Team 1320 All Motor J-series Zoomie Monster J32a2 eg 370whp w/ Oem J35 stroker build
Автокөліктер мен көлік құралдары
Scuba Steve’s all motor j series eg hatch. This is NOT the big built 3.7L motor. This was a j32a2 block with oem j35 components. Stock stroker build
Пікірлер: 159
this is so badass on so many levels, I wish I saw more j series eg swaps
@wendellgreenidge3362
5 жыл бұрын
HardSpaghetti because it’s useless outside of all motor drag racing
@wendellgreenidge3362
5 жыл бұрын
Trevon Adams too much weight over the front end, looks stupid with the engine sticking out the hood or with no hood(that’s just asking for the wrong kind of attention for a daily driver), just not practical
@wendellgreenidge3362
5 жыл бұрын
Trevon Adams how does nothing I say make sense??? Are you serious, you add 2 more cylinders and you have 2 different cylinder heads but it can’t weigh more than a supercharged or turbo k series??? At least then your making well over 300 whp and there nothing you can do that cost effective for the average person to remedy anything I said
@farmanshaikh6405
5 жыл бұрын
@Trevon Adams well said Trevon Adams....I DD my built J35 these day's, after getting rid of regular daily.
@EFVILLAIN626
4 жыл бұрын
Trevon Adams k series weigh about 405 lbs... about the same weight as a b series, j series lightest motor is 560lbs... Idk where you’re info is from but that’s a big weight gain. K series is the best as far as power and weight. Love J swaps and all Honda motors but k’s the way
Love J builds. Too cool.
U got a nice eg there bro one of the nicest I seen keep up the good work
Yeah, Lemon Grove baby!! TB is a local Honda legend in SD since way way back in the day.
*_Dream swap for my eK 😎_* J Swap VS The World!
That bad boy sounds like a beast!
Music from nf to start it off was great.
Love the NF song...nice build
@dylanschomer6301
5 жыл бұрын
Elmer De Leon I felt like not many people knew about him till end of last year or at least here in Nebraska
Beautiful j swap the intake manifold is awesome.
That's awesome. Tomorrow I'm going to cut the exhaust off my Ridgeline and run zoomies headers out the hood!
@jakelance6
5 жыл бұрын
Gay.
Sick ride
It’s so badass!!!
This thing sounds as good as it looks
Sounds like a souped up vw lol dont worry guys i drive a honda i can say that lol
@ogspmex9926
4 жыл бұрын
Sounds like a Japanese v8
@bamboohouseentertainment1473
3 жыл бұрын
Lmaoooo
@reallife4598
3 жыл бұрын
Plz show me one I’m a vw guy look up our v6 plz vr6
@williamwarde3479
3 жыл бұрын
Yeah what are you even talking about?💀
@devindean1167
2 жыл бұрын
It does lmao. I drive a j32 and I’ve never heard one like this lmao
The Glorious Sound of NA motorrrr!!!!!
Awesome J build! What time did it run?
Nice projects
Zomies usually work with some sort of forces induction, any data comparing manifold to them on urs
OMG CAN'T BELIEVES I HAVENT SEEN THIS ONE DAMN
Wat kind of cams are u running? Sounds good bro
Did you guys use j35 rods? I’ve been looking for H-beams for a j32 but I can only find ones for the 35.
Nice chop chop
What cam gears are you using?
dope wurk!
It would make more power with headers with collectors. Zoomies are for blown engines.
@mattcarbaugh5576
Жыл бұрын
Facts. No scavenging effect with zoomies
Love it
I know I’m a little late to this video but to those reading the comments what’s the biggest complications to the transmission when making more power?
Fuckin wicked ride🔥🔥
Love nf
What's the name of the rap when you first start the video?
San Diego represent 👌👌
@2_2_4_3
5 жыл бұрын
@Anthony Rodriguez yea he still is!
How cute...
It’s like can it get louder? And it keeps going and going lol
Did you use j32a2 pistons
How much compression does this build hold?
where can i buy the rear roof spoiler?
Who made the intake manifold
Fuckin sick!!
What Camshafts ? Setup is too live. I have a CL-S myself....
Did you stick with the j32a2 cams or j35a7 cams?
