Team Corally Asuga XLR 6S Roller unboxed and electronic installation
Ойын-сауық
Team Corally Asuga XLR 6S Roller - Blue, Large Scale $379.00
COR00488-B
Where to buy: Free Shipping
www.lhhobby.com/asuga-xlr-6s-...
Castle Creations MMX8X esc $214.95
www.lhhobby.com/Mamba-Monster...
Castle Creation 1650kv motor $209.00
www.lhhobby.com/Sensored-1717...
Savox Black Edition SAVSC1258TG-BE $79.99
www.lhhobby.com/black-edition...
Team Corally Asuga XLR is a high-performance off-road racing buggy that is designed to dominate any terrain it encounters. With its sleek and aerodynamic design, the Asuga XLR is not only visually appealing but also incredibly agile and fast.
Fifteen percent bigger than the average 1/8 buggy, with higher ground clearance, more suspension travel, and oversized components-in short, a completely new chassis that still uses the proven drive components of Corally's existing 6S models. Note the many details, and it will soon become clear to you that the ASUGA XLR has set a new standard for RTR RC cars.
The precision CNC-manufactured aluminum parts, the beautiful red anodization, and the various small details make a big difference.
Required to Complete: Servo, ESC, Motor, 4-6S block or 2x2S and 2x3S LiPo batteries with XT90 connector, appropriate charger, 2.4 GHz 2-channel radio system, and AA batteries for the transmitter.
Features:
"ABEC 3" Rubber sealed ball bearings
Modern shaped front and rear bumpers with skid plate
Oversized composite steering links and rear camber links
Oversized composite camber links
Ultra-rigid hybrid chassis brace system
Oversized (13mm thick) HD composite suspension arms with aluminum anti-tear rings
Front upper arm wing
CNC-Machined 8mm aluminum suspension arm holders
Oversized HD composite "Pillow Ball" steering blocks with anti pop-out design
CNC-Machined 5mm aluminum shock towers
The suspension arm holders are fixed to the chassis with M4 screws
Super smooth 16mm "Big Bore" aluminum shock absorbers
High performance precision CNC-cut hardened steel spur gear
Differential spiral bevel gears and pinions
Strong and Wear-resistant S2 hardened spring steel drive joints and wheel shafts
CNC-Machined adjustable aluminum motor mount
Large battery holder
Low profile Rebel XMS Off-Road tires
Specifications:
Car Model Type: Electric Powered 4WD XL Buggy Roller
Dimensions (LxWxH mm): 574x359x192mm; Wheel Base (mm): 371 mm; Weight (g): 3770 g
Ball Beared: Full Set of Rubber Sealed Ball Bearing
Transmission: 4WD Shaft Driven
Battery Tray Dimensions (LxWxH mm): 160x50.5x63 mm
Visit: www.corally.com/
Web Page: world.corally.com/asuga-2023/
#TeamCorally #Asuga #rcbasher #Asugaxlr #rcbuggy #udrc
Пікірлер: 51
That blue looks GOOD! Congrats on the addition.
@UDRC85
Жыл бұрын
Thank you my guy. Can’t wait to see this guy run tomorrow.
Nice unboxing man. This buggy looks promising. I like the system you chose, good job brother👌
@UDRC85
Жыл бұрын
Thanks big bro. Definitely can’t wait to run it.
Nice bro..I got the same one but rtr.. You'll love the TC rigs..They are some of the best
@UDRC85
Жыл бұрын
It’s my first. I haven’t driven it yet. How do you like yours? Any issues yet?
@philthyco1
Жыл бұрын
@@UDRC85 Tc is top notch never any big issues for me.. The v1's ones had pivot ball and plastic issues but they changed the steering blocks and composite in 2021.. if you want to go past 19-20t pinon you have to remove the pinion guard and get a smaller spur
Looking good. I still haven't gotten mine into the field yet. Weather had us stuck inside but I'm going to get her out this week.
@UDRC85
Жыл бұрын
I appreciate that. Hopefully I can run mine tomorrow. It took a little work to put this rug together but I’m done and ready to play.
Terrific video, as always. I’ve got the Asuga on list of must buy!! Cheers!!
