changed the RCA cable with high-end ones, turntable works like new, a drop of oil on the motor axel lowers motor noise, (when not in use for long time its good to remove the belt from the motor)

Thanks for sharing; great to keep these old units working

Congratulations finally a clear and complete video. I have two Technics SL D21 turntables that I haven't used in a long time and now they don't start. I'll try to follow your advice and if I can't get them started I'll have to bother you. Thank you

Thanks for this video, really comprehensive. I was able to refurb my SL-B2 with this and it's like new again.

Waouh, thank you so much for that video ! Just found my mom's old turntable while cleaning the attics. The belt is gone so I will replace it, as well as the center spindle cork, but I am happy that it seems to be working juste fine otherwise ! I will follow the steps you gave in order to restore it ! Cheers !

@AdamHiFi

3 жыл бұрын

awesome, so glad to hear. thanks a lot for watching, if u run into any problems feel free to let me know

Thank you! Just ordered that oil.

@AdamHiFi

3 жыл бұрын

great - that stuff lasts a while so it's a decent price imo

Great video! I actually have a Technics SL-B1 which is from the 70s I think. It's very similar to the B2 apparently. In fact, I'm not exactly sure what changes were made from the B1 to the B2. I've had it for about 15 years and bought it used on eBay. It plays ok but certainly needs some TLC. I look forward to spending some time with this video to help me sort my table out.

@AdamHiFi

3 жыл бұрын

Good luck! thanks a lot for watching

Thanks for this type of videos Adam, they are very useful, can you could put the links for the belt and other accessories, it seems that they no longer work, thanks

@AdamHiFi

3 жыл бұрын

Thank so much for the kind words. I just updated the links to a more general eBay search due to the constant changes of listings! good luck

I recommend non linting swabs especially for more sensitive units. Its on amazon.

ive just brought one & im adding a autofon concorde cartridge with the club stylus its the best one they make.i just see a video & he said set it to recommended weight which is 3 to 4 grams i think & he said set the skating the same.so i just wanted to check is that is right.also mine looks like it drops well below the line of the record so i might have to lift it a bit.but thank you for your video now i know how to lift it & clean & service it so a big thumbs up from me peace...

@djbigleg3228

3 жыл бұрын

yeah i just tried to set it up but the pitch control dont work at all not sure if the belt is even on it.its playing both speeds really fast so i need to work out how to get to the pitch control & get some deoxide on it or its going back lol.quality video though.but i tried to change the height a little & it turned both ways but just pinged back to where it was.so i couldnt adjust it it just drops back down when i lift it peace...

Great video Adam I just got one of these today for $30 new stylus and belt. Just needed cleaning and I broke one of the hinges when putting it in the back of y car. I am gutted. It cleaned up nicely. Not sure what to do about the hinge. Seems like this is a problem for a lot of dust covers. Thanks again

Here's my turntable here's my turntable

Great video. I cleaned the ol’ girl out. I’ve ordered a shaft gear. My dust covered is trash, I’m going to go to a local glass shop who made one for a friend for $65. Here’s a question: the arm doesn’t auto return AND I’ve adjusted both ways unsuccessfully for the needle going to far inside and getting on the paper. Any advise?

Hello Adam. Do you know if the Technics SL B210 uses the same type of gear?

Just got a b2. Thanks for showing this. How do you oil the motor? Or do you?

@AdamHiFi

3 жыл бұрын

nice! at 10:20 i motor the spindle, basically all this one needed. some motors you can lubricate but not always necessary

Hi Adam, I cannot find an SL-B2 Spindle on ebay. however i have found an SL-D3 and an SL-23 spindle, do you know if either of these will be a compatible replacement for the SL-B2? I cant seem to find any information on it.

I have the MCS version of this same table and I'm running into a MAJOR pitch jumping issue. I have watched a few vids using Deoxit5 and said you can shoot it into the top area above or below the wheel. Would it be best to go in from the bottom and apply the spray that way?? Any advice would be great on this pitch wheel. Nothing beats these old tables and a little maintenance surely will add many years of life to them. Great vid If anyone has any advice on the pitch wheel please respond Thanks

my SL-B350 is freezing up after a song or two, any ideas what it might be? I had a tech look at it

What is the mechanism that the stop button triggers? I am having an issue with my unit, the stop button is not working.

Great video! I’m working on my sl-b3 and all is functioning as it should, but the tonearm seems to be a little stiff as does the queuing lever. So if I bring the arm up and bring it back down it’s not in the same spot. Any thoughts?