@joeygutierrez2657
5 жыл бұрын
David Ortega prob j35a8
What size front tires
piston compression around 14:0 lol
@youtubeaccount7544
3 жыл бұрын
🥴😍
1:43 Monster screaming.!!
Did you build custom mounts or order them?
@fievel1320
5 жыл бұрын
Isaacj589 hasport mounts
@Isaacj589
5 жыл бұрын
@@fievel1320 thanks man much appreciated
👍
Best sounding civic ever
@kariemmajeed7349
5 жыл бұрын
That's how you get small f****** s*** running
Need a 6 to 1 header sound way better n gain a lil mid n high
Ok a lot of hondas are swapped and I get that but when you put a v6 in a civic hatchback you are wanting more power in the car but I dont understand if you are gonna do a v6 swap then why don't go J37 that you find in the Acuras??? J32 swap is bad ass but a 3.7L vs 3.2 is a big difference
What's ur rod to stoke ratio lol????
Needs a higher rev limiter
@low_funxtion
5 жыл бұрын
Luis Lopez agree
@BlueBerry-qn7ez
5 жыл бұрын
They probably don’t have the VTEC hooked up properly
@BIGSMOKE-bl2lq
5 жыл бұрын
No point reving past the power band
@MOTOHEAD-ko3tq
5 жыл бұрын
And extra 1500 rpm would be perfect
@kareemallmotor
5 жыл бұрын
Why high rev when u got so much tq
How do I make my j series odyssey sound like this holy shit gotamn.
How much this car would worth?
Whats with the crappy shifting?
@krakdaus5442
5 жыл бұрын
What's with the crappy music
@THOMAS01ify
5 жыл бұрын
Its because when you have a motor turn so many rpms the tranny sicromesh is turning to fast to shift cleanly that's why most fwd pro shops opt for a simple upshift drag tranny . Most fed tranny detonates after 400hp
@jdmr.3346
3 жыл бұрын
@@THOMAS01ify They were only spinning the engine to 8k, it shouldn't have any issues with faster shifting.
I dont get it... so your telling me you didnt even hit 400whp?? And the oem rod bolts came/broke off.. i don't believe that... why did aaron oniel make 700-800 whp stock bottom ??
@dominiquediaz6617
3 жыл бұрын
On a j series tho ?
Like X 1000
Love it! But why do people insist on going to eigth mile tracks 😡 shit should be against the law
Technician states air filter
Beast eg project
So j32 with j35 internals results in a 100hp increase over a stock j35??
@joeygutierrez2657
4 жыл бұрын
Chad Mowery no over stock j32a2
@TheBb6prelude
3 жыл бұрын
That’s much more than 100 over stock . Like 130-140 over stock
Coo
lol me with my bone stock J35Z3 dreaming, someday... 6-6 09 accord
What makes it idle like that. Mine is doing it
@rhodybimmers8094
5 жыл бұрын
Shaun Hughes cams
TB is a good guy. Gave me knowledge all the over her in FL back in the day. I’m a few motors since then but currently just got my J32 bottom/J37 Upper Stage 2 cam motor in. Within a few weeks I’ll be fabing the turbo up, just a few small items to take care of. Check my channel out if interested 👍🏻 Great work guys
When you put a J series in a civic is it really heavy in the front and hard to steer?
@krayzie281
5 жыл бұрын
Urban explorer that’s what I wonder
@hondatrix
5 жыл бұрын
He's going straight...
@carterjacobson7761
5 жыл бұрын
Nothing a good set of coils cant do
Brapapapapapapappapappappappaa T_T One day
Awd swap it first j awd
@wendellgreenidge3362
5 жыл бұрын
VetLungs with what tranny?
@davidd6003
5 жыл бұрын
@@wendellgreenidge3362 a cheap 1 dolla tranny😃
@farmanshaikh6405
5 жыл бұрын
Wrong, there are several recorded AWD J swapped civics around...
@zacharygray3442
5 жыл бұрын
j2k awd
@luissantiago2515
5 жыл бұрын
@@wendellgreenidge3362 theres some honda and acura that comes awd with a j series from factory
Some1 is putting a j series motor in a mr2...
bad ass build but man I feel like a full exhaust would sound better. open pipe v6's sound like trash
@joetaylor7442
5 жыл бұрын
Danimal 86 not about the sound for them. Less weight without it.