@UDRC85
Жыл бұрын
That is awesome. Thank you for support my channel
Hey man. Just wanted to say grab job with this video. I’ve watched it everyday for the last week trying to decide if I want to pick up an Asuga.
@UDRC85
7 ай бұрын
Hey brother. Sorry for the late response, I don’t get notifications on older vids 😂 it’s a great buggy. I’d upgrade tires, run a 1650kv or so and possible tune diff if it’s not tuned to your liking.
Excellent video!
@UDRC85
Жыл бұрын
Thank you very much. 👊🏾
Nice one. Subbed 🎉
That buggy looks awesome 💯👍
@UDRC85
Жыл бұрын
Thanks brother. It does look really nice. I hope to drive it tomorrow.
@bucksrcs1583
Жыл бұрын
@@UDRC85Your welcome. And cool can't wait untill I see the video buddy 👍
Yessssir! Corally let’s get it 💪🏾🔥💯
@UDRC85
Жыл бұрын
Yes sir!!!! Definitely can’t wait to run this rig. My first Corally and I definitely needed something different and new.
Looking good brother 💯
@UDRC85
Жыл бұрын
Thank you very much. The build quality is awesome. Can’t wait to run it. 💪🏾
Nice Unboxing
@UDRC85
Жыл бұрын
Thank you.
Nice review brother...
Servo is quick 👍🏻
@UDRC85
Жыл бұрын
It sure is. I can not wait to run this buggy.
@ScottMcLinden
Жыл бұрын
@@UDRC85 me either. I think you are going to have a good handling RC with great speed with that set up.
Nice bro
@UDRC85
Жыл бұрын
Yes sir!!
🔥🔥 I bet 17t was Running her 🔥🔥😎👍
Nice! that rx box can kiss my ass though. Definitely not a fan lol, I wasn't used to having to use extension cables for esc wires too. My mmx8s wouldn't fit otherwise. Stock spur is 52t btw! Great video fam!
@UDRC85
Жыл бұрын
Yes bro that rx box was a task. And yes I found out yesterday it was a 52 spur also. I appreciate the info on that also. I can’t wait to run it today. Should be a great time.
I want to know how in the world you got the servo in past the rubber boot for the wires. I’m 0-3 on finding one that fits in
Loving the video. It has help me alot. But one question: what is the wire extension to make sure the esc reach the rx?
@UDRC85
8 ай бұрын
9" (229mm) Universal Servo Extension 22AWG. Thank for watching my videos.
So this kit can run 8s? No problem with battery fitting?
Exelent video ! Definetly the Asuga is the 2024 buggy to buy. Can you please tell me which castle creation motor are you using ? Thanks a lot and congrats on your exelent setting !
@UDRC85
5 ай бұрын
Thank you very much for your comment and the question. I ran a Mamba Monster X 8S, 1717-1650KV Sensored Motor in it.
@eduardonessim4499
5 ай бұрын
@@UDRC85 have you made a video running i with that setting yet ?
Im considering buying this roller. Have a new Spektrum 150 ESC, and new 4S Mojave Motor, and Spektrum DX3 transmitter with 620 Reciever...Will be using a Savox 1250SG servo...If this is the Roller I go with. Spektrum? Cause have chargers and batteries, and famailiar with that system. Do you think all this would fit in this roller?
@UDRC85
7 ай бұрын
I think that will do okay but to be honestly I’d go with a 1650kv Hobbywing or castle system.
So it doesn't come ready to run?
@UDRC85
21 күн бұрын
I bought the roller version. Team Corally also sell a rtr version.
***No reverse*** Why? Was that a technical blip, or on purpose? Either way, why would you NOT want reverse? I was like what
@UDRC85
7 ай бұрын
It a habit from my drag cars and speed run stuff. Some systems will do direct into reverse if you tap the brakes multiple times and I like to do that lol
Trust be. Bypass the rest to ru. Shit. Get a good 8s engine upgraded esc good receiver. That thing will have no limits. IT'S DONKEY TIME YO!
@UDRC85
5 ай бұрын
😂 appreciate the information bruh.
@EriMCardenasRC
5 ай бұрын
@@UDRC85he might be a Traxxas boy🤣🤣
🤩👍👍