Quick cinematography tipp: use fixed focus when you have it set on the table, it kept focusing on your hand. Also having the board a little bigger in view would be great.

Ultrasonic welder is no match for subsonic hammer

@ChargerLAB

2 жыл бұрын

hammer is always No.1😂

Великолепный разбор. Спасибо большое. Продали мне зарядку, под видом оригинала. Внутри для тяжести положили два балансировочных груза от автомобильных колёс по 5 грамм. На входе не терморезистор, а обычный резистор. Дальше схему описывать нет смысла - китайская подделка. Восстановлю, конечно, заряжала вроде бы нормально.

You know what would be neat a list of the best chargers for different devices: Phones, tablets, laptops, etc. Maybe nothing too crazy but a top 5 or 10 list for the major devices. I know there are lists like that for computer desktop PSUs. I have been unable to find anything like that for chargers.

@hiddenguy67

Жыл бұрын

get an anker

Love the channel dude! I picked up a few of the USB testers. I'm an EE and really appreciate your attention to detail and the BOM listing you have in your description section of the videos. Keep up the great work!

@ChargerLAB

2 жыл бұрын

Glad you like them!

@florind.5711

2 жыл бұрын

Maybe you can tell us the rated temperature for the main filter caps. Thanks

@Robbyjonesy

2 жыл бұрын

@@florind.5711 maybe you can tell me if i can use this to charge my iphone SE 2022! :D thanks in advance.

Would you recommend this charger in terms of build quality? Or should i look at the anker 25w charger?

I didn't know a channel dedicated to chargers existed 😂😂 smashed the sub button

@atikaahmed5252

4 ай бұрын

Just like he did to the charger

Could u also do a disessambly of the fake one ive got scammed and baught one and dont feel like forking another 40$ on the original(baught the fake thinking its legit) It output 25w of charge and can charge the phone from 0-100 in around 50min. I just want to know if its decent quality that wont affect my battery health if not guess im getting the official one now i know how to spot a fake one

@ChargerLAB

2 жыл бұрын

Good idea. We'll consider that.

I have only just discovered your channel and I (as an EE) am highly impressed. Thank you for your videos!

@ChargerLAB

Жыл бұрын

Glad you like them!

Would love to see Li-ion battery chargers as well. Great reviews, thanks.

due to chip shortages and prices rising can you do a video (20mins) on how to Safely recover working chips for other uses (recovered from laptops, chargers, led tv boards, hard drive enclosures) and their uses.

@florind.5711

2 жыл бұрын

Caps are subjected to near the limit sometimes operating temperature in psu s You may look at the discoloration of the pcb or it gets darker in areas of high temperatures. Avoid taking caps from there Use soldering Station for removing parts Personally, I tried using removed mosfets, they looked fine, but blew apart when reusing. Today you can hardly reuse something unless it s new or almost new. Try opening an led bulb after 6 months of burning...look at athe board, you can see the brown area from heat.... Have fun Sincerely, Florin D.

Thank you very much 🥰🥰 Can i have a look inside samsung type c to type c cable 🤗

@ChargerLAB

Жыл бұрын

Sure, here is the teardown video of Samsung 100W USB-C Cable. 🔗kzread.info/dash/bejne/Z458qMGgaJuooaw.html

there's another 25 W available named Pd. Which one to choose? I'm confused.

I suppose SAMSUNG uses proprietary charging tech - Can one use VOOC chargers of Realme oR POCO X3 Pro's chargers instead ? the concern is it should not spoil the battery of say A35/M35 that supports 25W super fast charging ?

Can you make a video for best GaN charger as of today thank you so much

Can you please give the picture of the circuit boad. I have a samsung 25 watt charger but I can not read the value of resistance as it is burned.

Which one do you prefer for better battery drain time and lifespan for s22+ , Anker powerport III 25w or this one ? Almost same price. I don't care how they are fast, for me durability and batter lifespans are important.

hello, I have a similar charger that came with my galaxy m51, it's also usbc. the charger started not working and depending on how I mess with the USB port it charges, I assume is a problem with the usbc connector, how would one replace or fix this connector?

Can you tear down the Steam Deck charger when it gets released?

@ChargerLAB

2 жыл бұрын

Possibly. But we have to wait until it's released.

I eccedently disconnected the usb type c cable from the charger with a strong force will I damage the charger

I hope the channel will have more reviews about electric, ex: Ripple noise

@florind.5711

2 жыл бұрын

Original chargers/ psu's are ok regarding inrush curent and ripple, Samsung has hid distinct low profile ferrite transformers. Go for the original ones, now i have in front on my desk this model în video, and the design is different and small spark gap. Also no glue/ resin on back of pcb.

i have anker nano iii 20w charger, for samsung S21, should i buy this one? or the nano port iii 20 w is good enough?