@danimal865
5 жыл бұрын
@@joetaylor7442 yeah I totally get that, but a side exit behind front tire might add 30 or 40 pounds, I guess it's just cause I hate the sound of an open piped v6 so much
@danimal865
5 жыл бұрын
@James Dildy mine? I have an 03 mustang gt, stock except exhaust and cold air and rims. my "project car" is an 83 jeep J10 stepside with a 360 and a 727 trans.
Is this type build still streetable?
@9Toufonglee
6 жыл бұрын
Kap Loc yea
@demented392rt5
5 жыл бұрын
Not the whole build itself but the swap with bolt ons is
Put that thing on nitro
Why not just buy a j35? Nice build though
@MYKEYSAUTOMOTIVE
6 жыл бұрын
ROBERT CASTILLO the j35a4 block has lower resistant to higher rpms.. the j32a2 block is made Of a different material helps it with higher rpms .. the j35 has nice torque so they interchange the rods and crank .. block is not as good as the j32 block though ..
@rustedratchetgarage6788
6 жыл бұрын
Don't listen to that guy they are the same block 89mm bore stroke is 93mm on the j35 vs 86 on the j32 the 32 has better heads and cams and higher compression pistons so put those with a longer stroke because even in the import game no replacement for displacement
@T3KN0iD
5 жыл бұрын
J35 is the heaviest of the J series, heavier then the J37. J32A2 is the ratio king.
@MYKEYSAUTOMOTIVE
5 жыл бұрын
Jake Browne the j32a2 is a 89 mm
@MYKEYSAUTOMOTIVE
5 жыл бұрын
Jake Browne the sleeves from the j32a2 and j35a4 are made from different material thats why i said they are different.....
I like it and think it's sick I just don't like the noise it makes
Wouldnt it technically be 370bhp not whp...
@rob_e30
5 жыл бұрын
Still wrong actually, bhp is measured before drivetrain loss aka at the crank.
@carterjacobson7761
5 жыл бұрын
@@rob_e30 I though bhp is brake horsepower. What your talking about flywheel horsepower
@rob_e30
5 жыл бұрын
Yes bhp is measured at the flywheel before gearbox/differential loss.
@jarrynsmith
5 жыл бұрын
Whp its at the wheels (or more precise at the hub) and where im from we just say at the flywheel or at the crank, e.g. 650hp at the engine/crankshaft/flywheel usally equals 500hp at the wheels/hubs/tyres, which makes me think BHP should be measured at the wheels but i have be told otherwise by credible people in the past. Im really at a confusion
Sweet build, but theres no way thats 1/4 of a mile, probably 1/8th
@racefan8418
5 жыл бұрын
I was thinking it would crack 6sec in 1/8
j is from nsx ?
@Akuyah.official
5 жыл бұрын
Nah, NSX typically uses C series if im not mistaken, at least Im sure the older models do. Newer models include a Twin-Turbo Hybrid V6. However, this specific motor (j32) usually comes from an Acura Tl (base model) when doing a swap. You can also pull the slightly heavier j35 from either a TL-s or an Odyssey for more high end torque.
@amordeweso
5 жыл бұрын
C32b
@khrrlxm336
5 жыл бұрын
tq guys...
@BrandMalone24
5 жыл бұрын
@@amordeweso c35
@amordeweso
5 жыл бұрын
@@BrandMalone24 false
Sohc
sounds mean
Sounds disgusting 🤟🏽
@straightdooshbags1786
5 жыл бұрын
The j series is a terrible sounding engine, and they never run as fast as people expect them to.
@ichihusni5014
5 жыл бұрын
@kfyeshua well this is a j series engine in the vids. He never say he hate another engine. He just say that j series are greater than what people thinks. On the other hand, you are the one that brings another engine topic on a j series engine vids.
@d3luxeedition364
5 жыл бұрын
kfyeshua stuf fucking pussy
@NexusClipse
5 жыл бұрын
there is a 1100hp j series hatch that’s killing the game right now BTW, Honda is world renown, no matter how much you guys hate, don’t Base every Honda on these fagots driving straight piped single cam motors 😂
God that sounds like shit lmao
Would be faster with a fucking lawn mower engine smh....why would u put this junk motor in anything?