Never get tired of the raw honesty in your videos. Keep it up!!

I'll have to say Andy, this is probably my favorite video you've done(and i watch them all). Showing maintenance issues and how to fix it helps tremendously for us do-it-yourselfers! Owning a boat is very expensive and again, it helps tremendously. Thank you for your compassion and love for the youth and military also. Hope you and your family have a safe and wonderful Chistmas and a Happy New Year!!! ❤😊

Well after watching your message here. I checked the four bolts attaching the motor to the jack plate on my 20xp with 36 hrs. It is amazing how loose those bolts were!! Scary!

Think we need some new blast from the past videos! The under/over are awesome as well, but let's be real, MOST ppl can't afford to even think about the new boats. Great video man.

We've had GREAT luck with Nordlock washers for bolts like this.

Great video, we need more info like this, thanks.

wow what a great video well needed in the industry.. good job boys

Great Info-Really liked it. Thank you and have a Merry Christmas and Happy New Year

Thanks Andy and crew, Merry Christmas to all

Man its funny here in TX how little people work on there own boats, I love turning wrenches on my F250, my merc and what ever else comes undone!!! Iv learned a lot from you guys !!

I like all the videos you guys but I really love the technical videos

Wishing you ANDY & THE ENTIRE TEAM MARINE CREW A VERY MERRY CHRISTMAS & SAFE, PROSPEROUS NEW YEAR!! SPEED, MONEY, NO BRAKES!!!!

I do check these but not very often. Thanks! Will do it now!

Great video, you have a wealth of knowledge. Good on your for sharing it.

Thanks Andy awesome info!

Thank you for this video.. i watch all of them but maintenance is so important and i appreciate it.. I'll definitely be checking my bolts before heading to the river.

Good stuff. Checked mine earlier this season and they were loose. Great reminder !

Merry Christmas and happy new year team marine!

Awesome video Andy!

Great video. I hope you and everyone in the shop has a Merry Christmas and Happy New Year.

Thanks, leash installed last week. Didn’t check jack plate I will this weekend.

Andy, Merry Christmas to you, your family and all of Team Marine!!!

Good video man. I have a bit of ocd and have already done all this but a lot of guys dont think of this.

Thanks Andy and crew. More like this please. I know you said you dont have all the torque specs, but maybe a quick reference if you have the books plus experience handy? Heck we can make a pdf and put it on your site or something. Another idea is: Maybe a trailer maintenance checklist?

Andy, love your videos but I find the "taking the Lords name in vein" offensive, even more so when you use it in conjunction Christmas.

I always tell my old lady the same thing, make sure to maintain the middle too, not just the inner and the outer 😂😂😂.. y'all be careful and have a good Xmas 💪✌️👊

Thanks Andy for the great video . Team marine channel ROCKS! My boat is basically new 26 hours on my Suzuki . At what intervals hour wise would you recommend checking bolts for tightness ? I’m a maintenance freak . Love the channel . Merry Christmas all .

I need a nice suzki sweater like that !!!!

Maintenance helps maintain speed and save money; you still have no brakes. ;-)

Some basic PM stuff goes a long way. I have a 2005 Tahoe with over a quarter million miles.

Like checking the air in your car tires or engine oil 🍺🎣

Have you done a video on aftermarket cavitation plates? Pros/cons?

Let's Go Andy an Jordan

Great video I will check mine out what are the torque specs for atlas to Yamaha sho

Andy, could you go a bit more in-depth on the manual? I have a slidemaster, and the view you gave of the outside only didn't show what I needed. Should the center bolt be always tight?

Where’s the video of the new ranger being cut in half to show how bad it’s being made.

@chrismulch9659

6 ай бұрын

Did they make one ?

Andy why does no one install a Jack Plate on Tin Walleye Boats ? I am looking at a a 18ft with a 115=150hp motor and I never see one with a Jack plate on one for sale new. Is the performance gain not worth the cost. Great Information Andy.

What is the best way to realigned the grease zerks on a Detwiler when they twist away from the access holes to grease? I am able to work on stuff.

Hello, Sir, I would like to ask you. On a manual jack plate do have to use the bar on the jack plate to tighten the bolts or can you just use a shorter bolt and go bolt to nut without a bar?

Also what is a good prop. I want a good setup for my grandson high-school tournament

That’s why 6 bolts are better than 4..On the engine and the boat. More is better

Good morning. What is a good backplate for a Champion 181 DC Merc 150 xr6. I have Detwillee 8"

What are the torque specs for the bolts

Ever thing of slowing down. Your putting a drag motor on a vw in a public place, not a race track.

@TeamMarineService

6 ай бұрын

Jason’s ears perked up when you said drag motor in a vw

you all don't need a leash if you buy a good product to begin with like suzuki or yamaha !!!!!!!!!!!!! lol mercs suck as usual !!!! happy x-mas andy to you and your family !