@Bamabrute85

Жыл бұрын

Only buy a charger that has the PPS feature. Without PPS, on a Samsung phone, you'll only get 15 watt charging.

@SuperMan19867

Жыл бұрын

i have s21 also, and USB checker with the 25watt samsung i bought separately charger it charges only 20watt at max anyway :(, so take what cheaper for you (it stll faster by about 10% faster then 15W version

@streakurt

Жыл бұрын

I was considering same question whic is better this one or anker ace 25w as component quality and for batter lifespan ? I don't care much tinny charging time differences.

So this is actually a 30w charger under PPS mode? 11v 2.75a

@ChargerLAB

2 жыл бұрын

It's should be 2.25A. Sorry about the mistake.

so transformer input (power from wall) 110v or 220v. what is the output? I mean what voltage supplies actual pcb? im not nerd in this, but could i connect that charger on battery? i want to make sort of powerbank with super-fast charging for my samsung as i can't find one to buy

Is this Samsung USB-C 25W charger compatible with Xiaomi redmi 10 note 5G?

You haven't made a video on the 30-pin charging cable used for iPhone 4.

@ChargerLAB

2 жыл бұрын

ha ha, that's too old.

My one stoped working after 2months

How to fix adapter not workimg anymore

which charger would you personally opt for in a phone/tablet/powerbank charger use case?

@florind.5711

2 жыл бұрын

original one, and for powerbank, my choice is 25w 10000mAh Samsung powerbank(the simple one, without wireless charging)

You're killing me Smalls! A few things here 1 you're the only video I'm coming across to explain the internals 2 The 25w is considered a Super Fast Charger, not fast charger (kind of a big difference 3 There's a part that seems to burnout that drops it from Super Fast Charging to Fast Charging (I'm sure there's more than just me that wants to know why) 4 Why didn't you show what's holding that plate in?! Is it one way clips, apoxy, sealed some other way?! Please, if you repost a video on this, I hope I come across it coz there's a few chargers I'd like to fix

@ChargerLAB

Жыл бұрын

Thanks for your advice.

Whats happens when this charger stop working? Maybe some capacitor fail? Mine stopped working suddenly

my t800 doesn't output any power but data voltages are normal and phone shows super charging mode or i can switch to normal 5v charging, and there is no error from the phone even with normal 1h charging time 😢 i haven't another C to C cable to test and i hope the adapter wasn't the issue 😢 response me if you have any suggestions ❤

I wonder how different the fake ones look like for this model. They are rampant

I had this charger along with Galaxy A71 (2020). Now I'm using it with Galaxy S20 FE 5G. One day, it had problems, it charges very slowly, 1 percent per 5 minutes. My observation: if it's charging normally, there's a consistent buzzing inside. But when it doesn't charge normally (starts to charge slowly), the buzzing fluctuates. The (temporary) solution was to unplug the charger then plug it again every 2 minutes. Super Fast charging is enabled, nothing is wrong with the phone. What do you think the problem of this charger? I need help, do you think it can still be repaired?

@ChargerLAB

Жыл бұрын

Sorry we can't judge the problem from the outside. We'll recommend you to buy a new one, cause the charger is pretty hard to be fixed.

@freshbakedclips4659

Жыл бұрын

@@ChargerLAB oh, I see. Thank you for the quick response.

QC4, nice. Could not find that from Samsung.

@florind.5711

2 жыл бұрын

Samsung 25W uses PPS/PD protocol

may I ask u a question about samsung charger

Do you have comparison video of Apple 20w and Samsung 25W charger teardown ? which one is better ?

@vhongrealOfficial

Ай бұрын

Apple 20w is the best for iphone

Is this gan charger ? If not is ugreen a good brand ? Im planning on buying the dual port 45 watts one since its similar priced to this and that one is gan charger and dual port too .

@ChargerLAB

Жыл бұрын

The Samsung 25W is not a GaN charger. If you have multiple devices need to be charged at the same time. I would recommend you to buy a dual/multiple port charger. And also, UGREEN is a well-known brand, we took apart lots of products of this brad.

@jurajbacak9877

5 ай бұрын

Samsung USB-C 45W charger has GaN technology?

