Filmad och redigerad av Daniel Josefsson. Vi river isär en Yamaha V6 3,3L för att felsöka varför 2:a cylindern har 0,0 i komp!
Жүктеу.....
Пікірлер: 13
@krigslida83464 жыл бұрын
Briljant!!!
@Mechanimations4 жыл бұрын
Great video work!
4 жыл бұрын
Thanks! 🙌
@clemdoggmillionaire99142 жыл бұрын
Solid editing! ...
@rekordronny4 жыл бұрын
Den där får ni aldrig ihop igen! ;-) Hur lång tid tog det i verkligheten?
@The.Norwegian Жыл бұрын
I've worked on these outboards for over a decade, and i can already tell that the work you did cost more than the engine was worth. Disassembling, assembling, mounting the engine back on the boat, putting the boat in the water and test driving it takes at least 30 hours, and then there's the price of all the seals and bearings etc. It's better for the custumer to sell the engine in parts at this point, sadly. The lower unit, powertrim unit, cowlings etc. are worth a lot.
@th3smurf692
11 ай бұрын
This is probably a 150 hp or 200p hp engine they cost upwards of 20k new and used depending on how many hours it ran. It can still bring decent money
@ericvaughn87413 жыл бұрын
why would before let the connected rod drag against the cylinder wall and possibly drop the piston on the ground
@antoniocarlos77 Жыл бұрын
Opa fala meu diretor aonde consigo um sacar desse .
@Jackson-nm7yb2 жыл бұрын
How many hours this engine got?
@clemdoggmillionaire99142 жыл бұрын
Oh and I almost forgot about the camera guy filming
@clemdoggmillionaire99142 жыл бұрын
That being said, you guys need to stop helping one another turning in the same light bulb. I think I saw three people circling around it at one point. Must be nice
Пікірлер: 13
Briljant!!!
Great video work!
4 жыл бұрын
Thanks! 🙌
Solid editing! ...
Den där får ni aldrig ihop igen! ;-) Hur lång tid tog det i verkligheten?
I've worked on these outboards for over a decade, and i can already tell that the work you did cost more than the engine was worth. Disassembling, assembling, mounting the engine back on the boat, putting the boat in the water and test driving it takes at least 30 hours, and then there's the price of all the seals and bearings etc. It's better for the custumer to sell the engine in parts at this point, sadly. The lower unit, powertrim unit, cowlings etc. are worth a lot.
@th3smurf692
11 ай бұрын
This is probably a 150 hp or 200p hp engine they cost upwards of 20k new and used depending on how many hours it ran. It can still bring decent money
why would before let the connected rod drag against the cylinder wall and possibly drop the piston on the ground
Opa fala meu diretor aonde consigo um sacar desse .
How many hours this engine got?
Oh and I almost forgot about the camera guy filming
That being said, you guys need to stop helping one another turning in the same light bulb. I think I saw three people circling around it at one point. Must be nice
ID👌👌👌👌💖💖💖💖👍👍👍👍🤔🤔👆👆👆