@AdamHiFi

3 жыл бұрын

hmm-could be the anti skate, also how high does the arm lift up when you engage the lever?

@philmclaughlin8661

3 жыл бұрын

@@AdamHiFi I think that could be part of the issue. I just discovered that the arm isn’t going all the way to the spindle so I’ll need to adjust that. That’s probably the bigger issue.

@surferdargile

3 жыл бұрын

Hell o I'm trying to fix the "auto return" mechanism and play button of my sl b3 .... It doesn't come back a t the end of the record, nor does the play button go down to "released" position.. the turntable works good, but by manually placing the lever on the record.. Would you have any hint ?? thanks a lot

Hello, Thank you for posting this great video. I would like to make these repairs to my own turntable but found that the eBay store you’ve recommended is now sold out. Can you recommend another supplier for these parts? Please respond. Thank you!

hello, as you know the Technics SL D 21 turntable is driven by a magnet but I can't get it started: do you have any suggestions for me? Thank you

@tomherold4774

2 жыл бұрын

I have the same issue I think

Adam luv the video , I have a technics sl-b3 turntable and it needs a new spindle gear . do you know where I can get one .

@AdamHiFi

2 жыл бұрын

Thanks for the comment! Link for the gear is in the description

Adam i hope you see my question or someone else here. I have a b2 i fixing up for my lil brother for Christas. When i plug a preamp into the turntable it has extreme noise. Its not audible straight plugged in but beither is the audio really. Should i do an internal ground on the negative?

@AdamHiFi

2 жыл бұрын

Couple things 1, does this happen when you try this preamp with other turntables? 2, make sure the headhsell is wired properly (Google “turntable cartridge wiring diagram”) 3, check the RCA polarity from the tonearm to the cables, be sure top left is left channel positive, etc. 4, double check ground cable is wired properly, do not internally ground. 5, double check the cartridge does not buzz by using it on another turntable

Great Video! I was given my fathers old Technics SL-B20, similar to the one in your video. When I plug it in it starts spinning and won't stop even when I push the stop button. Auto return and cueing work but I have to unplug it to stop. Do you have any idea what could be causing this? Thanks in advance!

@AdamHiFi

3 жыл бұрын

Hi, the inner mechanism is more than likely all seized up due to dry lubricant. Try using alcohol to remove all the old goop and re-lube. You might have to partially disassemble some mechanical parts to remove all of the old gunk. Good luck!

@johnorfanopoulos1245

3 жыл бұрын

@@AdamHiFi Thanks! Opening it up today

REGARDS FROM DOMINICAN REPUBLIC. I HAVE A TECHNICS LS-B3. WHEN THE ARM FALLS WELL THEN THE RETURN DOES IT BEFORE TIME ON THE LAST TRACK, WHEN THE RETURN WORKS WELL THE ARM FALLS FORWARD, IT GOES TO THE SECOND OR THIRD TRACK, PLEASE HELP ME WITH THAT PROBLEM. THANK YOU.

Great video! My parents gifted me this turntable and I was hoping there would be a video on how to refurbish it, so thanks! The pitch adjust seems to fluctuate on its own. I’ll set it and it goes out of pitch. How would I fix that?

@AdamHiFi

3 жыл бұрын

awesome! and try some deoxit on the inside pitch adjustment mechanism and be sure the plinth is lubricated thoroughly

@AdamHiFi

3 жыл бұрын

21:50

@brianshaw9326

3 жыл бұрын

Do I need the Deoxit gold? The cheapest stuff I’m finding is like $20. Seems like a lot for a small one-time use. There’s this one for $8? DeoxIT gold Mini-Brush Applicator, 100% Contact Conditioner, 1.6mL - G100L-16BX www.amazon.com/dp/B00XICZILS/ref=cm_sw_r_cp_api_glc_fabc_VCjbGbKJYEWNM

@climbingkevin

3 жыл бұрын

@@brianshaw9326 I'm wondering the same. What did you end up getting?

@brianshaw9326

3 жыл бұрын

@@climbingkevin I actually didn’t end up buying it yet...found out I have a wiring issue as well, so I’m trying to fix that before buying the oil.

What are the specific replacements brands and models?