Hello, can you maybe give me values of 2 smd capacitors on top side next to 400v capacitor

@uroscekov5559

9 ай бұрын

C13, c14 mark on board

Ya no da carga que probablemente podría ser ayuda porfa

it look this link can,t open

Hi I wanna bypass the 230V part and use my little solar pannel that makes approx. 5V on the low voltage side on my EP-TA10XXX Rev. 1.1 Dongynang E&P. Any idea how to find info on that or simply how to accomplish that? Kind regards Mike

@googlacco

6 ай бұрын

solar panel is direct current, you do not need rectifier all you need is voltage regulator and power delivery module no do teardown but buy component direct, is cheap

What year is this charger out?

Could someone recommend a good 12 volt type c car charger for a Galaxy S10+ ? My current charger barely keeps the battery level maintained let alone charged. If I drive an hour I may get 3% on the battery charge.

@florind.5711

2 жыл бұрын

I have had only one qc3 car charger...generic brand, but reliable. Go for samsung, anker etc...

can i use this (Samsung 25w charger) for charging my iphone SE 2022?

@ChargerLAB

2 жыл бұрын

Yes, of course.

Nice detailed video - I stumbled on it looking for an explanation as to why this charger is recognized as a super-fast charger by samsung devices but others such as INIU's 25w PD 3.0 fast charging mini wall charger is not - despite it being PD rated as well as all the other specs appearing to be equal. Do you have any thoughts on why this is? What makes the Samsung 25w "special" that it is properly recognized? side note - the phones report the exact same estimated charge time regardless of which of these chargers i use - also interesting that the INIU is recognized as a "Fast Charger" just not a "Super-Fast Charger" - what defines "Super" to the mobile's charging system? Thx!

@ChargerLAB

Жыл бұрын

It depends on the PPS protocol that INIU's 25w can support. The Samsung Super-Fast Charging is actually the PPS protocol.

@iam2loki4u

Жыл бұрын

@ChargerLAB I find it odd that a galaxy 20FE does recognize the INIU as super fast but my fold4 doesn't... Thanks for your response!

Looks good 😃

I have galaxy note 20 ultra and there is liquid coming out from my charging adapter should i use the same charger or change it with new one? Plz tell me i don't wanna damage my phone.

@ChargerLAB

2 жыл бұрын

Please buy a new one.

@seerajsanghar4404

2 жыл бұрын

@@ChargerLAB thanks really appreciated

Thank you so much ❤

please teardown baseus/ugreen 25w 🙏

I just dropped this charger on the ground.. Silly question, but do you think anything will break on the inside?

@ChargerLAB

2 жыл бұрын

charger is tougher than you thought.

@jimjim7008

Жыл бұрын

Why would you ask the question of your charger still works?

When I slightly shake my charger, I can hear sometning dangling inside, like a cushioned rubber shape (the dangling sound is somehat muffled). I thought the PCB might have some free room inside the case, but I saw in your video that it has grooved holders and glue, which shouldn't allow it to dangle. Is this normal?

@ChargerLAB

2 жыл бұрын

Not all charger will filled with silicone adhesives. So, it is normal.

@VolfMark

2 жыл бұрын

@@ChargerLAB , thank you for the reply. The charger is new and works normally, but I was worried something may have come loose inside. Thanks for the input. 🍻

Thank you ❤

Please tear down Powerology 156W charger

i dont know why , but my S21 draw only 20watt of the 25w (from 1-20%) then it become 16watt after 20%

@ChargerLAB

Жыл бұрын

The 25W only means the peak power, the power will gradually decreased during the charging.

Dear, please make a video for fake Samsung 25w ( Chinese) vs Original Samsung 25w charger and what inside in fake Samsung 25w charger so the people understand difference between original and fake. Thanks

I need this charging 25w female type c on board connector

@ChargerLAB

Жыл бұрын

We do not know this as well.

Works great

Does it support QC 3.0 for my htc u11?

@ChargerLAB

2 жыл бұрын

It can support QC4 and cannot support QC3.0. Only the QC4+ can be compatible with QC3.0.

@ricstars95

2 жыл бұрын

@@ChargerLAB if it cannot support my phone with QC 3.0, what would be its max charging wattage then?

The fact that Samsung doesn't use folding plugs for these (in regions that use type A plugs) really annoys me.

@jimjim7008

Жыл бұрын

Get a life and stop crying like baby 🍼

Teardown samsung 25 watt uk pin (3pin)

good luck sir

CapXon eww

What a garbage caps samsung is putting into this chargers smh...No wonder why apple chargers cost a lot more than this one, cause they have nippon/nichicon inside or rubycon, not this capxon garbage, the worst caps ever.

Cheap components. I dont like 😪

@florind.5711

2 жыл бұрын

not really And CapXon was used în reputable PC Psus. Transformer is low profile And output cap is low esr. Good configuration for nowadays