Teak Dining Table Restoration | Furniture Refinishing
Тәжірибелік нұсқаулар және стиль
I restored this teak dining table in about 8 hours over 2 days.
The first day I did steps 1-7 and the next day I did 3 coats of varathane. Please subscribe to support me making more free restoration videos and to get notifications of my next project, a teak hutch and sideboard/credenza!
00:56 Step 1: Use paint stripper to strip off old varnish and dirt.
06:43 Step 2: Clean off remaining paint stripper using mineral spirits.
08:39 Step 3: After drying, sand once with 150 grit sandpaper.
09:33 Step 4: Sand again with 220 grit or finer for a very smooth finish.
10:24 (Optional) How to lighten burn marks with oxalic acid or Barkeeper's Friend
10:57 Step 5: Dust with a tack cloth to remove all sanding dust.
11:55 Step 6: Apply 3 coats of Danish oil, the last coat being a wet-sanded coat for a very smooth finish.
Step 7: Apply an additional protective coating (recommended for heavy use furniture such as a dining table) - see my other KZread videos for this.
16:43 Final Reveal!
If you have any questions, just ask!
Пікірлер: 28
Wow. So nice! I love these restorations. Thanks for sharing.
Absolutely beautiful,,,,love this table
Have this exact table in my office right now. There's 4 matching chairs in the garage. Always meant to redo the leather on the chairs. Maybe one day.
Beautiful job and so fresh and clean 😍
new sub here! love how this turned out! very nice
Lovely...you did a fantastic job...look at it now...precious...beautiful simple lines...so jealous 😍😍😍😍
@nonnosrestoration73
Жыл бұрын
Thank you 🥺
Great job. I have bought a beautiful teak second hand dining suite. I was thinking of sending it to a restorer to have it done, but I’m in two minds as to whether I should do it myself.
Great video! What color of Danish Oil did you use?
What kind of varathane finish did you use? I noticed that you used spray on for a small side table. Did you use that also for this dining room table. Oil or water based? Thank you
How long did you let the first coat of danish oil sit?
Great job....have the same table.... my main section is lighter than the leaves which look almost like new. Should I follow the same procedure? Any specific paint stripper to use?
@nonnosrestoration73
10 ай бұрын
teak changes colour over time so it will be very hard to match them to the leaf... you either have to use a tinted colour to match the darker colour or try lightening the darker wood with oxalic acid... that will be a trial and error to see how light to go. This will be hard if you're a beginner... if you use the leaf mostly for large gatherings covered with a table cloth I wouldn't bother... also if you haven't used the leaf you do not need to refinish it.
This is gorgeous! Beautiful work. I am about to redo a table very similar to this. Can I ask - what varathane product did you use to seal, after the applications of the Danish oil?
@nonnosrestoration73
Жыл бұрын
Thank you! I followed the same exact steps as this video to seal. kzread.info/dash/bejne/Zap91Narj6bRito.html This product might be a bit different on a kitchen table, though. You may want to use something more heavy duty and waterproof. Always protect your teak table after though and never set hot plates directly on it, and clean up water immediately or it will get in the finish.
@nonnosrestoration73
Жыл бұрын
Some people don't do the additional step of sealing... it is in fact, additional. The Danish oil I use has sealer in it so technically, it is fine as is. However, I am extra, AND you have to reapply Danish oil every now and then... but I like to prevent this by using a sealant :) hope that helps. Soon I will finish another kitchen table video!
How do you take care of the dining table when being used? If you get food on it, what to use to clean and maintain?
@nonnosrestoration73
2 жыл бұрын
A damp cloth and wipe dry immediately. Don't put anything hot directly on the wood. Other than that there are a lot of tips online and it depends what you use to seal the table.
We have this exact table and will do as you did. Can’t wait! We however, have old grease stains on the top that I need to deal with first. Any tips? Sanding the glass stains on our teak side tables worked like a charm. Would sanding work for grease too?
@nonnosrestoration73
Жыл бұрын
well if you're stripping it first, try that i would say! sanding might just press it more in there. try a chemical stripper first. also if you're refinishing it anyway, you could just try degreaser or orange oil
@wmitchellsmith
Жыл бұрын
Do you guys know what is the make of this table? I just bought one that looks exactly like this in SF. My friend suggested that he thinks it is a Skovby but there are no markings on my table and the previous owners did not know. My friend found a skovby for sale on Chairish and sent it to me and it looks very similar but mine has the middle piece of wood on the underside that you see (in the table’s profile) in this video that sits between the two leaves when they’re stored and I don’t see that on the skovby my friend sent me. (Also, beautiful restoration and video. Thanks for sharing).
@nonnosrestoration73
Жыл бұрын
@@wmitchellsmith This one had no marks either so I am not sure!
Could you use teak oil instead of danish oil
@nonnosrestoration73
2 жыл бұрын
Yes, you can, just follow the directions of whatever brand you buy!
@sandrahanmer4758
2 жыл бұрын
@@nonnosrestoration73 thank you for responding!
Voice over dude
ɢʀᴇᴀᴛ sᴇʀɪᴇs 😍😍😍😍