God knows how many times you've helped me with your videos......thank you so much!

Thank you very much. I have wasted many hours trying look this stuff up. Now it is in my favs so I can always watch it again 😎👍

@RazorRC

5 жыл бұрын

Glad it's useful!

Awesome info!! This is why I like your channel. You have so much racing info 👍👍

@RazorRC

5 жыл бұрын

Thanks! Seems like people like the more technical videos, so I'll be doing more in the future.

Thank you for this. I'm hitting that like. Already subbed.

What a nice review my friend~!!^^👍👍

Good info brother!

Be careful using the measurement from the rear face to the hex mounting surface as that is backspacing, not offset. Offset refers to the distance from the centerline of the wheel to the hex mounting surface; a measurement that is based on knowing the exact width of the wheel and where the hex mounting surface is located relative to that. It's easy to mix the two up but they are not interchangeable.

@RazorRC

5 жыл бұрын

Good point, and I should've been more careful with the term. In the beginning I briefly mention what 0-offset actually means, but unfortunately Proline went and redefined the term and confused the rest of the world. Good point about backspacing, thanks, didn't know there was a term for that so I just called it "the measurement from the inner lip to the mounting surface".

Great video!! Now i have the know how!!

Good info bro

This video is good info for wheels

Great vid. I'm building 3 SCT's to race at our new track and have been buying bulk lots of random wheels off eBay, its been a challenge trying to figure out what fits what...It will be much easier now, Thanks!

Cool video great info.. so is a 2wd slash the only sct that uses a different front wheel? Thanks

Thank you!!!

Still looking for a video of how these go together. No luck here

Good to know bud thx

The Offset is where the hub meets the outside of the rim. Not the width. 0 offset means the hub sits flush with the edge of the rim. The less the offset, the narrower the profile will be. 3mm offset will sit a total of 6 mm wider than 0 offset to the outer edge of the tire.

@RazorRC

3 жыл бұрын

That's actually backspacing. Proline calls it offset, but it's the wrong term. www.discounttiredirect.com/learn/offset-backspace

Thanks for the vid but I can't find much info on the HPI jumpshot sc v2. Would you know the offset and is it the same for front and rear?

could you do one for 1/10 buggy wheels??

Hello, i know the video was made a long time ago , but .. any recomendation for a 17mm senton? Wana have road/dirt track tires

What size tire goes on these wheels?

Will tlr d216 wheels fit a team associated b6.1? Please help I'm a rookie and saw a good deal on raw speed d216 but I have a b6.1. Thanks!

I just bought a Tekno SCT410.3. I have a bunch of Traxxas 4x4 offset wheels and tires. Is it okay to use those on my Tekno?

Are short course trucks still popular to race?

what are the name of the ones that fit slash

I can’t find proper specs for the Redcat 1/10 sc. any help would be appreciated.

And now we have drag wheels in the sct wheel category. What are those offsets?

The green ones are gangsta

What is kyosho sc6 offset

Make another video please ---. Why would you use each wheel? What about the tread patterns?

so what wheels and tires can I use on my losi tenacityy tt pro?

@ramtrucks721

3 жыл бұрын

0 offset. Anything else and it will be extra wide

Which offset will fit the ARRMA Senton 3s BLX?

@Overland_RC

3 жыл бұрын

I'm pretty sure it's about 3.9mm offset

What happens if I put any of these on my rustler?

i just bought 8 old new nos imex samurai aka vrx blast riverside hobby i think look the same aluminum frame n such 4x4 non solid rear axel unit

I was looking for an explanation WHY there offset end of sentence? why not have all 4 equal whats the purpose of offsetting in the first place ? if they'd install equal A-Arms all wheels would be perfect no?

@RazorRC

4 жыл бұрын

The Traxxas Slash 2WD is the only truck that doesn't use the same offset on all 4 wheels.

@ConditionZero76

4 жыл бұрын

@@RazorRC The slash 2wd has an offset correct? if so Im asking why whats the offset for? is it help with over steer or something? Im confused, I noticed RPM sells specific A-Arms for the 2wd slash to compensate the offset so you can use all 4 matching wheels?

@RazorRC

4 жыл бұрын

HKGuy Snowman#1 every Traxxas 2wd has narrower front arms compared to the back arms. Rustler, Bandit, Stampede, Slash. Why? ‘Cause they suck.

Offset: definition?

And of course there is the Senton 3s, which is marked as 3.9mm..

@RazorRC

5 жыл бұрын

I didn't cover any of the other hex sizes, only 12mm. Senton 3S is 14mm, Senton 6S is 17mm, and there are other weird sizes like the Durango which uses 15mm and I think there are some 13mm trucks. ☹️

@Atown804

5 жыл бұрын

Wheels and tires do you recommend for the Senton 6s?

What I don't get about sc wheels Is the inside is miles bigger than the outside.

@justinbarber8332

5 жыл бұрын

It was originally for knuckle clearance on the Traxxas Slayer which used a much larger knuckle from the Revo. Using a 2.2 outer diameter retains the scale look and the 3.0 inner diameter accommodates the large hubs.

@LawrenceTimme

5 жыл бұрын

@@justinbarber8332 interesting. To me it always looks silly and not scale at all.really puts me off them tbh

Nevermind lol

Good info, but your thumb nails wtf?

OH MY FUCKING GOD, I HATE GOOGLE'S USELESS SEARCH SYSTEM! I don't GODDAMN care what the offsets are. WHY ARE SCT WHEELS SO STUPID WITH THE FAKE 2.2 THING AND THE 3.0 BARREL DIAMETER!?

The word “basically’’ ruins your entire channel

Not a single Arrma mention. Were there no Sentons made 5 years ago? I guess that might explain it, hehe.