@AdamHiFi

2 жыл бұрын

Any brand of a standard headshell will fit just fine. Same with the cartridge (needle). As long as you set the proper tracking force and anti-skate everything will work great. Examples of standard cartridges are the Ortofon 2m Red, Grado Prestige, Shure M95, etc. NOT what's called "p-mount" cartridges. As long as you use a standard headshell (check below) you will be fine. Example of standard size headshell (there are hundreds): www.amazon.com/Parts-Express-Headshell-Plated-Contacts/dp/B00HEFBJF4/ref=sr_1_5?dchild=1&keywords=headshell&qid=1633356579&sr=8-5 Example of standard cartridge (there are thousands): www.amazon.com/Audio-Technica-AT-VM95C-Moving-Turntable-Cartridge/dp/B07JL2RTBX/ref=sr_1_4?dchild=1&keywords=turntable+cartridge&qid=1633356646&sr=8-4

What do you suggest for cleaning the springs? I'd like to clean the spring for the tonearm lift. Mine is gooey and raises slow.

@AdamHiFi

3 жыл бұрын

For cleaning a spring some alcohol and a cotton swab is fine

@GabeSerrano

3 жыл бұрын

@@AdamHiFi Do I add grease back after? If so, which one? White Lithium or Hoppes 9?

@AdamHiFi

3 жыл бұрын

@@GabeSerrano for a spring? or the tonearm lift assembly?

@GabeSerrano

3 жыл бұрын

@@AdamHiFi for the spring. I cleaned gunk off of it. Should I put grease on it after?

@AdamHiFi

3 жыл бұрын

You can just apply a bit of white lithium grease for springs. Some people don’t, I do. Tonearm lift assembly I use the Hoppes for the B2 generally

So, if when you turn it on it has a kind of grinding sound, would that just be needing to lube the motor bearing?

@AdamHiFi

3 жыл бұрын

where is the grinding coming from?

@2010stoof

3 жыл бұрын

@@AdamHiFi honestly I haven't seen the table in person. My dad just told me he was going to throw it out and said it's making grinding noise. That cog you mentioned makes sense. I ordered a belt in can it's a simple fix. I have triflow grease I'll be using. Another guy mentioned to put thin oil into motor shafter bearing Sorry I don't have more info yet. But I hate to settle these old tables go in the garbage.

I was told my cam wasnbrokennthays why my auto return doesn't work ,what part am I looking to replace?

@AdamHiFi

3 жыл бұрын

cam is or is not broken?

@climbingkevin

3 жыл бұрын

@@AdamHiFi I think he's saying IS broken. Like mine, but I too can't find the part on eBay. Happen to have a link? Really appreciate this video!

Have you ever experienced a situation where a semi automatic’s auto return mechanism activates too early? That is when you move the tone arm over, it instantly returns after the platter spins a bit? I have a semi automatic that does that…

@AdamHiFi

3 жыл бұрын

Yes! Simply find the adjustment screw usually located near the tonearm base. Find it in the turntables manual. You usually have to insert a long screw driver in and move a screw clockwise for the tone arm lifting up sooner or counter clockwise lift up later.

@matt.pma.kresnaputra5458

3 жыл бұрын

@@AdamHiFi thanks for the reply man but my table doesnt seem to have it (and no manual either). It seems that the teeth under the platter connects to the gears instantly once it starts spinning

@matt.pma.kresnaputra5458

3 жыл бұрын

@@AdamHiFi i ended up just removing the entire auto return mechanism lol

If speed is faster than 33 for voice how do you adjust

@AdamHiFi

3 жыл бұрын

use the pitch control adjustment, spin it left or right and check the strobe light.

Does anyone know where to find a replacement dust cover?

@AdamHiFi

2 жыл бұрын

They’re for sale on eBay but are very expensive. You also have to make sure you find hinges as well which are always sold separately

@garyamericant3143

2 жыл бұрын

I wonder if anyone has tried the dust cover fix. You basically cut out the plastic and it bolts on to the dust cover. A metal tab slides into the original hinges.

@AdamHiFi

2 жыл бұрын

@@garyamericant3143 kzread.info/dash/bejne/pHudsqWtmMm5krQ.html

That platter stops very abruptly,That would point to the t/table belt being too tight.I noticed you had to stretch it rather a lot to put it on.Liking the B+W tho'.

What type of screwdriver did you use to remove the spindle ,u didnt say

@romeomoore9655

3 жыл бұрын

I'm having a really hard time getting it off!

@AdamHiFi

3 жыл бұрын

@@romeomoore9655 it was a standard philips. but they glue it down, make sure you don’t strip it!!

I can't find the gear on ebay. What should I search for?

@AdamHiFi

3 жыл бұрын

i purchased mine under the title "Technics SL-B2 SL-B3 Spindle Gear Auto Return Repair" you can see it under sold listings. hopefully more will pop up soon, cant find any either.

@2010stoof

3 жыл бұрын

@@AdamHiFi will that fit the sl-b202? I have the service manual with part numbers but I have yet to see any parts listed with part numbers You'd think many of these lower tier for the time tables using same parts for cost savings.

Which one is overall better, this one or the SL D3?

@AdamHiFi

3 жыл бұрын

The d3 has more features so in turn is harder to service. Just has more going on. I prefer the b2 due to its utter simplicity and extreme reliability. However, there is a ton of parts readily available for both online, they’re very similar turntables. One is just simpler than the other. This is a great resource in comparing all technics models: vintagetechnics.audio/turntables.php

@michalistzavellas5505

3 жыл бұрын

@@AdamHiFi Thanks a lot! My question however regarded mostly the aspect of sound quality, because I am going to buy onlt one of them

@AdamHiFi

3 жыл бұрын

@@michalistzavellas5505 Gotcha, then the d3 will definitely be the way to go. Better specs BUT a bit more difficult to service. Definitely not hard just more parts than the b2. d3 wow/flutter - 0.03 d2 wow/flutter - 0.045 d3 rumble - negative 75 d2 rumble - negative 70 d3 has more features as well. Good luck Adam

@michalistzavellas5505

3 жыл бұрын

@@AdamHiFi you are the best, thanks a lot!

Where can I purchase cam gear

@AdamHiFi

3 жыл бұрын

the link in the description has the exact gear i used. it's quite expensive but it works and is stronger than the original. good luck!

@rajoconnor

3 жыл бұрын

Link isn’t finding the cam. Any other choices out there?

hello do you repair in LA? I feel like I want to do it on my own but super scared too since I’m noob I have technics mk2 that I haven’t repaired in like 5 years :S

Hey. Can you repair my technics so-1300 mkii? It plays but can not automatically function work. If you not a repair. Can you tell who's is a good repairman? Thank you

@AdamHiFi

3 жыл бұрын

What doesn’t work? It won’t return after the record is finished? Have you tried to place the tonearm far into the label and see if it returns? If so, just adjust the return point screw located under the tonearm

@HaiTran-eb3ce

3 жыл бұрын

@@AdamHiFi I mean automatic not working. I replace aftermarket cue gear. But still not working right. The tonearm lifts. But can’t go down to play.

@AdamHiFi

3 жыл бұрын

@@HaiTran-eb3ce Hmm. Things might be sticking, old grease needs to be removed and replaced. most of the assembly will need to be disassembled in order to remove everything properly

@HaiTran-eb3ce

3 жыл бұрын

@@AdamHiFi I give it to the professional but he changes the Cue gear out ( 3D print) then he moved out of town so don't have time to finish it. Manual play find. But automatic not working.

If anyone is looking for 3D-models to print the broken spindel, here is mine. drive.google.com/drive/folders/1TDWynr-brlTvn_43h5P2S78_HL17QlzU?usp=sharing Also have the disk size selector, as that was also broken on mine.

Technics SL-B2 , high end? That's a good one! :))))))

@AdamHiFi

3 жыл бұрын

High end compared to similarly priced turntables of today. Specs better than most turntables that cost the same amount of money. High end compared to a VPI? Obviously not... lol. But compared to a Rega? Yes. More features, better specs, etc.

@Marian1983.2D

3 жыл бұрын

@@AdamHiFi Rega is not high end either. I bet that (let's say) a Dual 1019, will be here playin' long after that plastick crap Technics is dead! :))))

@topsecret3806

Жыл бұрын

@@Marian1983.2D dual 1019 high end, hahaha also known as the fishbox, thats a good joke

@Marian1983.2D

Жыл бұрын

@@topsecret3806 Are you an idiot?🤔

@topsecret3806

Жыл бұрын

@@Marian1983.2D because you own a dual its the best you idiot, tell us about your butt plug 😆😅🤣we know its the best

My technics SL B3 turntable won't shut off or auto return

@AdamHiFi

2 жыл бұрын

Most likely the center spindle gear cog is cracked or missing

EL MOTOR TRATA DE ARRANCAR Y NO LO HACE SL-B2

My technics SL B3 turntable won't shut off or auto return